ucs_vsans – Configures VSANs on Cisco UCS Manager
ucs_vsans – Configures VSANs on Cisco UCS Manager
New in version 2.5.
Synopsis
- Configures VSANs on Cisco UCS Manager.
- Examples can be used with the UCS Platform Emulator https://communities.cisco.com/ucspe.
Requirements
The below requirements are needed on the host that executes this module.
- ucsmsdk
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
fabric - |
|
The fabric configuration of the VSAN. This can be one of the following: common - The VSAN maps to the same VSAN ID in all available fabrics. A - The VSAN maps to the a VSAN ID that exists only in fabric A. B - The VSAN maps to the a VSAN ID that exists only in fabric B. |
fc_zoning - |
|
Fibre Channel zoning configuration for the Cisco UCS domain. Fibre Channel zoning can be set to one of the following values: disabled — The upstream switch handles Fibre Channel zoning, or Fibre Channel zoning is not implemented for the Cisco UCS domain. enabled — Cisco UCS Manager configures and controls Fibre Channel zoning for the Cisco UCS domain. If you enable Fibre Channel zoning, do not configure the upstream switch with any VSANs that are being used for Fibre Channel zoning. |
hostname string / required |
IP address or hostname of Cisco UCS Manager. | |
name - / required |
The name assigned to the VSAN. This name can be between 1 and 32 alphanumeric characters. You cannot use spaces or any special characters other than - (hyphen), "_" (underscore), : (colon), and . (period). You cannot change this name after the VSAN is created. | |
password string / required |
Password for Cisco UCS Manager authentication. | |
port integer |
Port number to be used during connection (by default uses 443 for https and 80 for http connection). | |
proxy string |
If use_proxy is no, specfies proxy to be used for connection. e.g. 'http://proxy.xy.z:8080' | |
state - |
|
If If |
use_proxy boolean |
|
If |
use_ssl boolean |
|
If |
username string |
Default: "admin" |
Username for Cisco UCS Manager authentication. |
vlan_id - / required |
The unique string identifier assigned to the VLAN used for Fibre Channel connections. Note that Cisco UCS Manager uses VLAN '4048'. See the UCS Manager configuration guide if you want to assign '4048' to a VLAN. Optional if state is absent. | |
vsan_id - / required |
The unique identifier assigned to the VSAN. The ID can be a string between '1' and '4078', or between '4080' and '4093'. '4079' is a reserved VSAN ID. In addition, if you plan to use FC end-host mode, the range between '3840' to '4079' is also a reserved VSAN ID range. Optional if state is absent. |
Examples
- name: Configure VSAN
ucs_vsans:
hostname: 172.16.143.150
username: admin
password: password
name: vsan110
vsan_id: '110'
vlan_id: '110'
- name: Remove VSAN
ucs_vsans:
hostname: 172.16.143.150
username: admin
password: password
name: vsan110
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by an Ansible Partner. [certified]
Authors
- David Soper (@dsoper2)
- CiscoUcs (@CiscoUcs)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/ucs_vsans_module.html