bigip_traffic_group – Manages traffic groups on BIG-IP

From Get docs
Ansible/docs/2.7/modules/bigip traffic group module


bigip_traffic_group – Manages traffic groups on BIG-IP

New in version 2.5.


Synopsis

  • Supports managing traffic groups and their attributes on a BIG-IP.

Requirements

The below requirements are needed on the host that executes this module.

  • f5-sdk >= 3.0.16

Parameters

Parameter Choices/Defaults Comments

mac_address

-

added in 2.6

Specifies the floating Media Access Control (MAC) address associated with the floating IP addresses defined for a traffic group.

Primarily, a MAC masquerade address minimizes ARP communications or dropped packets as a result of failover.

A MAC masquerade address ensures that any traffic destined for a specific traffic group reaches an available device after failover, which happens because along with the traffic group, the MAC masquerade address floats to the available device.

Without a MAC masquerade address, the sending host must learn the MAC address for a newly-active device, either by sending an ARP request or by relying on the gratuitous ARP from the newly-active device.

To unset the MAC address, specify an empty value ("") to this parameter.

name

- / required

The name of the traffic group.

partition

-

Default:

"Common"

Device partition to manage resources on.

password

- / required

The password for the user account used to connect to the BIG-IP.

You may omit this option by setting the environment variable F5_PASSWORD.


aliases: pass, pwd

provider

-

added in 2.5

Default:

null

A dict object containing connection details.

password

- / required

The password for the user account used to connect to the BIG-IP.

You may omit this option by setting the environment variable F5_PASSWORD.


aliases: pass, pwd

server

- / required

The BIG-IP host.

You may omit this option by setting the environment variable F5_SERVER.

server_port

-

Default:

443

The BIG-IP server port.

You may omit this option by setting the environment variable F5_SERVER_PORT.

ssh_keyfile

-

Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports.

You may omit this option by setting the environment variable ANSIBLE_NET_SSH_KEYFILE.

timeout

-

Default:

10

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.

transport

- / required

  • rest
  • cli

Configures the transport connection to use when connecting to the remote device.

user

- / required

The username to connect to the BIG-IP with. This user must have administrative privileges on the device.

You may omit this option by setting the environment variable F5_USER.

validate_certs

boolean

  • no
  • yes

If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.

You may omit this option by setting the environment variable F5_VALIDATE_CERTS.

server

- / required

The BIG-IP host.

You may omit this option by setting the environment variable F5_SERVER.

server_port

-

added in 2.2

Default:

443

The BIG-IP server port.

You may omit this option by setting the environment variable F5_SERVER_PORT.

state

-

  • present

  • absent

When present, ensures that the traffic group exists.

When absent, ensures the traffic group is removed.

user

- / required

The username to connect to the BIG-IP with. This user must have administrative privileges on the device.

You may omit this option by setting the environment variable F5_USER.

validate_certs

boolean

added in 2.0

  • no
  • yes

If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.

You may omit this option by setting the environment variable F5_VALIDATE_CERTS.



Notes

Note

  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
  • Requires the f5-sdk Python package on the host. This is as easy as pip install f5-sdk.
  • Requires BIG-IP software version >= 12.
  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.


Examples

- name: Create a traffic group
  bigip_traffic_group:
    name: foo
    password: secret
    server: lb.mydomain.com
    state: present
    user: admin
  delegate_to: localhost

Status

Authors

  • Tim Rupp (@caphrim007)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/bigip_traffic_group_module.html