aci_epg_to_domain – Bind EPGs to Domains (fv:RsDomAtt)
aci_epg_to_domain – Bind EPGs to Domains (fv:RsDomAtt)
New in version 2.4.
Synopsis
- Bind EPGs to Physical and Virtual Domains on Cisco ACI fabrics.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
allow_useg - |
|
Allows micro-segmentation. The APIC defaults to |
ap - |
Name of an existing application network profile, that will contain the EPGs.
| |
certificate_name - |
The X.509 certificate name attached to the APIC AAA user used for signature-based authentication. It defaults to the
| |
deploy_immediacy - |
|
Determines when the policy is pushed to hardware Policy CAM. The APIC defaults to |
domain - |
Name of the physical or virtual domain being associated with the EPG.
| |
domain_type - |
|
Determines if the Domain is physical (phys) or virtual (vmm).
|
encap integer |
The VLAN encapsulation for the EPG when binding a VMM Domain with static encap_mode. This acts as the secondary encap when using useg. Accepted values range between | |
encap_mode - |
|
The ecapsulataion method to be used. The APIC defaults to |
epg - |
Name of the end point group.
| |
host - / required |
IP Address or hostname of APIC resolvable by Ansible control host.
| |
netflow boolean |
|
Determines if netflow should be enabled. The APIC defaults to |
output_level - |
|
Influence the output of this ACI module.
|
password - / required |
The password to use for authentication. This option is mutual exclusive with | |
port - |
Port number to be used for REST connection. The default value depends on parameter `use_ssl`. | |
primary_encap integer |
Determines the primary VLAN ID when using useg. Accepted values range between | |
private_key - / required |
PEM formatted file that contains your private key to be used for signature-based authentication. The name of the key (without extension) is used as the certificate name in ACI, unless This option is mutual exclusive with
| |
resolution_immediacy - |
|
Determines when the policies should be resolved and available. The APIC defaults to |
state - |
|
Use Use |
tenant - |
Name of an existing tenant.
| |
timeout integer |
Default: 30 |
The socket level timeout in seconds. |
use_proxy boolean |
|
If |
use_ssl boolean |
|
If |
username - |
Default: "admin" |
The username to use for authentication.
|
validate_certs boolean |
|
If This should only set to |
vm_provider - |
|
The VM platform for VMM Domains. Support for Kubernetes was added in ACI v3.0. Support for CloudFoundry, OpenShift and Red Hat was added in ACI v3.1. |
Notes
Note
- The
tenant
,ap
,epg
, anddomain
used must exist before using this module in your playbook. The aci_tenant aci_ap, aci_epg aci_domain modules can be used for this. - OpenStack VMM domains must not be created using this module. The OpenStack VMM domain is created directly by the Cisco APIC Neutron plugin as part of the installation and configuration. This module can be used to query status of an OpenStack VMM domain.
- More information about the internal APIC class fv:RsDomAtt from the APIC Management Information Model reference.
See Also
See also
- Cisco ACI Guide
- Detailed information on how to manage your ACI infrastructure using Ansible.
- Developing Cisco ACI modules
- Detailed guide on how to write your own Cisco ACI modules to contribute.
Examples
- name: Add a new physical domain to EPG binding
aci_epg_to_domain:
host: apic
username: admin
password: SomeSecretPassword
tenant: anstest
ap: anstest
epg: anstest
domain: anstest
domain_type: phys
state: present
delegate_to: localhost
- name: Remove an existing physical domain to EPG binding
aci_epg_to_domain:
host: apic
username: admin
password: SomeSecretPassword
tenant: anstest
ap: anstest
epg: anstest
domain: anstest
domain_type: phys
state: absent
delegate_to: localhost
- name: Query a specific physical domain to EPG binding
aci_epg_to_domain:
host: apic
username: admin
password: SomeSecretPassword
tenant: anstest
ap: anstest
epg: anstest
domain: anstest
domain_type: phys
state: query
delegate_to: localhost
register: query_result
- name: Query all domain to EPG bindings
aci_epg_to_domain:
host: apic
username: admin
password: SomeSecretPassword
state: query
delegate_to: localhost
register: query_result
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
current list |
success |
The existing configuration from the APIC after the module has finished
Sample: [{'fvTenant': {'attributes': {'descr': 'Production environment', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': , 'ownerKey': , 'ownerTag': }}}] |
error dictionary |
failure |
The error information as returned from the APIC
Sample: {'code': '122', 'text': 'unknown managed object class foo'} |
filter_string string |
failure or debug |
The filter string used for the request
Sample: ?rsp-prop-include=config-only |
method string |
failure or debug |
The HTTP method used for the request to the APIC
Sample: POST |
previous list |
info |
The original configuration from the APIC before the module has started
Sample: [{'fvTenant': {'attributes': {'descr': 'Production', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': , 'ownerKey': , 'ownerTag': }}}] |
proposed dictionary |
info |
The assembled configuration from the user-provided parameters
Sample: {'fvTenant': {'attributes': {'descr': 'Production environment', 'name': 'production'}}} |
raw string |
parse error |
The raw output returned by the APIC REST API (xml or json)
Sample:
|
response string |
failure or debug |
The HTTP response from the APIC
Sample: OK (30 bytes) |
sent list |
info |
The actual/minimal configuration pushed to the APIC
Sample: {'fvTenant': {'attributes': {'descr': 'Production environment'}}} |
status integer |
failure or debug |
The HTTP status from the APIC
Sample: 200 |
url string |
failure or debug |
The HTTP url used for the request to the APIC
Sample: |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by an Ansible Partner. [certified]
Authors
- Jacob McGill (@jmcgill298)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/aci_epg_to_domain_module.html