onyx_ospf – Manage OSPF protocol on Mellanox ONYX network devices
onyx_ospf – Manage OSPF protocol on Mellanox ONYX network devices
New in version 2.5.
Synopsis
- This module provides declarative management and configuration of OSPF protocol on Mellanox ONYX network devices.
Parameters
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
interfaces - |
List of interfaces and areas. Required if state=present. | ||
area - / required |
OSPF area. | ||
name - / required |
Intrface name. | ||
ospf - / required |
OSPF instance number 1-65535 | ||
router_id - |
OSPF router ID. Required if state=present. | ||
state - |
|
OSPF state. |
Notes
Note
- Tested on ONYX 3.6.4000
Examples
- name: add ospf router to interface
onyx_ospf:
ospf: 2
router_id: 192.168.8.2
interfaces:
- name: Eth1/1
- area: 0.0.0.0
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
commands list |
always |
The list of configuration mode commands to send to the device.
Sample: ['router ospf 2', 'router-id 192.168.8.2', 'exit', 'interface ethernet 1/1 ip ospf area 0.0.0.0'] |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- Samer Deeb (@samerd)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/onyx_ospf_module.html