ios_vlan – Manage VLANs on IOS network devices

From Get docs
Ansible/docs/2.7/modules/ios vlan module


ios_vlan – Manage VLANs on IOS network devices

New in version 2.5.


Synopsis

  • This module provides declarative management of VLANs on Cisco IOS network devices.

Parameters

Parameter Choices/Defaults Comments

aggregate

-

List of VLANs definitions.

associated_interfaces

-

added in 2.5

This is a intent option and checks the operational state of the for given vlan name for associated interfaces. If the value in the associated_interfaces does not match with the operational state of vlan interfaces on device it will result in failure.

auth_pass

-

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli and become: yes with become_pass.

For more information please see the IOS Platform Options guide.

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

  • no

  • yes

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli and become: yes.

For more information please see the IOS Platform Options guide.

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

delay

-

Default:

10

Delay the play should wait to check for declarative intent params values.

interfaces

- / required

List of interfaces that should be associated to the VLAN.

name

-

Name of the VLAN.

provider

-

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli.

For more information please see the IOS Platform Options guide.

A dict object containing connection details.

auth_pass

-

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

  • no

  • yes

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

host

- / required

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

-

Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

port

-

Default:

22

Specifies the port to use when building the connection to the remote device.

ssh_keyfile

-

Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

timeout

-

Default:

10

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.

username

-

Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

purge

-

Default:

"no"

Purge VLANs not defined in the aggregate parameter.

state

-

  • present

  • absent
  • active
  • suspend

State of the VLAN configuration.

vlan_id

- / required

ID of the VLAN. Range 1-4094.



Notes

Note


Examples

- name: Create vlan
  ios_vlan:
    vlan_id: 100
    name: test-vlan
    state: present

- name: Add interfaces to VLAN
  ios_vlan:
    vlan_id: 100
    interfaces:
      - GigabitEthernet0/0
      - GigabitEthernet0/1

- name: Check if interfaces is assigned to VLAN
  ios_vlan:
    vlan_id: 100
    associated_interfaces:
      - GigabitEthernet0/0
      - GigabitEthernet0/1

- name: Delete vlan
  ios_vlan:
    vlan_id: 100
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

commands

list

always

The list of configuration mode commands to send to the device


Sample:

['vlan 100', 'name test-vlan']




Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Trishna Guha (@trishnaguha)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/ios_vlan_module.html