ce_vxlan_vap – Manages VXLAN virtual access point on HUAWEI CloudEngine Devices.

From Get docs
Ansible/docs/2.7/modules/ce vxlan vap module


ce_vxlan_vap – Manages VXLAN virtual access point on HUAWEI CloudEngine Devices.

New in version 2.4.


Synopsis

  • Manages VXLAN Virtual access point on HUAWEI CloudEngine Devices.

Parameters

Parameter Choices/Defaults Comments

bind_vlan_id

-

Specifies the VLAN binding to a BD(Bridge Domain). The value is an integer ranging ranging from 1 to 4094.

bridge_domain_id

-

Specifies a bridge domain ID. The value is an integer ranging from 1 to 16777215.

ce_vid

-

When encapsulation is 'dot1q', specifies a VLAN ID in the outer VLAN tag. When encapsulation is 'qinq', specifies an outer VLAN ID for double-tagged packets to be received by a Layer 2 sub-interface. The value is an integer ranging from 1 to 4094.

encapsulation

-

  • dot1q
  • default
  • untag
  • qinq
  • none

Specifies an encapsulation type of packets allowed to pass through a Layer 2 sub-interface.

l2_sub_interface

-

Specifies an Sub-Interface full name, i.e. "10GE1/0/41.1". The value is a string of 1 to 63 case-insensitive characters, spaces supported.

pe_vid

-

When encapsulation is 'qinq', specifies an inner VLAN ID for double-tagged packets to be received by a Layer 2 sub-interface. The value is an integer ranging from 1 to 4094.

state

-

  • present

  • absent

Determines whether the config should be present or not on the device.



Examples

- name: vxlan vap module test
  hosts: ce128
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: Create a papping between a VLAN and a BD
    ce_vxlan_vap:
      bridge_domain_id: 100
      bind_vlan_id: 99
      provider: "{{ cli }}"

  - name: Bind a Layer 2 sub-interface to a BD
    ce_vxlan_vap:
      bridge_domain_id: 100
      l2_sub_interface: 10GE2/0/20.1
      provider: "{{ cli }}"

  - name: Configure an encapsulation type on a Layer 2 sub-interface
    ce_vxlan_vap:
      l2_sub_interface: 10GE2/0/20.1
      encapsulation: dot1q
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

changed

boolean

always

check to see if a change was made on the device


Sample:

True

end_state

dictionary

verbose mode

k/v pairs of configuration after module execution


Sample:

{'bridge_domain_id': '100', 'bind_intf_list': ['110GE2/0/20.1', '10GE2/0/20.2'], 'bind_vlan_list': ['99']}

existing

dictionary

verbose mode

k/v pairs of existing configuration


Sample:

{'bridge_domain_id': '100', 'bind_intf_list': ['10GE2/0/20.1', '10GE2/0/20.2'], 'bind_vlan_list': []}

proposed

dictionary

verbose mode

k/v pairs of parameters passed into module


Sample:

{'bridge_domain_id': '100', 'bind_vlan_id': '99', 'state="present"': None}

updates

list

always

commands sent to the device


Sample:

['bridge-domain 100', 'l2 binding vlan 99']




Status

Authors

  • QijunPan (@CloudEngine-Ansible)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/ce_vxlan_vap_module.html