enos_facts – Collect facts from remote devices running Lenovo ENOS

From Get docs
Ansible/docs/2.7/modules/enos facts module


enos_facts – Collect facts from remote devices running Lenovo ENOS

New in version 2.5.


Synopsis

  • Collects a base set of device facts from a remote Lenovo device running on ENOS. This module prepends all of the base network fact keys with ansible_net_<fact>. The facts module will always collect a base set of facts from the device and can enable or disable collection of additional facts.

Parameters

Parameter Choices/Defaults Comments

auth_pass

-

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

  • no

  • yes

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

gather_subset

-

Default:

"!config"

When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all, hardware, config, and interfaces. Can specify a list of values to include a larger subset. Values can also be used with an initial ! to specify that a specific subset should not be collected.

provider

-

A dict object containing connection details.

auth_pass

-

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

  • no

  • yes

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

host

- / required

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

-

Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

port

-

Default:

22

Specifies the port to use when building the connection to the remote device.

ssh_keyfile

-

Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

timeout

-

Default:

10

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.

username

-

Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.



Notes

Note

  • Tested against ENOS 8.4.1


Examples

Tasks: The following are examples of using the module enos_facts.
---
- name: Test Enos Facts
  enos_facts:
    provider={{ cli }}

  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: 22
      username: admin
      password: admin
      transport: cli
      timeout: 30
      authorize: True
      auth_pass:

---
# Collect all facts from the device
- enos_facts:
    gather_subset: all
    provider: "{{ cli }}"

# Collect only the config and default facts
- enos_facts:
    gather_subset:
      - config
    provider: "{{ cli }}"

# Do not collect hardware facts
- enos_facts:
    gather_subset:
      - "!hardware"
    provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

ansible_net_all_ipv4_addresses

list

when interfaces is configured

All IPv4 addresses configured on the device


ansible_net_all_ipv6_addresses

list

when interfaces is configured

All IPv6 addresses configured on the device


ansible_net_config

string

when config is configured

The current active config from the device


ansible_net_gather_subset

list

always

The list of fact subsets collected from the device


ansible_net_hostname

string

always

The configured hostname of the device


ansible_net_image

string

always

Indicates the active image for the device


ansible_net_interfaces

dictionary

when interfaces is configured

A hash of all interfaces running on the system. This gives information on description, mac address, mtu, speed, duplex and operstatus


ansible_net_memfree_mb

integer

when hardware is configured

The available free memory on the remote device in MB


ansible_net_model

string

always

The model name returned from the Lenovo ENOS device


ansible_net_neighbors

dictionary

when interfaces is configured

The list of LLDP neighbors from the remote device


ansible_net_serialnum

string

always

The serial number of the Lenovo ENOS device


ansible_net_version

string

always

The ENOS operating system version running on the remote device





Status

Authors

  • Anil Kumar Muraleedharan (@amuraleedhar)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/enos_facts_module.html