slxos_l3_interface – Manage L3 interfaces on Extreme Networks SLX-OS network devices.
slxos_l3_interface – Manage L3 interfaces on Extreme Networks SLX-OS network devices.
New in version 2.6.
Synopsis
- This module provides declarative management of L3 interfaces on slxos network devices.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
aggregate - |
List of L3 interfaces definitions. Each of the entry in aggregate list should define name of interface | |
ipv4 - |
IPv4 address to be set for the L3 interface mentioned in name option. The address format is /, the mask is number in range 0-32 eg. 192.168.0.1/24 | |
ipv6 - |
IPv6 address to be set for the L3 interface mentioned in name option. The address format is /, the mask is number in range 0-128 eg. fd5d:12c9:2201:1::1/64 | |
name - |
Name of the L3 interface to be configured eg. Ethernet 0/2 | |
state - |
|
State of the L3 interface configuration. It indicates if the configuration should be present or absent on remote device. |
Notes
Note
- Tested against slxos 15.2
Examples
- name: Remove Ethernet 0/3 IPv4 and IPv6 address
slxos_l3_interface:
name: Ethernet 0/3
state: absent
- name: Set Ethernet 0/3 IPv4 address
slxos_l3_interface:
name: Ethernet 0/3
ipv4: 192.168.0.1/24
- name: Set Ethernet 0/3 IPv6 address
slxos_l3_interface:
name: Ethernet 0/3
ipv6: "fd5d:12c9:2201:1::1/64"
- name: Set IP addresses on aggregate
slxos_l3_interface:
aggregate:
- { name: Ethernet 0/3, ipv4: 192.168.2.10/24 }
- { name: Ethernet 0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }
- name: Remove IP addresses on aggregate
slxos_l3_interface:
aggregate:
- { name: Ethernet 0/3, ipv4: 192.168.2.10/24 }
- { name: Ethernet 0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }
state: absent
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
commands list |
always, except for the platforms that use Netconf transport to manage the device. |
The list of configuration mode commands to send to the device
Sample: ['interface Ethernet 0/2', 'ip address 192.168.0.1/24', 'ipv6 address fd5d:12c9:2201:1::1/64'] |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Network Team. [network]
Red Hat Support
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Authors
- Matthew Stone (@bigmstone)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/slxos_l3_interface_module.html