bigip_gtm_virtual_server – Manages F5 BIG-IP GTM virtual servers

New in version 2.6.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis

Manages F5 BIG-IP GTM virtual servers. A GTM server can have many virtual servers associated with it. They are arranged in much the same way that pool members are to pools.

Requirements

The below requirements are needed on the host that executes this module.

f5-sdk >= 3.0.16

Parameters

Parameter		Choices/Defaults	Comments
address - added in 2.6			Specifies the IP Address of the virtual server. When creating a new GTM virtual server, this parameter is required.
availability_requirements - added in 2.6			Specifies, if you activate more than one health monitor, the number of health monitors that must receive successful responses in order for the link to be considered available.
	at_least -		Specifies the minimum number of active health monitors that must be successful before the link is considered up. This parameter is only relevant when a `type` of `at_least` is used. This parameter will be ignored if a type of either `all` or `require` is used.
	number_of_probers -		Specifies the number of probers that should be used when running probes. When creating a new virtual server, if this parameter is specified, then the `number_of_probes` parameter must also be specified. The value of this parameter should always be higher than, or equal to, the value of `number_of_probers`. This parameter is only relevant when a `type` of `require` is used. This parameter will be ignored if a type of either `all` or `at_least` is used.
	number_of_probes -		Specifies the minimum number of probes that must succeed for this server to be declared up. When creating a new virtual server, if this parameter is specified, then the `number_of_probers` parameter must also be specified. The value of this parameter should always be lower than, or equal to, the value of `number_of_probers`. This parameter is only relevant when a `type` of `require` is used. This parameter will be ignored if a type of either `all` or `at_least` is used.
	type -	all at_least require	Monitor rule type when `monitors` is specified. When creating a new virtual, if this value is not specified, the default of 'all' will be used.
limits - added in 2.6			Specifies resource thresholds or limit requirements at the server level. When you enable one or more limit settings, the system then uses that data to take servers in and out of service. You can define limits for any or all of the limit settings. However, when a server does not meet the resource threshold limit requirement, the system marks the entire server as unavailable and directs load-balancing traffic to another resource. The limit settings available depend on the type of server.
	bits_enabled boolean	no yes	Whether the bits limit is enabled or not. This parameter allows you to switch on or off the effect of the limit.
	bits_limit -		Specifies the maximum allowable data throughput rate, in bits per second, for the virtual servers on the server. If the network traffic volume exceeds this limit, the system marks the server as unavailable.
	connections_enabled boolean	no yes	Whether the current connections limit is enabled or not. This parameter allows you to switch on or off the effect of the limit.
	connections_limit -		Specifies the maximum number of concurrent connections, combined, for all of the virtual servers on the server. If the connections exceed this limit, the system marks the server as unavailable.
	packets_enabled boolean	no yes	Whether the packets limit is enabled or not. This parameter allows you to switch on or off the effect of the limit.
	packets_limit -		Specifies the maximum allowable data transfer rate, in packets per second, for the virtual servers on the server. If the network traffic volume exceeds this limit, the system marks the server as unavailable.
link - added in 2.6			Specifies a link to assign to the server or virtual server.
monitors - added in 2.6			Specifies the health monitors that the system currently uses to monitor this resource. When `availability_requirements.type` is `require`, you may only have a single monitor in the `monitors` list.
name - added in 2.6			Specifies the name of the virtual server.
partition - added in 2.6		Default: "Common"	Device partition to manage resources on.
password - / required			The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
port -			Specifies the service port number for the virtual server or pool member. For example, the HTTP service is typically port 80. To specify all ports, use an ``. When creating a new GTM virtual server, if this parameter is not specified, a default of `` will be used.
provider - added in 2.5		Default: null	A dict object containing connection details.
	password - / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server - / required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port -	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	ssh_keyfile -		Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable `ANSIBLE_NET_SSH_KEYFILE`.
	timeout -	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport - / required	rest cli ←	Configures the transport connection to use when connecting to the remote device.
	user - / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
server - / required			The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
server_name - added in 2.6			Specifies the name of the server that the virtual server is associated with.
server_port - added in 2.2		Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
state -		present ← absent enabled disabled	When `present`, ensures that the resource exists. When `absent`, ensures the resource is removed.
translation_address - added in 2.6			Specifies the translation IP address for the virtual server. To unset this parameter, provide an empty string (`""`) as a value. When creating a new GTM virtual server, if this parameter is not specified, a default of `::` will be used.
translation_port - added in 2.6			Specifies the translation port number or service name for the virtual server. To specify all ports, use an ``. When creating a new GTM virtual server, if this parameter is not specified, a default of `` will be used.
user - / required			The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
validate_certs boolean added in 2.0		no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
virtual_server_dependencies - added in 2.6			Specifies the virtual servers on which the current virtual server depends. If any of the specified servers are unavailable, the current virtual server is also listed as unavailable.
	server - / required		Server which the dependant virtual server is part of.
	virtual_server - / required		Virtual server to depend on.

Notes

Note

For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires the f5-sdk Python package on the host. This is as easy as pip install f5-sdk.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Enable virtual server
  bigip_gtm_virtual_server:
    server: lb.mydomain.com
    user: admin
    password: secret
    server_name: server1
    name: my-virtual-server
    state: enabled
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
address string	changed	The new address of the resource. Sample: 1.2.3.4
availability_requirements dictionary	changed	The new availability requirement configurations for the resource. Sample: {'type': 'all'}
limits dictionary	changed	The new limit configurations for the resource. Sample: {'bits_enabled': True, 'bits_limit': 100}
link string	changed	The new link value for the resource. Sample: /Common/my-link
monitors list	changed	The new list of monitors for the resource. Sample: ['/Common/monitor1', '/Common/monitor2']
port integer	changed	The new port of the resource. Sample: 500
server_name string	changed	The server name associated with the virtual server. Sample: /Common/my-gtm-server
translation_address integer	changed	The new translation address of the resource. Sample: 500
translation_port integer	changed	The new translation port of the resource. Sample: 500
virtual_server_dependencies list	changed	The new list of virtual server dependencies for the resource Sample: ['/Common/vs1', '/Common/vs2']

Status

This module is guaranteed to have no backward incompatible interface changes going forward. [stableinterface]
This module is maintained by an Ansible Partner. [certified]

Authors

Tim Rupp (@caphrim007)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/bigip_gtm_virtual_server_module.html