nxos_gir – Trigger a graceful removal or insertion (GIR) of the switch.
nxos_gir – Trigger a graceful removal or insertion (GIR) of the switch.
New in version 2.2.
Synopsis
- Trigger a graceful removal or insertion (GIR) of the switch.
Parameters
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
provider - |
Deprecated Starting with Ansible 2.5 we recommend using This option is only required if you are using NX-API. For more information please see the NXOS Platform Options guide. A dict object containing connection details. | ||
auth_pass - added in 2.5.3 |
Default: "none" |
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable | |
authorize boolean added in 2.5.3 |
|
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable | |
host - / required |
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. | ||
password - |
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable | ||
port - |
Default: "0 (use common port)" |
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443). | |
ssh_keyfile - |
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable | ||
timeout - added in 2.3 |
Default: 10 |
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc). | |
transport - / required |
Default: "cli" |
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi. | |
use_proxy boolean added in 2.5 |
|
If | |
use_ssl boolean |
|
Configures the transport to use SSL if set to true only when the | |
username - |
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable | ||
validate_certs boolean |
|
If | |
state - / required |
|
Specify desired state of the resource. | |
system_mode_maintenance boolean |
|
When | |
system_mode_maintenance_dont_generate_profile boolean |
|
When | |
system_mode_maintenance_on_reload_reset_reason - |
|
Boots the switch into maintenance mode automatically in the event of a specified system crash. Note that not all reset reasons are applicable for all platforms. Also if reset reason is set to match_any, it is not idempotent as it turns on all reset reasons. If reset reason is match_any and state is absent, it turns off all the reset reasons. | |
system_mode_maintenance_shutdown boolean |
|
Shuts down all protocols, vPC domains, and interfaces except the management interface (using the shutdown command). This option is disruptive while | |
system_mode_maintenance_timeout - |
Keeps the switch in maintenance mode for a specified number of minutes. Range is 5-65535. |
Notes
Note
- Tested against NXOSv 7.3.(0)D1(1) on VIRL
state
has effect only in combination withsystem_mode_maintenance_timeout
orsystem_mode_maintenance_on_reload_reset_reason
.- Using
system_mode_maintenance
andsystem_mode_maintenance_dont_generate_profile
would make the module fail, but the system mode will be triggered anyway. - For information on using CLI and NX-API see the NXOS Platform Options guide
- For more information on using Ansible to manage network devices see the Ansible Network Guide
- For more information on using Ansible to manage Cisco devices see the Cisco integration page.
Examples
# Trigger system maintenance mode
- nxos_gir:
system_mode_maintenance: true
host: "{{ inventory_hostname }}"
username: "{{ un }}"
password: "{{ pwd }}"
# Trigger system normal mode
- nxos_gir:
system_mode_maintenance: false
host: "{{ inventory_hostname }}"
username: "{{ un }}"
password: "{{ pwd }}"
# Configure on-reload reset-reason for maintenance mode
- nxos_gir:
system_mode_maintenance_on_reload_reset_reason: manual_reload
state: present
host: "{{ inventory_hostname }}"
username: "{{ un }}"
password: "{{ pwd }}"
# Add on-reload reset-reason for maintenance mode
- nxos_gir:
system_mode_maintenance_on_reload_reset_reason: hw_error
state: present
host: "{{ inventory_hostname }}"
username: "{{ un }}"
password: "{{ pwd }}"
# Remove on-reload reset-reason for maintenance mode
- nxos_gir:
system_mode_maintenance_on_reload_reset_reason: manual_reload
state: absent
host: "{{ inventory_hostname }}"
username: "{{ un }}"
password: "{{ pwd }}"
# Set timeout for maintenance mode
- nxos_gir:
system_mode_maintenance_timeout: 30
state: present
host: "{{ inventory_hostname }}"
username: "{{ un }}"
password: "{{ pwd }}"
# Remove timeout for maintenance mode
- nxos_gir:
system_mode_maintenance_timeout: 30
state: absent
host: "{{ inventory_hostname }}"
username: "{{ un }}"
password: "{{ pwd }}"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
changed boolean |
always |
check to see if a change was made on the device
Sample: True |
final_system_mode string |
verbose mode |
describe the last system mode
Sample: normal |
updates list |
verbose mode |
commands sent to the device
Sample: ['terminal dont-ask', 'system mode maintenance timeout 10'] |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Network Team. [network]
Red Hat Support
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Authors
- Gabriele Gerbino (@GGabriele)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/nxos_gir_module.html