na_ontap_service_processor_network – NetApp ONTAP service processor network
na_ontap_service_processor_network – NetApp ONTAP service processor network
New in version 2.6.
Synopsis
- Modify a ONTAP service processor network
Requirements
The below requirements are needed on the host that executes this module.
- A physical or virtual clustered Data ONTAP system. The modules were developed with Clustered Data ONTAP 9.3
- Ansible 2.6
- netapp-lib (2017.10.30). Install using ‘pip install netapp-lib’
- To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
address_type - / required |
|
Specify address class. |
dhcp - |
|
Specify dhcp type. |
gateway_ip_address - |
Specify the gateway ip. | |
hostname - / required |
The hostname or IP address of the ONTAP instance. | |
http_port integer |
Override the default port (80 or 443) with this port | |
https boolean |
|
Enable and disable https |
ip_address - |
Specify the service processor ip address. | |
is_enabled boolean / required |
|
Specify whether to enable or disable the service processor network. |
netmask - |
Specify the service processor netmask. | |
node - / required |
The node where the service processor network should be enabled | |
password - / required |
Password for the specified user.
| |
prefix_length - |
Specify the service processor prefix_length. | |
state - |
|
Whether the specified service processor network should exist or not. |
username - / required |
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
| |
validate_certs boolean |
|
If set to This should only set to |
Notes
Note
- The modules prefixed with na_ontap are built to support the ONTAP storage platform.
Examples
- name: Modify Service Processor Network
na_ontap_service_processor_network:
state=present
address_type=ipv4
is_enabled=true
dhcp=v4
node=FPaaS-A300-01
node={{ netapp_node }}
username={{ netapp_username }}
password={{ netapp_password }}
hostname={{ netapp_hostname }}
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by an Ansible Partner. [certified]
Authors
- NetApp Ansible Team ([email protected])
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/na_ontap_service_processor_network_module.html