ios_interface – Manage Interface on Cisco IOS network devices

From Get docs
Ansible/docs/2.7/modules/ios interface module


ios_interface – Manage Interface on Cisco IOS network devices

New in version 2.4.


Synopsis

  • This module provides declarative management of Interfaces on Cisco IOS network devices.

Parameters

Parameter Choices/Defaults Comments

aggregate

-

List of Interfaces definitions.

auth_pass

-

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli and become: yes with become_pass.

For more information please see the IOS Platform Options guide.

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

  • no

  • yes

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli and become: yes.

For more information please see the IOS Platform Options guide.

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

delay

-

Default:

10

Time in seconds to wait before checking for the operational state on remote device. This wait is applicable for operational state argument which are state with values up/down, tx_rate and rx_rate.

description

-

Description of Interface.

duplex

-

  • full
  • half
  • auto

Interface link status

enabled

-

Interface link status.

mtu

-

Maximum size of transmit packet.

name

- / required

Name of the Interface.

neighbors

-

Check the operational state of given interface name for CDP/LLDP neighbor.

The following suboptions are available.

host

-

CDP/LLDP neighbor host for given interface name.

port

-

CDP/LLDP neighbor port to which given interface name is connected.

provider

-

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli.

For more information please see the IOS Platform Options guide.

A dict object containing connection details.

auth_pass

-

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

  • no

  • yes

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

host

- / required

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

-

Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

port

-

Default:

22

Specifies the port to use when building the connection to the remote device.

ssh_keyfile

-

Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

timeout

-

Default:

10

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.

username

-

Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

rx_rate

-

Receiver rate in bits per second (bps).

This is state check parameter only.

Supports conditionals, see Conditionals in Networking Modules

speed

-

Interface link speed.

state

-

  • present

  • absent
  • up
  • down

State of the Interface configuration, up means present and operationally up and down means present and operationally down

tx_rate

-

Transmit rate in bits per second (bps).

This is state check parameter only.

Supports conditionals, see Conditionals in Networking Modules



Notes

Note


Examples

- name: configure interface
  ios_interface:
      name: GigabitEthernet0/2
      description: test-interface
      speed: 100
      duplex: half
      mtu: 512

- name: remove interface
  ios_interface:
    name: Loopback9
    state: absent

- name: make interface up
  ios_interface:
    name: GigabitEthernet0/2
    enabled: True

- name: make interface down
  ios_interface:
    name: GigabitEthernet0/2
    enabled: False

- name: Check intent arguments
  ios_interface:
    name: GigabitEthernet0/2
    state: up
    tx_rate: ge(0)
    rx_rate: le(0)

- name: Check neighbors intent arguments
  ios_interface:
    name: Gi0/0
    neighbors:
    - port: eth0
      host: netdev

- name: Config + intent
  ios_interface:
    name: GigabitEthernet0/2
    enabled: False
    state: down

- name: Add interface using aggregate
  ios_interface:
    aggregate:
    - { name: GigabitEthernet0/1, mtu: 256, description: test-interface-1 }
    - { name: GigabitEthernet0/2, mtu: 516, description: test-interface-2 }
    duplex: full
    speed: 100
    state: present

- name: Delete interface using aggregate
  ios_interface:
    aggregate:
    - name: Loopback9
    - name: Loopback10
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

commands

list

always, except for the platforms that use Netconf transport to manage the device.

The list of configuration mode commands to send to the device.


Sample:

['interface GigabitEthernet0/2', 'description test-interface', 'duplex half', 'mtu 512']




Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Ganesh Nalawade (@ganeshrn)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/ios_interface_module.html