onyx_mlag_ipl – Manage IPL (inter-peer link) on Mellanox ONYX network devices
From Get docs
Ansible/docs/2.7/modules/onyx mlag ipl module
onyx_mlag_ipl – Manage IPL (inter-peer link) on Mellanox ONYX network devices
New in version 2.5.
Synopsis
- This module provides declarative management of IPL (inter-peer link) management on Mellanox ONYX network devices.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
name - / required |
Name of the interface (port-channel) IPL should be configured on. | |
peer_address - |
IPL peer IP address. | |
state - |
|
IPL state. |
vlan_interface - |
Name of the IPL vlan interface. |
Notes
Note
- Tested on ONYX 3.6.4000
Examples
- name: run configure ipl
onyx_mlag_ipl:
name: Po1
vlan_interface: Vlan 322
state: present
peer_address: 192.168.7.1
- name: run remove ipl
onyx_mlag_ipl:
name: Po1
state: absent
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
commands list |
always |
The list of configuration mode commands to send to the device.
Sample: ['interface port-channel 1 ipl 1', 'interface vlan 1024 ipl 1 peer-address 10.10.10.10'] |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- Samer Deeb (@samerd)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/onyx_mlag_ipl_module.html