ce_ospf – Manages configuration of an OSPF instance on HUAWEI CloudEngine switches.
ce_ospf – Manages configuration of an OSPF instance on HUAWEI CloudEngine switches.
New in version 2.4.
Synopsis
- Manages configuration of an OSPF instance on HUAWEI CloudEngine switches.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
addr - |
Specifies the address of the network segment where the interface resides. The value is in dotted decimal notation. | |
area - |
Specifies the area ID. The area with the area-id being 0 is a backbone area. Valid values are a string, formatted as an IP address (i.e. "0.0.0.0") or as an integer between 1 and 4294967295. | |
auth_key_id - |
Authentication key id when | |
auth_mode - |
|
Specifies the authentication type. |
auth_text_md5 - |
Specifies a password for MD5, HMAC-MD5, or HMAC-SHA256 authentication. The value is a string of 1 to 255 case-sensitive characters, spaces not supported. | |
auth_text_simple - |
Specifies a password for simple authentication. The value is a string of 1 to 8 characters. | |
mask - |
IP network wildcard bits in decimal format between 0 and 32. | |
max_load_balance - |
The maximum number of paths for forward packets over multiple paths. Valid value is an integer in the range from 1 to 64. | |
nexthop_addr - |
IPv4 address for configure next-hop address's weight. Valid values are a string, formatted as an IP address. | |
nexthop_weight - |
Indicates the weight of the next hop. The smaller the value is, the higher the preference of the route is. It is an integer that ranges from 1 to 254. | |
process_id - / required |
Specifies a process ID. The value is an integer ranging from 1 to 4294967295. | |
state - |
|
Determines whether the config should be present or not on the device. |
Examples
- name: ospf module test
hosts: cloudengine
connection: local
gather_facts: no
vars:
cli:
host: "{{ inventory_hostname }}"
port: "{{ ansible_ssh_port }}"
username: "{{ username }}"
password: "{{ password }}"
transport: cli
tasks:
- name: Configure ospf
ce_ospf:
process_id: 1
area: 100
state: present
provider: "{{ cli }}"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
changed boolean |
always |
check to see if a change was made on the device
Sample: True |
end_state dictionary |
verbose mode |
k/v pairs of configuration after module execution
Sample: {'process_id': '1', 'areas': [{'areaId': '0.0.0.100', 'areaType': 'Normal'}], 'nexthops': [], 'max_load_balance': '32'} |
existing dictionary |
verbose mode |
k/v pairs of existing configuration
Sample: {'process_id': '1', 'areas': [], 'nexthops': [], 'max_load_balance': '32'} |
proposed dictionary |
verbose mode |
k/v pairs of parameters passed into module
Sample: {'process_id': '1', 'area': '100'} |
updates list |
always |
commands sent to the device
Sample: ['ospf 1', 'area 0.0.0.100'] |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- QijunPan (@CloudEngine-Ansible)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/ce_ospf_module.html