nxos_command – Run arbitrary command on Cisco NXOS devices

From Get docs
Ansible/docs/2.7/modules/nxos command module


nxos_command – Run arbitrary command on Cisco NXOS devices

New in version 2.1.


Synopsis

  • Sends an arbitrary command to an NXOS node and returns the results read from the device. This module includes an argument that will cause the module to wait for a specific condition before returning or timing out if the condition is not met.

Parameters

Parameter Choices/Defaults Comments

commands

- / required

The commands to send to the remote NXOS device. The resulting output from the command is returned. If the wait_for argument is provided, the module is not returned until the condition is satisfied or the number of retires as expired.

The commands argument also accepts an alternative form that allows for complex values that specify the command to run and the output format to return. This can be done on a command by command basis. The complex argument supports the keywords command and output where command is the command to run and output is one of 'text' or 'json'.

interval

-

Default:

1

Configures the interval in seconds to wait between retries of the command. If the command does not pass the specified conditional, the interval indicates how to long to wait before trying the command again.

match

-

added in 2.2

Default:

"all"

The match argument is used in conjunction with the wait_for argument to specify the match policy. Valid values are all or any. If the value is set to all then all conditionals in the wait_for must be satisfied. If the value is set to any then only one of the values must be satisfied.

provider

-

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli.

This option is only required if you are using NX-API.

For more information please see the NXOS Platform Options guide.

A dict object containing connection details.

auth_pass

-

added in 2.5.3

Default:

"none"

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

added in 2.5.3

  • no

  • yes

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

host

- / required

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

-

Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

port

-

Default:

"0 (use common port)"

Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).

ssh_keyfile

-

Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

timeout

-

added in 2.3

Default:

10

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).

transport

- / required

Default:

"cli"

Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.

use_proxy

boolean

added in 2.5

  • no
  • yes

If no, the environment variables http_proxy and https_proxy will be ignored.

use_ssl

boolean

  • no

  • yes

Configures the transport to use SSL if set to true only when the transport=nxapi, otherwise this value is ignored.

username

-

Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

validate_certs

boolean

  • no
  • yes

If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.

retries

-

Default:

10

Specifies the number of retries a command should by tried before it is considered failed. The command is run on the target device every retry and evaluated against the wait_for conditionals.

wait_for

-

added in 2.2

Specifies what to evaluate from the output of the command and what conditionals to apply. This argument will cause the task to wait for a particular conditional to be true before moving forward. If the conditional is not true by the configured retries, the task fails. See examples.


aliases: waitfor



Notes

Note


Examples

---
- name: run show version on remote devices
  nxos_command:
    commands: show version

- name: run show version and check to see if output contains Cisco
  nxos_command:
    commands: show version
    wait_for: result[0] contains Cisco

- name: run multiple commands on remote nodes
  nxos_command:
    commands:
      - show version
      - show interfaces

- name: run multiple commands and evaluate the output
  nxos_command:
    commands:
      - show version
      - show interfaces
    wait_for:
      - result[0] contains Cisco
      - result[1] contains loopback0

- name: run commands and specify the output format
  nxos_command:
    commands:
      - command: show version
        output: json

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

failed_conditions

list

failed

The list of conditionals that have failed


Sample:

['...', '...']

stdout

list

always apart from low level errors (such as action plugin)

The set of responses from the commands


Sample:

['...', '...']

stdout_lines

list

always apart from low level errors (such as action plugin)

The value of stdout split into a list


Sample:

[['...', '...'], ['...'], ['...']]




Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Peter Sprygada (@privateip)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/nxos_command_module.html