nxos_l2_interface – Manage Layer-2 interface on Cisco NXOS devices.

From Get docs
Ansible/docs/2.7/modules/nxos l2 interface module


nxos_l2_interface – Manage Layer-2 interface on Cisco NXOS devices.

New in version 2.5.


Synopsis

  • This module provides declarative management of Layer-2 interface on Cisco NXOS devices.

Parameters

Parameter Choices/Defaults Comments

access_vlan

-

Configure given VLAN in access port. If mode=access, used as the access VLAN ID.

aggregate

-

List of Layer-2 interface definitions.

mode

-

  • access
  • trunk

Mode in which interface needs to be configured.

name

- / required

Full name of the interface excluding any logical unit number, i.e. Ethernet1/1.


aliases: interface

native_vlan

-

Native VLAN to be configured in trunk port. If mode=trunk, used as the trunk native VLAN ID.

provider

-

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli.

This option is only required if you are using NX-API.

For more information please see the NXOS Platform Options guide.

A dict object containing connection details.

auth_pass

-

added in 2.5.3

Default:

"none"

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

added in 2.5.3

  • no

  • yes

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

host

- / required

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

-

Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

port

-

Default:

"0 (use common port)"

Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).

ssh_keyfile

-

Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

timeout

-

added in 2.3

Default:

10

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).

transport

- / required

Default:

"cli"

Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.

use_proxy

boolean

added in 2.5

  • no
  • yes

If no, the environment variables http_proxy and https_proxy will be ignored.

use_ssl

boolean

  • no

  • yes

Configures the transport to use SSL if set to true only when the transport=nxapi, otherwise this value is ignored.

username

-

Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

validate_certs

boolean

  • no
  • yes

If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.

state

-

  • present

  • absent
  • unconfigured

Manage the state of the Layer-2 Interface configuration.

trunk_allowed_vlans

-

List of allowed VLANs in a given trunk port. If mode=trunk, these are the only VLANs that will be configured on the trunk, i.e. "2-10,15".

trunk_vlans

-

List of VLANs to be configured in trunk port. If mode=trunk, used as the VLAN range to ADD or REMOVE from the trunk.


aliases: trunk_add_vlans



Notes

Note


Examples

- name: Ensure Eth1/5 is in its default l2 interface state
  nxos_l2_interface:
    name: Ethernet1/5
    state: unconfigured

- name: Ensure Eth1/5 is configured for access vlan 20
  nxos_l2_interface:
    name: Ethernet1/5
    mode: access
    access_vlan: 20

- name: Ensure Eth1/5 only has vlans 5-10 as trunk vlans
  nxos_l2_interface:
    name: Ethernet1/5
    mode: trunk
    native_vlan: 10
    trunk_vlans: 5-10

- name: Ensure eth1/5 is a trunk port and ensure 2-50 are being tagged (doesn't mean others aren't also being tagged)
  nxos_l2_interface:
    name: Ethernet1/5
    mode: trunk
    native_vlan: 10
    trunk_vlans: 2-50

- name: Ensure these VLANs are not being tagged on the trunk
  nxos_l2_interface:
    name: Ethernet1/5
    mode: trunk
    trunk_vlans: 51-4094
    state: absent

-  name: Aggregate Configure interfaces for access_vlan with aggregate
   nxos_l2_interface:
     aggregate:
       - { name: "Ethernet1/2", access_vlan: 6 }
       - { name: "Ethernet1/7", access_vlan: 15 }
     mode: access

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

commands

list

always, except for the platforms that use Netconf transport to manage the device.

The list of configuration mode commands to send to the device


Sample:

['interface eth1/5', 'switchport access vlan 20']




Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Trishna Guha (@trishnaguha)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/nxos_l2_interface_module.html