ironware_config – Manage configuration sections on Extreme Ironware devices

From Get docs
Ansible/docs/2.7/modules/ironware config module


ironware_config – Manage configuration sections on Extreme Ironware devices

New in version 2.5.


Synopsis

  • Extreme Ironware configurations use a simple block indent file syntax for segmenting configuration into sections. This module provides an implementation for working with Ironware configuration sections in a deterministic way.

Parameters

Parameter Choices/Defaults Comments

after

-

The ordered set of commands to append to the end of the command stack if a change needs to be made. Just like with before this allows the playbook designer to append a set of commands to be executed after the command set.

authorize

boolean

  • no

  • yes

Deprecated

Starting with Ansible 2.7 we recommend using connection: network_cli and become: yes.

For more information please see the IronWare Platform Options guide.

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

backup

boolean

  • no

  • yes

This argument will cause the module to create a full backup of the current running-config from the remote device before any changes are made. The backup file is written to the backup folder in the playbook root directory. If the directory does not exist, it is created.

before

-

The ordered set of commands to push on to the command stack if a change needs to be made. This allows the playbook designer the opportunity to perform configuration commands prior to pushing any changes without affecting how the set of commands are matched against the system

commit

-

  • merge

  • check

This argument specifies the update method to use when applying the configuration changes to the remote node. If the value is set to merge the configuration updates are merged with the running- config. If the value is set to check, no changes are made to the remote host.

config

-

The config argument allows the playbook designer to supply the base configuration to be used to validate configuration changes necessary. If this argument is provided, the module will not download the running-config from the remote node.

lines

-

The ordered set of commands that should be configured in the section. The commands must be the exact same commands as found in the device running-config. Be sure to note the configuration command syntax as some commands are automatically modified by the device config parser.


aliases: commands

match

-

  • line

  • strict
  • exact
  • none

Instructs the module on the way to perform the matching of the set of commands against the current device config. If match is set to line, commands are matched line by line. If match is set to strict, command lines are matched with respect to position. If match is set to exact, command lines must be an equal match. Finally, if match is set to none, the module will not attempt to compare the source configuration with the running configuration on the remote device.

parents

-

The ordered set of parents that uniquely identify the section the commands should be checked against. If the parents argument is omitted, the commands are checked against the set of top level or global commands.

provider

-

Deprecated

Starting with Ansible 2.7 we recommend using connection: network_cli and become: yes.

For more information please see the IronWare Platform Options guide.

A dict object containing connection details.

auth_pass

-

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

  • no

  • yes

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

host

-

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

-

Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

port

-

Default:

22

Specifies the port to use when building the connection to the remote device.

ssh_keyfile

-

Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

timeout

-

Default:

10

Specifies idle timeout in seconds for the connection, in seconds. Useful if the console freezes before continuing. For example when saving configurations.

username

-

Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

replace

-

  • line

  • block

Instructs the module on the way to perform the configuration on the device. If the replace argument is set to line then the modified lines are pushed to the device in configuration mode. If the replace argument is set to block then the entire command block is pushed to the device in configuration mode if any line is not correct

save_when

-

added in 2.4

  • always
  • never

  • modified

When changes are made to the device running-configuration, the changes are not copied to non-volatile storage by default. Using this argument will change that before. If the argument is set to always, then the running-config will always be copied to the startup-config and the modified flag will always be set to True. If the argument is set to modified, then the running-config will only be copied to the startup-config if it has changed since the last save to startup-config. If the argument is set to never, the running-config will never be copied to the startup-config

src

-

Specifies the source path to the file that contains the configuration or configuration template to load. The path to the source file can either be the full path on the Ansible control host or a relative path from the playbook or role root directory. This argument is mutually exclusive with lines, parents.

update

-

  • merge

  • check

The update argument controls how the configuration statements are processed on the remote device. Valid choices for the update argument are merge and check. When the argument is set to merge, the configuration changes are merged with the current device running configuration. When the argument is set to check the configuration updates are determined but not actually configured on the remote device.



Notes

Note


Examples

- ironware_config:
    lines:
      - port-name test
      - enable
      - load-interval 30
      - rate-limit input broadcast unknown-unicast multicast 521216 64000
    parents: ['interface ethernet 1/2']

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

backup_path

string

when backup is yes

The full path to the backup file


Sample:

/playbooks/ansible/backup/ironware_config.2016-07-16@22:28:34

updates

list

always

The set of commands that will be pushed to the remote device


Sample:

['...', '...']




Status

Authors

  • Paul Baker (@paulquack)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/ironware_config_module.html