nxos_file_copy – Copy a file to a remote NXOS device.

From Get docs
Ansible/docs/2.7/modules/nxos file copy module


nxos_file_copy – Copy a file to a remote NXOS device.

New in version 2.2.


Synopsis

  • This module supports two different workflows for copying a file to flash (or bootflash) on NXOS devices. Files can either be (1) pushed from the Ansible controller to the device or (2) pulled from a remote SCP file server to the device. File copies are initiated from the NXOS device to the remote SCP server. This module only supports the use of connection network_cli or Cli transport with connection local.

Requirements

The below requirements are needed on the host that executes this module.

  • paramiko (required when file_pull is False)
  • SCPClient (required when file_pull is False)
  • pexpect (required when file_pull is True)

Parameters

Parameter Choices/Defaults Comments

connect_ssh_port

-

added in 2.5

Default:

22

SSH port to connect to server during transfer of file

file_pull

boolean

added in 2.7

  • no

  • yes

When (False) file is copied from the Ansible controller to the NXOS device.

When (True) file is copied from a remote SCP server to the NXOS device. In this mode, the file copy is initiated from the NXOS device.

If the file is already present on the device it will be overwritten and therefore the operation is NOT idempotent.

file_pull_timeout

-

added in 2.7

Default:

300

Use this parameter to set timeout in seconds, when transferring large files or when the network is slow.

file_system

-

Default:

"bootflash:"

The remote file system of the device. If omitted, devices that support a file_system parameter will use their default values.

local_file

path

When (file_pull is False) this is the path to the local file on the Ansible controller. The local directory must exist.

When (file_pull is True) this is the file name used on the NXOS device.

local_file_directory

path

added in 2.7

When (file_pull is True) file is copied from a remote SCP server to the NXOS device, and written to this directory on the NXOS device. If the directory does not exist, it will be created under the file_system. This is an optional parameter.

When (file_pull is False), this not used.

provider

-

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli.

This option is only required if you are using NX-API.

For more information please see the NXOS Platform Options guide.

A dict object containing connection details.

auth_pass

-

added in 2.5.3

Default:

"none"

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

added in 2.5.3

  • no

  • yes

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

host

- / required

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

-

Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

port

-

Default:

"0 (use common port)"

Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).

ssh_keyfile

-

Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

timeout

-

added in 2.3

Default:

10

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).

transport

- / required

Default:

"cli"

Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.

use_proxy

boolean

added in 2.5

  • no
  • yes

If no, the environment variables http_proxy and https_proxy will be ignored.

use_ssl

boolean

  • no

  • yes

Configures the transport to use SSL if set to true only when the transport=nxapi, otherwise this value is ignored.

username

-

Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

validate_certs

boolean

  • no
  • yes

If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.

remote_file

path

When (file_pull is False) this is the remote file path on the NXOS device. If omitted, the name of the local file will be used. The remote directory must exist.

When (file_pull is True) this is the full path to the file on the remote SCP server to be copied to the NXOS device.

remote_scp_server

-

added in 2.7

The remote scp server address which is used to pull the file. This is required if file_pull is True.

remote_scp_server_password

-

added in 2.7

The remote scp server password which is used to pull the file. This is required if file_pull is True.

remote_scp_server_user

-

added in 2.7

The remote scp server username which is used to pull the file. This is required if file_pull is True.



Notes

Note

  • Tested against NXOS 7.0(3)I2(5), 7.0(3)I4(6), 7.0(3)I5(3), 7.0(3)I6(1), 7.0(3)I7(3), 6.0(2)A8(8), 7.0(3)F3(4), 7.3(0)D1(1), 8.3(0)
  • When pushing files (file_pull is False) to the NXOS device, feature scp-server must be enabled.
  • When pulling files (file_pull is True) to the NXOS device, feature scp-server is not required.
  • When pulling files (file_pull is True) to the NXOS device, no transfer will take place if the file is already present.
  • Check mode will tell you if the file would be copied.
  • For information on using CLI and NX-API see the NXOS Platform Options guide
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Cisco devices see the Cisco integration page.


Examples

# File copy from ansible controller to nxos device
  - name: "copy from server to device"
    nxos_file_copy:
      local_file: "./test_file.txt"
      remote_file: "test_file.txt"

# Initiate file copy from the nxos device to transfer file from an SCP server back to the nxos device
  - name: "initiate file copy from device"
    nxos_file_copy:
      file_pull: True
      local_file: "xyz"
      local_filr_directory: "dir1/dir2/dir3"
      remote_file: "/mydir/abc"
      remote_scp_server: "192.168.0.1"
      remote_scp_server_user: "myUser"
      remote_scp_server_password: "myPassword"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

local_file

string

success

The path of the local file.


Sample:

/path/to/local/file

remote_file

string

success

The path of the remote file.


Sample:

/path/to/remote/file

transfer_status

string

success

Whether a file was transferred. "No Transfer" or "Sent". If file_pull is successful, it is set to "Received".


Sample:

Sent




Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Jason Edelman (@jedelman8)
  • Gabriele Gerbino (@GGabriele)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/nxos_file_copy_module.html