ce_vxlan_arp – Manages ARP attributes of VXLAN on HUAWEI CloudEngine devices.

From Get docs
Ansible/docs/2.7/modules/ce vxlan arp module


ce_vxlan_arp – Manages ARP attributes of VXLAN on HUAWEI CloudEngine devices.

New in version 2.4.


Synopsis

  • Manages ARP attributes of VXLAN on HUAWEI CloudEngine devices.

Parameters

Parameter Choices/Defaults Comments

arp_collect_host

-

  • enable
  • disable

Enables EVN BGP or BGP EVPN to collect host information.

arp_suppress

-

  • enable
  • disable

Enables ARP broadcast suppression in a BD.

bridge_domain_id

-

Specifies a BD(bridge domain) ID. The value is an integer ranging from 1 to 16777215.

evn_bgp

-

  • enable
  • disable

Enables EVN BGP.

evn_peer_ip

-

Specifies the IP address of an EVN BGP peer. The value is in dotted decimal notation.

evn_reflect_client

-

  • enable
  • disable

Configures the local device as the route reflector (RR) and its peer as the client.

evn_server

-

  • enable
  • disable

Configures the local device as the router reflector (RR) on the EVN network.

evn_source_ip

-

Specifies the source address of an EVN BGP peer. The value is in dotted decimal notation.

host_collect_protocol

-

  • bgp
  • none

Enables EVN BGP or BGP EVPN to advertise host information.

state

-

  • present

  • absent

Determines whether the config should be present or not on the device.

vbdif_name

-

Full name of VBDIF interface, i.e. Vbdif100.



Examples

- name: vxlan arp module test
  hosts: ce128
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: Configure EVN BGP on Layer 2 and Layer 3 VXLAN gateways to establish EVN BGP peer relationships.
    ce_vxlan_arp:
      evn_bgp: enable
      evn_source_ip: 6.6.6.6
      evn_peer_ip: 7.7.7.7
      provider: "{{ cli }}"
  - name: Configure a Layer 3 VXLAN gateway as a BGP RR.
    ce_vxlan_arp:
      evn_bgp: enable
      evn_server: enable
      provider: "{{ cli }}"
  - name: Enable EVN BGP on a Layer 3 VXLAN gateway to collect host information.
    ce_vxlan_arp:
      vbdif_name: Vbdif100
      arp_collect_host: enable
      provider: "{{ cli }}"
  - name: Enable Layer 2 and Layer 3 VXLAN gateways to use EVN BGP to advertise host information.
    ce_vxlan_arp:
      host_collect_protocol: bgp
      provider: "{{ cli }}"
  - name: Enable ARP broadcast suppression on a Layer 2 VXLAN gateway.
    ce_vxlan_arp:
      bridge_domain_id: 100
      arp_suppress: enable
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

changed

boolean

always

check to see if a change was made on the device


Sample:

True

end_state

dictionary

verbose mode

k/v pairs of configuration after module execution


Sample:

{'evn_bgp': 'enable', 'evn_source_ip': '6.6.6.6', 'evn_peer_ip': ['7.7.7.7']}

existing

dictionary

verbose mode

k/v pairs of existing configuration


Sample:

{'evn_bgp': 'disable', 'evn_source_ip': None, 'evn_peer_ip': []}

proposed

dictionary

verbose mode

k/v pairs of parameters passed into module


Sample:

{'evn_bgp': 'enable', 'evn_source_ip': '6.6.6.6', 'evn_peer_ip': '7.7.7.7', 'state': 'present'}

updates

list

always

commands sent to the device


Sample:

['evn bgp', 'source-address 6.6.6.6', 'peer 7.7.7.7']




Status

Authors

  • QijunPan (@CloudEngine-Ansible)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/ce_vxlan_arp_module.html