ipadm_addr – Manage IP addresses on an interface on Solaris/illumos systems
ipadm_addr – Manage IP addresses on an interface on Solaris/illumos systems
New in version 2.3.
Synopsis
- Create/delete static/dynamic IP addresses on network interfaces on Solaris/illumos systems.
- Up/down static/dynamic IP addresses on network interfaces on Solaris/illumos systems.
- Manage IPv6 link-local addresses on network interfaces on Solaris/illumos systems.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
address - |
Specifiies an IP address to configure in CIDR notation.
| |
addrobj - / required |
Specifies an unique IP address on the system. | |
addrtype - |
|
Specifiies a type of IP address to configure. |
state - |
|
Create/delete/enable/disable an IP address on the network interface. |
temporary - |
Default: "no" |
Specifies that the configured IP address is temporary. Temporary IP addresses do not persist across reboots. |
wait - |
Default: 60 |
Specifies the time in seconds we wait for obtaining address via DHCP. |
Examples
- name: Configure IP address 10.0.0.1 on e1000g0
ipadm_addr: addr=10.0.0.1/32 addrobj=e1000g0/v4 state=present
- name: Delete addrobj
ipadm_addr: addrobj=e1000g0/v4 state=absent
- name: Configure link-local IPv6 address
ipadm_addr: addtype=addrconf addrobj=vnic0/v6
- name: Configure address via DHCP and wait 180 seconds for address obtaining
ipadm_addr: addrobj=vnic0/dhcp addrtype=dhcp wait=180
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
address string |
only if addrtype is 'static' |
IP address
Sample: 1.3.3.7/32 |
addrobj string |
always |
address object name
Sample: bge0/v4 |
addrtype string |
always |
address type
Sample: static |
state string |
always |
state of the target
Sample: present |
temporary boolean |
always |
specifies if operation will persist across reboots
Sample: True |
wait string |
only if addrtype is 'dhcp' |
time we wait for DHCP
Sample: 10 |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- Adam Števko (@xen0l)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/ipadm_addr_module.html