wti.remote.cpm_snmp_config – Set network IPTables parameters in WTI OOB and PDU devices

Note

This plugin is part of the wti.remote collection (version 1.0.1).

To install it use: ansible-galaxy collection install wti.remote.

To use it in a playbook, specify: wti.remote.cpm_snmp_config.

New in version 2.10: of wti.remote

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

Set network IPTables parameters in WTI OOB and PDU devices

Parameters

Parameter	Choices/Defaults	Comments
authpass list / elements=string		Sets the Authentication Password for SNMPv3 (V3 only).
authpriv list / elements=string		Configures the Authentication and Privacy features for SNMPv3 communication, 0 = Auth/NoPriv, 1 = Auth/Priv (V3 only).
authproto list / elements=string		Which authentication protocol will be used, 0 = MD5, 1 = SHA1 (V3 only).
clear integer	0 1	Removes all the users for the protocol being defined before setting the newly defined entries.
contact string		The name of the administrator responsible for SNMP issues.
cpm_password string / required		This is the Password of the WTI device to send the module.
cpm_url string / required		This is the URL of the WTI device to send the module.
cpm_username string / required		This is the Username of the WTI device to send the module.
enable integer	0 1	The activates SNMP polling for the specified interface and protocol.
index list / elements=string		Index of the user being modified (V3 only).
interface string	eth0 eth1 ppp0	The ethernet port for the SNMP we are defining.
location string		The location of the SNMP Server.
privpass list / elements=string		Sets the Privacy Password for SNMPv3 (V3 only) (V3 only).
privproto list / elements=string		Which privacy protocol will be used, 0 = DES, 1 = AES128 (V3 only).
protocol integer	0 1	The protocol that the SNMP entry should be applied. 0 = ipv4, 1 = ipv6.
readonly integer	0 1	Controls the ability to change configuration parameters with SNMP.
rocommunity string		Read Only Community Password, not used for SNMP V3.
rwcommunity string		Read/Write Community Password, not used for SNMP V3.
systemname string		The hostname of the WTI Device.
use_https boolean	no yes ←	Designates to use an https connection or http connection.
use_proxy boolean	no ← yes	Flag to control if the lookup will observe HTTP proxy environment variables when present.
username list / elements=string		Sets the User Name for SNMPv3 access (V3 only).
validate_certs boolean	no yes ←	If false, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates.
version integer	0 1 2	Defined which version of SNMP the device will respond to 0 = V1/V2 Only, 1 = V3 Only, 2 = V1/V2/V3.

Notes

Note

Use groups/cpm in module_defaults to set common options used between CPM modules.

Examples

# Sets the device SNMP Parameters
- name: Set the an SNMP Parameter for a WTI device
  cpm_iptables_config:
    cpm_url: "nonexist.wti.com"
    cpm_username: "super"
    cpm_password: "super"
    interface: "eth0"
    use_https: true
    validate_certs: false
    protocol: 0
    clear: 1
    enable: 1
    readonly: 0
    version: 0
    rocommunity: "ropassword"
    rwcommunity: "rwpassword"

# Sets the device SNMP Parameters
- name: Set the SNMP Parameters a WTI device
  cpm_iptables_config:
    cpm_url: "nonexist.wti.com"
    cpm_username: "super"
    cpm_password: "super"
    use_https: true
    validate_certs: false
    version: 1
    index:
      - 1
      - 2
    username:
      - "username1"
      - "username2"
    authpriv:
      - 1
      - 1
    authpass:
      - "authpass1"
      - "uthpass2"
    authproto:
      - 1
      - 1
    privpass:
      - "authpass1"
      - "uthpass2"
    privproto:
      - 1
      - 1

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key		Returned	Description
data complex		always	The output JSON returned from the commands sent
	snmpaccess dictionary	always	Current k/v pairs of interface info for the WTI device after module execution. Sample: [{'eth0': {'ietf-ipv4': {'clear': 1, 'enable': 0, 'readonly': 0, 'users': [{'authpass': 'testpass', 'authpriv': '1', 'authproto': '0', 'index': '1', 'privpass': 'privpass1', 'privproto': '0', 'username': 'username1'}], 'version': 0}}}]

Authors

Western Telematic Inc. (@wtinetworkgear)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/wti/remote/cpm_snmp_config_module.html