cisco.nxos.nxos_bgp_af – Manages BGP Address-family configuration.

From Get docs
Ansible/docs/2.10/collections/cisco/nxos/nxos bgp af module


cisco.nxos.nxos_bgp_af – Manages BGP Address-family configuration.

Note

This plugin is part of the cisco.nxos collection (version 1.3.1).

To install it use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_bgp_af.


New in version 1.0.0: of cisco.nxos


Synopsis

  • Manages BGP Address-family configurations on NX-OS switches.

Note

This module has a corresponding action plugin.


Parameters

Parameter Choices/Defaults Comments

additional_paths_install

boolean

  • no
  • yes

Install a backup path into the forwarding table and provide prefix independent convergence (PIC) in case of a PE-CE link failure.

additional_paths_receive

boolean

  • no
  • yes

Enables the receive capability of additional paths for all of the neighbors under this address family for which the capability has not been disabled.

additional_paths_selection

string

Configures the capability of selecting additional paths for a prefix. Valid values are a string defining the name of the route-map.

additional_paths_send

boolean

  • no
  • yes

Enables the send capability of additional paths for all of the neighbors under this address family for which the capability has not been disabled.

advertise_l2vpn_evpn

boolean

  • no
  • yes

Advertise evpn routes.

afi

string / required

  • ipv4
  • ipv6
  • vpnv4
  • vpnv6
  • l2vpn

Address Family Identifier.

asn

string / required

BGP autonomous system number. Valid values are String, Integer in ASPLAIN or ASDOT notation.

client_to_client

boolean

  • no
  • yes

Configure client-to-client route reflection.

dampen_igp_metric

string

Specify dampen value for IGP metric-related changes, in seconds. Valid values are integer and keyword 'default'.

dampening_half_time

string

Specify decay half-life in minutes for route-flap dampening. Valid values are integer and keyword 'default'.

dampening_max_suppress_time

string

Specify max suppress time for route-flap dampening stable route. Valid values are integer and keyword 'default'.

dampening_reuse_time

string

Specify route reuse time for route-flap dampening. Valid values are integer and keyword 'default'.

dampening_routemap

string

Specify route-map for route-flap dampening. Valid values are a string defining the name of the route-map.

dampening_state

boolean

  • no
  • yes

Enable/disable route-flap dampening.

dampening_suppress_time

string

Specify route suppress time for route-flap dampening. Valid values are integer and keyword 'default'.

default_information_originate

boolean

  • no
  • yes

Default information originate.

default_metric

string

Sets default metrics for routes redistributed into BGP. Valid values are Integer or keyword 'default'

distance_ebgp

string

Sets the administrative distance for eBGP routes. Valid values are Integer or keyword 'default'.

distance_ibgp

string

Sets the administrative distance for iBGP routes. Valid values are Integer or keyword 'default'.

distance_local

string

Sets the administrative distance for local BGP routes. Valid values are Integer or keyword 'default'.

inject_map

list / elements=list

An array of route-map names which will specify prefixes to inject. Each array entry must first specify the inject-map name, secondly an exist-map name, and optionally the copy-attributes keyword which indicates that attributes should be copied from the aggregate. For example [['lax_inject_map', 'lax_exist_map'], ['nyc_inject_map', 'nyc_exist_map', 'copy-attributes'], ['fsd_inject_map', 'fsd_exist_map']].

maximum_paths

string

Configures the maximum number of equal-cost paths for load sharing. Valid value is an integer in the range 1-64.

maximum_paths_ibgp

string

Configures the maximum number of ibgp equal-cost paths for load sharing. Valid value is an integer in the range 1-64.

networks

list / elements=list

Networks to configure. Valid value is a list of network prefixes to advertise. The list must be in the form of an array. Each entry in the array must include a prefix address and an optional route-map. For example [['10.0.0.0/16', 'routemap_LA'], ['192.168.1.1', 'Chicago'], ['192.168.2.0/24'], ['192.168.3.0/24', 'routemap_NYC']].

next_hop_route_map

string

Configure a route-map for valid nexthops. Valid values are a string defining the name of the route-map.

provider

dictionary

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli.

Starting with Ansible 2.6 we recommend using connection: httpapi for NX-API.

This option will be removed in a release after 2022-06-01.

For more information please see the NXOS Platform Options guide.

A dict object containing connection details.

auth_pass

string

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

  • no ←

  • yes

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

host

string

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

string

Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

port

integer

Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).

ssh_keyfile

string

Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

timeout

integer

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).

transport

string

  • cli ←

  • nxapi

Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.

use_proxy

boolean

  • no

  • yes ←

If no, the environment variables http_proxy and https_proxy will be ignored.

use_ssl

boolean

  • no ←

  • yes

Configures the transport to use SSL if set to yes only when the transport=nxapi, otherwise this value is ignored.

username

string

Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

validate_certs

boolean

  • no ←

  • yes

If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.

redistribute

list / elements=list

A list of redistribute directives. Multiple redistribute entries are allowed. The list must be in the form of a nested array. the first entry of each array defines the source-protocol to redistribute from; the second entry defines a route-map name. A route-map is highly advised but may be optional on some platforms, in which case it may be omitted from the array list. For example [['direct', 'rm_direct'], ['lisp', 'rm_lisp']].

retain_route_target

string

added in 1.1.0 of cisco.nxos

Retains all of the routes or the routes which are part of configured route-map. Valid values are route-map names or keyword all or keyword default. all retains all the routes regardless of Target-VPN community. default will disable the retain route target option. If you are using route-map name please ensure that the name is not same as all and default.

safi

string / required

  • unicast
  • multicast
  • evpn

Sub Address Family Identifier.

state

string

  • present ←

  • absent

Determines whether the config should be present or not on the device.

suppress_inactive

boolean

  • no
  • yes

Advertises only active routes to peers.

table_map

string

Apply table-map to filter routes downloaded into URIB. Valid values are a string.

table_map_filter

boolean

  • no
  • yes

Filters routes rejected by the route-map and does not download them to the RIB.

vrf

string

Default:

"default"

Name of the VRF. The name 'default' is a valid VRF representing the global bgp.



Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL
  • state=absent removes the whole BGP ASN configuration
  • Default, where supported, restores params default value.
  • For information on using CLI and NX-API see the NXOS Platform Options guide
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Cisco devices see the Cisco integration page.


Examples

# configure a simple address-family
- cisco.nxos.nxos_bgp_af:
    asn: 65535
    vrf: TESTING
    afi: ipv4
    safi: unicast
    advertise_l2vpn_evpn: true
    state: present
    retain_route_target: all

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

commands

list / elements=string

always

commands sent to the device


Sample:

['router bgp 65535', 'vrf TESTING', 'address-family ipv4 unicast', 'advertise l2vpn evpn', 'retain route-target all']




Authors

  • Gabriele Gerbino (@GGabriele)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/nxos/nxos_bgp_af_module.html


Retrieved from "https://getdocs.org/index.php?title=Ansible/docs/2.10/collections/cisco/nxos/nxos_bgp_af_module&oldid=56043"
Powered by MediaWiki