wti.remote.cpm_interface_info – Get network interface parameters from WTI OOB and PDU devices
wti.remote.cpm_interface_info – Get network interface parameters from WTI OOB and PDU devices
Note
This plugin is part of the wti.remote collection (version 1.0.1).
To install it use: ansible-galaxy collection install wti.remote
.
To use it in a playbook, specify: wti.remote.cpm_interface_info
.
New in version 2.10: of wti.remote
Synopsis
- Get network interface parameters from WTI OOB and PDU devices
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
cpm_password string / required |
This is the Password of the WTI device to send the module. | |
cpm_url string / required |
This is the URL of the WTI device to send the module. | |
cpm_username string / required |
This is the Username of the WTI device to send the module. | |
interface list / elements=string |
|
This is the ethernet port name that is getting retrieved. It can include a single ethernet port name, multiple ethernet port names separated by commas or not defined for all ports. |
use_https boolean |
|
Designates to use an https connection or http connection. |
use_proxy boolean |
|
Flag to control if the lookup will observe HTTP proxy environment variables when present. |
validate_certs boolean |
|
If false, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. |
Notes
Note
- Use
groups/cpm
inmodule_defaults
to set common options used between CPM modules.)
Examples
- name: Get the network interface Parameters for a WTI device for all interfaces
cpm_interface_info:
cpm_url: "nonexist.wti.com"
cpm_username: "super"
cpm_password: "super"
use_https: true
validate_certs: false
- name: Get the network interface Parameters for a WTI device for a specific interface
cpm_interface_info:
cpm_url: "nonexist.wti.com"
cpm_username: "super"
cpm_password: "super"
interface: "eth0,eth1"
use_https: false
validate_certs: false
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description | |
---|---|---|---|
data complex |
always |
The output JSON returned from the commands sent
| |
interface dictionary |
always |
Current k/v pairs of interface info for the WTI device after module execution.
Sample: {'ietf-ipv4': {'address': [{'gateway': , 'ip': '10.10.10.2', 'netmask': '255.255.255.0'}], 'dhcpclient': [{'enable': 0, 'hostname': , 'lease': -1, 'obdns': 1, 'updns': 1}]}, 'ietf-ipv6': {'address': [{'gateway': , 'ip': , 'netmask': }]}, 'is_gig': '1', 'is_up': '0', 'mac_address': '00-09-9b-02-45-db', 'name': 'eth1', 'negotiation': '0', 'speed': '10', 'type': '0'} | |
totalports integer |
success |
Total ethernet ports requested of the WTI device.
Sample: 1 |
Authors
- Western Telematic Inc. (@wtinetworkgear)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/wti/remote/cpm_interface_info_module.html