vyos.vyos.vyos_firewall_rules – FIREWALL rules resource module

Note

This plugin is part of the vyos.vyos collection (version 1.1.0).

To install it use: ansible-galaxy collection install vyos.vyos.

To use it in a playbook, specify: vyos.vyos.vyos_firewall_rules.

New in version 1.0.0: of vyos.vyos

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

This module manages firewall rule-set attributes on VyOS devices

Note

This module has a corresponding action plugin.

Parameters

Parameter						Choices/Defaults	Comments
config list / elements=dictionary							A dictionary of Firewall rule-set options.
	afi string / required					ipv4 ipv6	Specifies the type of rule-set.
	rule_sets list / elements=dictionary						The Firewall rule-set list.
		default_action string				drop reject accept	Default action for rule-set. drop (Drop if no prior rules are hit (default)) reject (Drop and notify source if no prior rules are hit) accept (Accept if no prior rules are hit)
		description string					Rule set description.
		enable_default_log boolean				no yes	Option to log packets hitting default-action.
		name string					Firewall rule set name.
		rules list / elements=dictionary					A ditionary that specifies the rule-set configurations.
			action string			drop reject accept inspect	Specifying the action.
			description string				Description of this rule.
			destination dictionary				Specifying the destination parameters.
				address string			Destination ip address subnet or range. IPv4/6 address, subnet or range to match. Match everything except the specified address, subnet or range. Destination ip address subnet or range.
				group dictionary			Destination group.
					address_group string		Group of addresses.
					network_group string		Group of networks.
					port_group string		Group of ports.
				port string			Multiple destination ports can be specified as a comma-separated list. The whole list can also be "negated" using '!'. For example:'!22,telnet,http,123,1001-1005'.
			disabled boolean			no yes	Option to disable firewall rule.
			fragment string			match-frag match-non-frag	IP fragment match.
			icmp dictionary				ICMP type and code information.
				code integer			ICMP code.
				type integer			ICMP type.
				type_name string		any echo-reply destination-unreachable network-unreachable host-unreachable protocol-unreachable port-unreachable fragmentation-needed source-route-failed network-unknown host-unknown network-prohibited host-prohibited TOS-network-unreachable TOS-host-unreachable communication-prohibited host-precedence-violation precedence-cutoff source-quench redirect network-redirect host-redirect TOS-network-redirect TOS-host-redirect echo-request router-advertisement router-solicitation time-exceeded ttl-zero-during-transit ttl-zero-during-reassembly parameter-problem ip-header-bad required-option-missing timestamp-request timestamp-reply address-mask-request address-mask-reply ping pong ttl-exceeded	ICMP type-name.
			ipsec string			match-ipsec match-none	Inboud ip sec packets.
			limit dictionary				Rate limit using a token bucket filter.
				burst integer			Maximum number of packets to allow in excess of rate.
				rate dictionary			format for rate (integer/time unit). any one of second, minute, hour or day may be used to specify time unit. eg. 1/second implies rule to be matched at an average of once per second.
					number integer		This is the integer value.
					unit string		This is the time unit.
			number integer / required				Rule number.
			p2p list / elements=dictionary				P2P application packets.
				application string		all applejuice bittorrent directconnect edonkey gnutella kazaa	Name of the application.
			protocol string				Protocol to match (protocol name in /etc/protocols or protocol number or all). IP protocol name from /etc/protocols (e.g. "tcp" or "udp"). <0-255> IP protocol number. tcp_udp Both TCP and UDP. all All IP protocols. (!)All IP protocols except for the specified name or number.
			recent dictionary				Parameters for matching recently seen sources.
				count integer			Source addresses seen more than N times.
				time integer			Source addresses seen in the last N seconds.
			source dictionary				Source parameters.
				address string			Source ip address subnet or range. IPv4/6 address, subnet or range to match. Match everything except the specified address, subnet or range. Source ip address subnet or range.
				group dictionary			Source group.
					address_group string		Group of addresses.
					network_group string		Group of networks.
					port_group string		Group of ports.
				mac_address string			MAC address to match. Match everything except the specified MAC address.
				port string			Multiple source ports can be specified as a comma-separated list. The whole list can also be "negated" using '!'. For example:'!22,telnet,http,123,1001-1005'.
			state dictionary				Session state.
				established boolean		no yes	Established state.
				invalid boolean		no yes	Invalid state.
				new boolean		no yes	New state.
				related boolean		no yes	Related state.
			tcp dictionary				TCP flags to match.
				flags string			TCP flags to be matched.
			time dictionary				Time to match rule.
				monthdays string			Monthdays to match rule on.
				startdate string			Date to start matching rule.
				starttime string			Time of day to start matching rule.
				stopdate string			Date to stop matching rule.
				stoptime string			Time of day to stop matching rule.
				utc boolean		no yes	Interpret times for startdate, stopdate, starttime and stoptime to be UTC.
				weekdays string			Weekdays to match rule on.
running_config string							This option is used only with state parsed. The value of this option should be the output received from the VyOS device by executing the command show configuration commands \| grep firewall. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string						merged ← replaced overridden deleted gathered rendered parsed	The state the configuration should be left in

Notes

Note

Tested against VyOS 1.1.8 (helium).
This module works with connection network_cli. See the VyOS OS Platform Options.

Examples

# Using deleted to delete firewall rules based on rule-set name
#
# Before state
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall name Downlink default-action 'accept'
# set firewall name Downlink description 'IPv4 INBOUND rule set'
# set firewall name Downlink rule 501 action 'accept'
# set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'
# set firewall name Downlink rule 501 ipsec 'match-ipsec'
# set firewall name Downlink rule 502 action 'reject'
# set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'
# set firewall name Downlink rule 502 ipsec 'match-ipsec'
#
- name: Delete attributes of given firewall rules.
  vyos.vyos.vyos_firewall_rules:
    config:
    - afi: ipv4
      rule_sets:
      - name: Downlink
    state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
#    "before": [
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "Downlink",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 501 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 501
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 502 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 502
#                        }
#                    ]
#               }
#            ]
#        }
#    ]
#    "commands": [
#        "delete firewall name Downlink"
#    ]
#
# "after": []
# After state
# ------------
# vyos@vyos# run show configuration commands | grep firewall
# set firewall group address-group 'inbound'


# Using deleted to delete firewall rules based on afi
#
# Before state
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall ipv6-name UPLINK rule 1 action 'accept'
# set firewall ipv6-name UPLINK rule 1
# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'
# set firewall ipv6-name UPLINK rule 2 action 'accept'
# set firewall ipv6-name UPLINK rule 2
# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'
# set firewall group address-group 'inbound'
# set firewall name Downlink default-action 'accept'
# set firewall name Downlink description 'IPv4 INBOUND rule set'
# set firewall name Downlink rule 501 action 'accept'
# set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'
# set firewall name Downlink rule 501 ipsec 'match-ipsec'
# set firewall name Downlink rule 502 action 'reject'
# set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'
# set firewall name Downlink rule 502 ipsec 'match-ipsec'

#
- name: Delete attributes of given firewall rules.
  vyos.vyos.vyos_firewall_rules:
    config:
    - afi: ipv4
    state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
#    "before": [
#        {
#            "afi": "ipv6",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "This is ipv6 specific rule-set",
#                    "name": "UPLINK",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 1 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 1
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 2 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 2
#                        }
#                    ]
#                }
#            ]
#        },
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "Downlink",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 501 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 501
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 502 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 502
#                        }
#                    ]
#               }
#            ]
#        }
#    ]
#    "commands": [
#        "delete firewall name"
#    ]
#
# "after": []
# After state
# ------------
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall ipv6-name UPLINK rule 1 action 'accept'
# set firewall ipv6-name UPLINK rule 1
# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'
# set firewall ipv6-name UPLINK rule 2 action 'accept'
# set firewall ipv6-name UPLINK rule 2
# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'


# Using deleted to delete all the the firewall rules when provided config is empty
#
# Before state
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall name Downlink default-action 'accept'
# set firewall name Downlink description 'IPv4 INBOUND rule set'
# set firewall name Downlink rule 501 action 'accept'
# set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'
# set firewall name Downlink rule 501 ipsec 'match-ipsec'
# set firewall name Downlink rule 502 action 'reject'
# set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'
# set firewall name Downlink rule 502 ipsec 'match-ipsec'
#
- name: Delete attributes of given firewall rules.
  vyos.vyos.vyos_firewall_rules:
    config:
    state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
#    "before": [
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "Downlink",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 501 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 501
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 502 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 502
#                        }
#                    ]
#               }
#            ]
#        }
#    ]
#    "commands": [
#        "delete firewall name"
#    ]
#
# "after": []
# After state
# ------------
# vyos@vyos# run show configuration commands | grep firewall
# set firewall group address-group 'inbound'


# Using merged
#
# Before state:
# -------------
#
# vyos@vyos# run show  configuration commands | grep firewall
# set firewall group address-group 'inbound'
#
- name: Merge the provided configuration with the exisiting running configuration
  vyos.vyos.vyos_firewall_rules:
    config:
    - afi: ipv6
      rule_sets:
      - name: UPLINK
        description: This is ipv6 specific rule-set
        default_action: accept
        rules:
        - number: 1
          action: accept
          description: Fwipv6-Rule 1 is configured by Ansible
          ipsec: match-ipsec
        - number: 2
          action: accept
          description: Fwipv6-Rule 2 is configured by Ansible
          ipsec: match-ipsec

    - afi: ipv4
      rule_sets:
      - name: INBOUND
        description: IPv4 INBOUND rule set
        default_action: accept
        rules:
        - number: 101
          action: accept
          description: Rule 101 is configured by Ansible
          ipsec: match-ipsec
        - number: 102
          action: reject
          description: Rule 102 is configured by Ansible
          ipsec: match-ipsec
        - number: 103
          action: accept
          description: Rule 103 is configured by Ansible
          destination:
            group:
              address_group: inbound
          source:
            address: 192.0.2.0
          state:
            established: true
            new: false
            invalid: false
            related: true
    state: merged
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# before": []
#
#    "commands": [
#       "set firewall ipv6-name UPLINK default-action 'accept'",
#       "set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'",
#       "set firewall ipv6-name UPLINK rule 1 action 'accept'",
#       "set firewall ipv6-name UPLINK rule 1",
#       "set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'",
#       "set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'",
#       "set firewall ipv6-name UPLINK rule 2 action 'accept'",
#       "set firewall ipv6-name UPLINK rule 2",
#       "set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'",
#       "set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'",
#       "set firewall name INBOUND default-action 'accept'",
#       "set firewall name INBOUND description 'IPv4 INBOUND rule set'",
#       "set firewall name INBOUND rule 101 action 'accept'",
#       "set firewall name INBOUND rule 101",
#       "set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'",
#       "set firewall name INBOUND rule 101 ipsec 'match-ipsec'",
#       "set firewall name INBOUND rule 102 action 'reject'",
#       "set firewall name INBOUND rule 102",
#       "set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'",
#       "set firewall name INBOUND rule 102 ipsec 'match-ipsec'",
#       "set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'",
#       "set firewall name INBOUND rule 103 destination group address-group inbound",
#       "set firewall name INBOUND rule 103",
#       "set firewall name INBOUND rule 103 source address 192.0.2.0",
#       "set firewall name INBOUND rule 103 state established enable",
#       "set firewall name INBOUND rule 103 state related enable",
#       "set firewall name INBOUND rule 103 state invalid disable",
#       "set firewall name INBOUND rule 103 state new disable",
#       "set firewall name INBOUND rule 103 action 'accept'"
#    ]
#
# "after": [
#        {
#            "afi": "ipv6",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "This is ipv6 specific rule-set",
#                    "name": "UPLINK",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 1 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 1
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 2 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 2
#                        }
#                    ]
#                }
#            ]
#        },
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "INBOUND",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 101 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 101
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 102 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 102
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Rule 103 is configured by Ansible",
#                            "destination": {
#                                "group": {
#                                    "address_group": "inbound"
#                                }
#                            },
#                            "number": 103,
#                            "source": {
#                                "address": "192.0.2.0"
#                            },
#                            "state": {
#                                "established": true,
#                                "invalid": false,
#                                "new": false,
#                                "related": true
#                            }
#                        }
#                    ]
#                }
#            ]
#        }
#    ]
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall ipv6-name UPLINK rule 1 action 'accept'
# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'
# set firewall ipv6-name UPLINK rule 2 action 'accept'
# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'
# set firewall name INBOUND default-action 'accept'
# set firewall name INBOUND description 'IPv4 INBOUND rule set'
# set firewall name INBOUND rule 101 action 'accept'
# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'
# set firewall name INBOUND rule 101 ipsec 'match-ipsec'
# set firewall name INBOUND rule 102 action 'reject'
# set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'
# set firewall name INBOUND rule 102 ipsec 'match-ipsec'
# set firewall name INBOUND rule 103 action 'accept'
# set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'
# set firewall name INBOUND rule 103 destination group address-group 'inbound'
# set firewall name INBOUND rule 103 source address '192.0.2.0'
# set firewall name INBOUND rule 103 state established 'enable'
# set firewall name INBOUND rule 103 state invalid 'disable'
# set firewall name INBOUND rule 103 state new 'disable'
# set firewall name INBOUND rule 103 state related 'enable'


# Using replaced
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall ipv6-name UPLINK rule 1 action 'accept'
# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'
# set firewall ipv6-name UPLINK rule 2 action 'accept'
# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'
# set firewall name INBOUND default-action 'accept'
# set firewall name INBOUND description 'IPv4 INBOUND rule set'
# set firewall name INBOUND rule 101 action 'accept'
# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'
# set firewall name INBOUND rule 101 ipsec 'match-ipsec'
# set firewall name INBOUND rule 102 action 'reject'
# set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'
# set firewall name INBOUND rule 102 ipsec 'match-ipsec'
# set firewall name INBOUND rule 103 action 'accept'
# set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'
# set firewall name INBOUND rule 103 destination group address-group 'inbound'
# set firewall name INBOUND rule 103 source address '192.0.2.0'
# set firewall name INBOUND rule 103 state established 'enable'
# set firewall name INBOUND rule 103 state invalid 'disable'
# set firewall name INBOUND rule 103 state new 'disable'
# set firewall name INBOUND rule 103 state related 'enable'
#
- name: Replace device configurations of listed firewall rules with provided configurations
  vyos.vyos.vyos_firewall_rules:
    config:
    - afi: ipv6
      rule_sets:
      - name: UPLINK
        description: This is ipv6 specific rule-set
        default_action: accept
    - afi: ipv4
      rule_sets:
      - name: INBOUND
        description: IPv4 INBOUND rule set
        default_action: accept
        rules:
        - number: 101
          action: accept
          description: Rule 101 is configured by Ansible
          ipsec: match-ipsec
        - number: 104
          action: reject
          description: Rule 104 is configured by Ansible
          ipsec: match-none
    state: replaced
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "afi": "ipv6",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "This is ipv6 specific rule-set",
#                    "name": "UPLINK",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 1 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 1
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 2 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 2
#                        }
#                    ]
#                }
#            ]
#        },
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "INBOUND",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 101 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 101
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 102 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 102
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Rule 103 is configured by Ansible",
#                            "destination": {
#                                "group": {
#                                    "address_group": "inbound"
#                                }
#                            },
#                            "number": 103,
#                            "source": {
#                                "address": "192.0.2.0"
#                            },
#                            "state": {
#                                "established": true,
#                                "invalid": false,
#                                "new": false,
#                                "related": true
#                            }
#                        }
#                    ]
#                }
#            ]
#        }
#    ]
#
# "commands": [
#        "delete firewall ipv6-name UPLINK rule 1",
#        "delete firewall ipv6-name UPLINK rule 2",
#        "delete firewall name INBOUND rule 102",
#        "delete firewall name INBOUND rule 103",
#        "set firewall name INBOUND rule 104 action 'reject'",
#        "set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible'",
#        "set firewall name INBOUND rule 104",
#        "set firewall name INBOUND rule 104 ipsec 'match-none'"
#    ]
#
#    "after": [
#        {
#            "afi": "ipv6",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "This is ipv6 specific rule-set",
#                    "name": "UPLINK"
#                }
#            ]
#        },
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "INBOUND",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 101 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 101
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 104 is configured by Ansible",
#                            "ipsec": "match-none",
#                            "number": 104
#                        }
#                    ]
#                }
#            ]
#        }
#    ]
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall name INBOUND default-action 'accept'
# set firewall name INBOUND description 'IPv4 INBOUND rule set'
# set firewall name INBOUND rule 101 action 'accept'
# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'
# set firewall name INBOUND rule 101 ipsec 'match-ipsec'
# set firewall name INBOUND rule 104 action 'reject'
# set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible'
# set firewall name INBOUND rule 104 ipsec 'match-none'


# Using overridden
#
# Before state
# --------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall name INBOUND default-action 'accept'
# set firewall name INBOUND description 'IPv4 INBOUND rule set'
# set firewall name INBOUND rule 101 action 'accept'
# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'
# set firewall name INBOUND rule 101 ipsec 'match-ipsec'
# set firewall name INBOUND rule 104 action 'reject'
# set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible'
# set firewall name INBOUND rule 104 ipsec 'match-none'
#
- name: Overrides all device configuration with provided configuration
  vyos.vyos.vyos_firewall_rules:
    config:
    - afi: ipv4
      rule_sets:
      - name: Downlink
        description: IPv4 INBOUND rule set
        default_action: accept
        rules:
        - number: 501
          action: accept
          description: Rule 501 is configured by Ansible
          ipsec: match-ipsec
        - number: 502
          action: reject
          description: Rule 502 is configured by Ansible
          ipsec: match-ipsec
    state: overridden
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "before": [
#        {
#            "afi": "ipv6",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "This is ipv6 specific rule-set",
#                    "name": "UPLINK"
#                }
#            ]
#        },
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "INBOUND",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 101 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 101
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 104 is configured by Ansible",
#                            "ipsec": "match-none",
#                            "number": 104
#                        }
#                    ]
#                }
#            ]
#        }
#    ]
#
#    "commands": [
#        "delete firewall ipv6-name UPLINK",
#        "delete firewall name INBOUND",
#        "set firewall name Downlink default-action 'accept'",
#        "set firewall name Downlink description 'IPv4 INBOUND rule set'",
#        "set firewall name Downlink rule 501 action 'accept'",
#        "set firewall name Downlink rule 501",
#        "set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'",
#        "set firewall name Downlink rule 501 ipsec 'match-ipsec'",
#        "set firewall name Downlink rule 502 action 'reject'",
#        "set firewall name Downlink rule 502",
#        "set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'",
#        "set firewall name Downlink rule 502 ipsec 'match-ipsec'"
#
#
#    "after": [
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "Downlink",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 501 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 501
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 502 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 502
#                        }
#                    ]
#               }
#            ]
#        }
#    ]
#
#
# After state
# ------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall name Downlink default-action 'accept'
# set firewall name Downlink description 'IPv4 INBOUND rule set'
# set firewall name Downlink rule 501 action 'accept'
# set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'
# set firewall name Downlink rule 501 ipsec 'match-ipsec'
# set firewall name Downlink rule 502 action 'reject'
# set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'
# set firewall name Downlink rule 502 ipsec 'match-ipsec'


# Using gathered
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall ipv6-name UPLINK rule 1 action 'accept'
# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'
# set firewall ipv6-name UPLINK rule 2 action 'accept'
# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'
# set firewall name INBOUND default-action 'accept'
# set firewall name INBOUND description 'IPv4 INBOUND rule set'
# set firewall name INBOUND rule 101 action 'accept'
# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'
# set firewall name INBOUND rule 101 ipsec 'match-ipsec'
# set firewall name INBOUND rule 102 action 'reject'
# set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'
# set firewall name INBOUND rule 102 ipsec 'match-ipsec'
# set firewall name INBOUND rule 103 action 'accept'
# set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'
# set firewall name INBOUND rule 103 destination group address-group 'inbound'
# set firewall name INBOUND rule 103 source address '192.0.2.0'
# set firewall name INBOUND rule 103 state established 'enable'
# set firewall name INBOUND rule 103 state invalid 'disable'
# set firewall name INBOUND rule 103 state new 'disable'
# set firewall name INBOUND rule 103 state related 'enable'
#
- name: Gather listed firewall rules with provided configurations
  vyos.vyos.vyos_firewall_rules:
    config:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": [
#        {
#            "afi": "ipv6",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "This is ipv6 specific rule-set",
#                    "name": "UPLINK",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 1 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 1
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 2 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 2
#                        }
#                    ]
#                }
#            ]
#        },
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "INBOUND",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 101 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 101
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 102 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 102
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Rule 103 is configured by Ansible",
#                            "destination": {
#                                "group": {
#                                    "address_group": "inbound"
#                                }
#                            },
#                            "number": 103,
#                            "source": {
#                                "address": "192.0.2.0"
#                            },
#                            "state": {
#                                "established": true,
#                                "invalid": false,
#                                "new": false,
#                                "related": true
#                            }
#                        }
#                    ]
#                }
#            ]
#        }
#    ]
#
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall ipv6-name UPLINK rule 1 action 'accept'
# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'
# set firewall ipv6-name UPLINK rule 2 action 'accept'
# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'
# set firewall name INBOUND default-action 'accept'
# set firewall name INBOUND description 'IPv4 INBOUND rule set'
# set firewall name INBOUND rule 101 action 'accept'
# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'
# set firewall name INBOUND rule 101 ipsec 'match-ipsec'
# set firewall name INBOUND rule 102 action 'reject'
# set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'
# set firewall name INBOUND rule 102 ipsec 'match-ipsec'
# set firewall name INBOUND rule 103 action 'accept'
# set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'
# set firewall name INBOUND rule 103 destination group address-group 'inbound'
# set firewall name INBOUND rule 103 source address '192.0.2.0'
# set firewall name INBOUND rule 103 state established 'enable'
# set firewall name INBOUND rule 103 state invalid 'disable'
# set firewall name INBOUND rule 103 state new 'disable'
# set firewall name INBOUND rule 103 state related 'enable'


# Using rendered
#
#
- name: Render the commands for provided  configuration
  vyos.vyos.vyos_firewall_rules:
    config:
    - afi: ipv6
      rule_sets:
      - name: UPLINK
        description: This is ipv6 specific rule-set
        default_action: accept
    - afi: ipv4
      rule_sets:
      - name: INBOUND
        description: IPv4 INBOUND rule set
        default_action: accept
        rules:
        - number: 101
          action: accept
          description: Rule 101 is configured by Ansible
          ipsec: match-ipsec
        - number: 102
          action: reject
          description: Rule 102 is configured by Ansible
          ipsec: match-ipsec
        - number: 103
          action: accept
          description: Rule 103 is configured by Ansible
          destination:
            group:
              address_group: inbound
          source:
            address: 192.0.2.0
          state:
            established: true
            new: false
            invalid: false
            related: true
    state: rendered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
#        "set firewall ipv6-name UPLINK default-action 'accept'",
#        "set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'",
#        "set firewall name INBOUND default-action 'accept'",
#        "set firewall name INBOUND description 'IPv4 INBOUND rule set'",
#        "set firewall name INBOUND rule 101 action 'accept'",
#        "set firewall name INBOUND rule 101",
#        "set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'",
#        "set firewall name INBOUND rule 101 ipsec 'match-ipsec'",
#        "set firewall name INBOUND rule 102 action 'reject'",
#        "set firewall name INBOUND rule 102",
#        "set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'",
#        "set firewall name INBOUND rule 102 ipsec 'match-ipsec'",
#        "set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'",
#        "set firewall name INBOUND rule 103 destination group address-group inbound",
#        "set firewall name INBOUND rule 103",
#        "set firewall name INBOUND rule 103 source address 192.0.2.0",
#        "set firewall name INBOUND rule 103 state established enable",
#        "set firewall name INBOUND rule 103 state related enable",
#        "set firewall name INBOUND rule 103 state invalid disable",
#        "set firewall name INBOUND rule 103 state new disable",
#        "set firewall name INBOUND rule 103 action 'accept'"
#    ]


# Using parsed
#
#
- name: Parsed the provided input commands.
  vyos.vyos.vyos_firewall_rules:
    running_config:
      "set firewall group address-group 'inbound'
       set firewall name Downlink default-action 'accept'
       set firewall name Downlink description 'IPv4 INBOUND rule set'
       set firewall name Downlink rule 501 action 'accept'
       set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'
       set firewall name Downlink rule 501 ipsec 'match-ipsec'
       set firewall name Downlink rule 502 action 'reject'
       set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'
       set firewall name Downlink rule 502 ipsec 'match-ipsec'"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": [
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "Downlink",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 501 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 501
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 502 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 502
#                        }
#                    ]
#                }
#            ]
#        }
#    ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list / elements=string	when changed	The resulting configuration model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
before list / elements=string	always	The configuration prior to the model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device. Sample: ["set firewall name Downlink default-action 'accept'", "set firewall name Downlink description 'IPv4 INBOUND rule set'", "set firewall name Downlink rule 501 action 'accept'", "set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'", "set firewall name Downlink rule 502 ipsec 'match-ipsec'"]

Authors

Rohit Thakur (@rohitthakur2590)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/vyos/vyos/vyos_firewall_rules_module.html