netapp.elementsw.na_elementsw_network_interfaces – NetApp Element Software Configure Node Network Interfaces
netapp.elementsw.na_elementsw_network_interfaces – NetApp Element Software Configure Node Network Interfaces
Note
This plugin is part of the netapp.elementsw collection (version 20.11.0).
To install it use: ansible-galaxy collection install netapp.elementsw
.
To use it in a playbook, specify: netapp.elementsw.na_elementsw_network_interfaces
.
New in version 2.7.0: of netapp.elementsw
Synopsis
- Configure Element SW Node Network Interfaces for Bond 1G and 10G IP addresses.
- This module does not create interfaces, it expects the interfaces to already exists and can only modify them.
- This module cannot set or modify the method (Loopback, manual, dhcp, static).
- This module is not idempotent and does not support check_mode.
Requirements
The below requirements are needed on the host that executes this module.
- The modules were developed with SolidFire 10.1
- solidfire-sdk-python (1.1.0.92) or greater. Install using ‘pip install solidfire-sdk-python’
Parameters
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
bond_10g dictionary |
settings for the Bond10G interface. | ||
address string |
IP address for the interface. | ||
bond_lacp_rate string |
|
Link Aggregation Control Protocol - useful only if LACP is selected as the Bond Mode. Slow - Packets are transmitted at 30 second intervals. Fast - Packets are transmitted in 1 second intervals. | |
bond_mode string |
|
Bonding mode. | |
dns_nameservers list / elements=string |
List of addresses for domain name servers. | ||
dns_search list / elements=string |
List of DNS search domains. | ||
gateway string |
IP router network address to send packets out of the local network. | ||
mtu string |
The largest packet size (in bytes) that the interface can transmit.. Must be greater than or equal to 1500 bytes. | ||
netmask string |
subnet mask for the interface. | ||
virtual_network_tag string |
The virtual network identifier of the interface (VLAN tag). | ||
bond_1g dictionary |
settings for the Bond1G interface. | ||
address string |
IP address for the interface. | ||
bond_lacp_rate string |
|
Link Aggregation Control Protocol - useful only if LACP is selected as the Bond Mode. Slow - Packets are transmitted at 30 second intervals. Fast - Packets are transmitted in 1 second intervals. | |
bond_mode string |
|
Bonding mode. | |
dns_nameservers list / elements=string |
List of addresses for domain name servers. | ||
dns_search list / elements=string |
List of DNS search domains. | ||
gateway string |
IP router network address to send packets out of the local network. | ||
mtu string |
The largest packet size (in bytes) that the interface can transmit.. Must be greater than or equal to 1500 bytes. | ||
netmask string |
subnet mask for the interface. | ||
virtual_network_tag string |
The virtual network identifier of the interface (VLAN tag). | ||
bond_mode_10g string |
deprecated, use bond_10g option. | ||
bond_mode_1g string |
deprecated, use bond_1g option. | ||
dns_nameservers list / elements=string |
deprecated, use bond_1g and bond_10g options. | ||
dns_search_domains list / elements=string |
deprecated, use bond_1g and bond_10g options. | ||
gateway_address_10g string |
deprecated, use bond_10g option. | ||
gateway_address_1g string |
deprecated, use bond_1g option. | ||
hostname string / required |
The hostname or IP address of the SolidFire cluster. For na_elementsw_cluster, the Management IP (MIP) or hostname of the node to initiate the cluster creation from. | ||
ip_address_10g string |
deprecated, use bond_10g option. | ||
ip_address_1g string |
deprecated, use bond_1g option. | ||
lacp_10g string |
deprecated, use bond_10g option. | ||
lacp_1g string |
deprecated, use bond_1g option. | ||
method string |
deprecated, this option would trigger a 'updated failed' error | ||
mtu_10g string |
deprecated, use bond_10g option. | ||
mtu_1g string |
deprecated, use bond_1g option. | ||
password string / required |
Password for the specified user.
| ||
subnet_10g string |
deprecated, use bond_10g option. | ||
subnet_1g string |
deprecated, use bond_1g option. | ||
username string / required |
Please ensure that the user has the adequate permissions. For more information, please read the official documentation https://mysupport.netapp.com/documentation/docweb/index.html?productID=62636&language=en-US.
| ||
virtual_network_tag string |
deprecated, use bond_1g and bond_10g options. |
Notes
Note
- The modules prefixed with na\_elementsw are built to support the SolidFire storage platform.
Examples
- name: Set Node network interfaces configuration for Bond 1G and 10G properties
tags:
- elementsw_network_interfaces
na_elementsw_network_interfaces:
hostname: "{{ elementsw_hostname }}"
username: "{{ elementsw_username }}"
password: "{{ elementsw_password }}"
bond_1g:
address: 10.253.168.131
netmask: 255.255.248.0
gateway: 10.253.168.1
mtu: '1500'
bond_mode: ActivePassive
dns_nameservers: dns1,dns2
dns_search: domain1,domain2
bond_10g:
address: 10.253.1.202
netmask: 255.255.255.192
gateway: 10.253.1.193
mtu: '9000'
bond_mode: LACP
bond_lacp_rate: Fast
virtual_network_tag: vnet_tag
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
msg string |
success |
Success message
|
Authors
- NetApp Ansible Team (@carchi8py) <[email protected]>
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/netapp/elementsw/na_elementsw_network_interfaces_module.html