community.network.pn_vrouter_ospf – CLI command to add/remove vrouter-ospf
community.network.pn_vrouter_ospf – CLI command to add/remove vrouter-ospf
Note
This plugin is part of the community.network collection (version 1.3.0).
To install it use: ansible-galaxy collection install community.network
.
To use it in a playbook, specify: community.network.pn_vrouter_ospf
.
Synopsis
- This module can be used to add OSPF protocol to vRouter and remove OSPF protocol from a vRouter
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
pn_cliswitch string |
Target switch to run the CLI on. | |
pn_netmask string |
OSPF network IP address netmask. | |
pn_network string / required |
OSPF network IP address. | |
pn_ospf_area string |
stub area number for the configuration. | |
pn_vrouter_name string / required |
name of service config. | |
state string |
|
vrouter-ospf configuration command. |
Examples
- name: Add OSPF to vRouter
community.network.pn_vrouter_ospf:
state: 'present'
pn_vrouter_name: 'sw01-vrouter'
pn_network: '105.104.104.1'
pn_netmask: '24'
pn_ospf_area: '0'
- name: "Remove OSPF to vRouter"
community.network.pn_vrouter_ospf:
state: 'absent'
pn_vrouter_name: 'sw01-vrouter'
pn_network: '105.104.104.1'
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
changed boolean |
always |
indicates whether the CLI caused changes on the target.
|
command string |
always |
the CLI command run on the target node.
|
stderr list / elements=string |
on error |
set of error responses from the vrouter-ospf command.
|
stdout list / elements=string |
always |
set of responses from the vrouter-ospf command.
|
Authors
- Pluribus Networks (@rajaspachipulusu17)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/pn_vrouter_ospf_module.html