community.network.slxos_linkagg – Manage link aggregation groups on Extreme Networks SLX-OS network devices

From Get docs
Ansible/docs/2.10/collections/community/network/slxos linkagg module


community.network.slxos_linkagg – Manage link aggregation groups on Extreme Networks SLX-OS network devices

Note

This plugin is part of the community.network collection (version 1.3.0).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.slxos_linkagg.


Synopsis

  • This module provides declarative management of link aggregation groups on Extreme Networks SLX-OS network devices.

Parameters

Parameter Choices/Defaults Comments

aggregate

string

List of link aggregation definitions.

group

string

Channel-group number for the port-channel Link aggregation group. Range 1-1024.

members

string

List of members of the link aggregation group.

mode

string

  • active
  • on
  • passive

Mode of the link aggregation group.

purge

boolean

  • no

  • yes

Purge links not defined in the aggregate parameter.

state

string

  • present

  • absent

State of the link aggregation group.



Notes

Note

  • Tested against SLX-OS 17s.1.02


Examples

- name: Create link aggregation group
  community.network.slxos_linkagg:
    group: 10
    state: present

- name: Delete link aggregation group
  community.network.slxos_linkagg:
    group: 10
    state: absent

- name: Set link aggregation group to members
  community.network.slxos_linkagg:
    group: 200
    mode: active
    members:
      - Ethernet 0/1
      - Ethernet 0/2

- name: Remove link aggregation group from Ethernet 0/1
  community.network.slxos_linkagg:
    group: 200
    mode: active
    members:
      - Ethernet 0/1

- name: Create aggregate of linkagg definitions
  community.network.slxos_linkagg:
    aggregate:
      - { group: 3, mode: on, members: [Ethernet 0/1] }
      - { group: 100, mode: passive, members: [Ethernet 0/2] }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

commands

list / elements=string

always, except for the platforms that use Netconf transport to manage the device.

The list of configuration mode commands to send to the device


Sample:

['interface port-channel 30', 'interface Ethernet 0/3', 'channel-group 30 mode on', 'no interface port-channel 30']




Authors

  • Matthew Stone (@bigmstone)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/slxos_linkagg_module.html