community.network.ce_bfd_session – Manages BFD session configuration on HUAWEI CloudEngine devices.
community.network.ce_bfd_session – Manages BFD session configuration on HUAWEI CloudEngine devices.
Note
This plugin is part of the community.network collection (version 1.3.0).
To install it use: ansible-galaxy collection install community.network
.
To use it in a playbook, specify: community.network.ce_bfd_session
.
Synopsis
- Manages BFD session configuration, creates a BFD session or deletes a specified BFD session on HUAWEI CloudEngine devices.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
addr_type string |
|
Specifies the peer IP address type. |
create_type string |
|
BFD session creation mode, the currently created BFD session only supports static or static auto-negotiation mode. |
dest_addr string |
Specifies the peer IP address bound to the BFD session. | |
local_discr string |
The BFD session local identifier does not need to be configured when the mode is auto. | |
out_if_name string |
Specifies the type and number of the interface bound to the BFD session. | |
remote_discr string |
The BFD session remote identifier does not need to be configured when the mode is auto. | |
session_name string / required |
Specifies the name of a BFD session. The value is a string of 1 to 15 case-sensitive characters without spaces. | |
src_addr string |
Indicates the source IP address carried in BFD packets. | |
state string |
|
Determines whether the config should be present or not on the device. |
use_default_ip boolean |
|
Indicates the default multicast IP address that is bound to a BFD session. By default, BFD uses the multicast IP address 224.0.0.184. You can set the multicast IP address by running the default-ip-address command. The value is a bool type. |
vrf_name string |
Specifies the name of a Virtual Private Network (VPN) instance that is bound to a BFD session. The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. The value _public_ is reserved and cannot be used as the VPN instance name. |
Notes
Note
- This module requires the netconf system service be enabled on the remote device being managed.
- Recommended connection is
netconf
. - This module also works with
local
connections for legacy playbooks.
Examples
- name: Bfd session module test
hosts: cloudengine
connection: local
gather_facts: no
vars:
cli:
host: "{{ inventory_hostname }}"
port: "{{ ansible_ssh_port }}"
username: "{{ username }}"
password: "{{ password }}"
transport: cli
tasks:
- name: Configuring Single-hop BFD for Detecting Faults on a Layer 2 Link
community.network.ce_bfd_session:
session_name: bfd_l2link
use_default_ip: true
out_if_name: 10GE1/0/1
local_discr: 163
remote_discr: 163
provider: '{{ cli }}'
- name: Configuring Single-Hop BFD on a VLANIF Interface
community.network.ce_bfd_session:
session_name: bfd_vlanif
dest_addr: 10.1.1.6
out_if_name: Vlanif100
local_discr: 163
remote_discr: 163
provider: '{{ cli }}'
- name: Configuring Multi-Hop BFD
community.network.ce_bfd_session:
session_name: bfd_multi_hop
dest_addr: 10.1.1.1
local_discr: 163
remote_discr: 163
provider: '{{ cli }}'
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
changed boolean |
always |
check to see if a change was made on the device
Sample: True |
end_state dictionary |
always |
k/v pairs of configuration after module execution
Sample: {'session': {'addrType': 'IPV4', 'createType': 'SESS_STATIC', 'destAddr': None, 'outIfName': '10GE1/0/1', 'sessName': 'bfd_l2link', 'srcAddr': None, 'useDefaultIp': 'true', 'vrfName': None}} |
existing dictionary |
always |
k/v pairs of existing configuration
Sample: {'session': {}} |
proposed dictionary |
always |
k/v pairs of parameters passed into module
Sample: {'addr_type': None, 'create_type': None, 'dest_addr': None, 'out_if_name': '10GE1/0/1', 'session_name': 'bfd_l2link', 'src_addr': None, 'state': 'present', 'use_default_ip': True, 'vrf_name': None} |
updates list / elements=string |
always |
commands sent to the device
Sample: ['bfd bfd_l2link bind peer-ip default-ip interface 10ge1/0/1'] |
Authors
- QijunPan (@QijunPan)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/ce_bfd_session_module.html