cisco.iosxr.iosxr_interfaces – Interfaces resource module
cisco.iosxr.iosxr_interfaces – Interfaces resource module
Note
This plugin is part of the cisco.iosxr collection (version 1.2.0).
To install it use: ansible-galaxy collection install cisco.iosxr
.
To use it in a playbook, specify: cisco.iosxr.iosxr_interfaces
.
New in version 1.0.0: of cisco.iosxr
Synopsis
- This module manages the interface attributes on Cisco IOS-XR network devices.
Parameters
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
config list / elements=dictionary |
A dictionary of interface options | ||
description string |
Interface description. | ||
duplex string |
|
Configures the interface duplex mode. Default is auto-negotiation when not configured. | |
enabled boolean |
|
Administrative state of the interface. Set the value to | |
mtu integer |
Sets the MTU value for the interface. Applicable for Ethernet interfaces only. Refer to vendor documentation for valid values. | ||
name string / required |
Full name of the interface to configure in | ||
speed integer |
Configure the speed for an interface. Default is auto-negotiation when not configured. | ||
running_config string |
This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config interface. The state parsed reads the configuration from | ||
state string |
|
The state of the configuration after module completion |
Notes
Note
- Tested against Cisco IOS-XRv Version 6.1.3 on VIRL.
- This module works with connection
network_cli
. See the IOS-XR Platform Options.
Examples
# Using merged
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# description Replaced by Ansible Team
# mtu 2000
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# dot1q native vlan 1021
# !
- name: Configure Ethernet interfaces
cisco.iosxr.iosxr_interfaces:
config:
- name: GigabitEthernet0/0/0/2
description: Configured by Ansible
enabled: true
- name: GigabitEthernet0/0/0/3
description: Configured by Ansible Network
enabled: false
duplex: full
state: merged
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# description Configured and Merged by Ansible Network
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# description Configured and Merged by Ansible Network
# mtu 2600
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex full
# shutdown
# dot1q native vlan 1021
# !
# Using replaced
# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# description Configured by Ansible
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# description Test
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# dot1q native vlan 1021
# !
- name: Configure following interfaces and replace their existing config
cisco.iosxr.iosxr_interfaces:
config:
- name: GigabitEthernet0/0/0/2
description: Configured by Ansible
enabled: true
mtu: 2000
- name: GigabitEthernet0/0/0/3
description: Configured by Ansible Network
enabled: false
duplex: auto
state: replaced
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# description Configured by Ansible
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# description Configured and Replaced by Ansible
# mtu 2000
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# description Configured and Replaced by Ansible Network
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex half
# shutdown
# dot1q native vlan 1021
# !
# Using overridden
# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# description Configured by Ansible
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# description Configured by Ansible
# mtu 2600
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex full
# shutdown
# dot1q native vlan 1021
# !
- name: Override interfaces
cisco.iosxr.iosxr_interfaces:
config:
- name: GigabitEthernet0/0/0/2
description: Configured by Ansible
enabled: true
duplex: auto
- name: GigabitEthernet0/0/0/3
description: Configured by Ansible Network
enabled: false
speed: 1000
state: overridden
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# description Configured and Overridden by Ansible Network
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# speed 1000
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# description Configured and Overridden by Ansible Network
# mtu 2000
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex full
# shutdown
# dot1q native vlan 1021
# !
# Using deleted
# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# description Configured and Overridden by Ansible Network
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# speed 1000
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# description Configured and Overridden by Ansible Network
# mtu 2000
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex full
# shutdown
# dot1q native vlan 1021
# !
- name: Delete IOSXR interfaces as in given arguments
cisco.iosxr.iosxr_interfaces:
config:
- name: GigabitEthernet0/0/0/2
- name: GigabitEthernet0/0/0/3
state: deleted
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# dot1q native vlan 1021
# !
# Using parsed
# parsed.cfg
# ------------
#
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
# description Configured and Merged by Ansible-Network
# mtu 110
# ipv4 address 172.31.1.1 255.255.255.0
# duplex half
# !
# interface GigabitEthernet0/0/0/3
# shutdown
# !
# interface GigabitEthernet0/0/0/4
# shutdown
# !
# - name: Convert ACL interfaces config to argspec without connecting to the appliance
# cisco.iosxr.iosxr_interfaces:
# running_config: "{{ lookup('file', './parsed.cfg') }}"
# state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
# {
# "name": "MgmtEth0/RP0/CPU0/0"
# },
# {
# "access_groups": [
# {
# "acls": [
# {
# "direction": "in",
# "name": "acl_1"
# },
# {
# "direction": "out",
# "name": "acl_2"
# }
# ],
# "afi": "ipv4"
# },
# {
# "acls": [
# {
# "direction": "in",
# "name": "acl6_1"
# },
# {
# "direction": "out",
# "name": "acl6_2"
# }
# ],
# "afi": "ipv6"
# }
# ],
# "name": "GigabitEthernet0/0/0/0"
# },
# {
# "access_groups": [
# {
# "acls": [
# {
# "direction": "out",
# "name": "acl_1"
# }
# ],
# "afi": "ipv4"
# }
# ],
# "name": "GigabitEthernet0/0/0/1"
# }
# ]
# }
# Using rendered
- name: Render platform specific commands from task input using rendered state
cisco.iosxr.iosxr_interfaces:
config:
- name: GigabitEthernet0/0/0/0
description: Configured and Merged by Ansible-Network
mtu: 110
enabled: true
duplex: half
- name: GigabitEthernet0/0/0/1
description: Configured and Merged by Ansible-Network
mtu: 2800
enabled: false
speed: 100
duplex: full
state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": [
# "interface GigabitEthernet0/0/0/0",
# "description Configured and Merged by Ansible-Network",
# "mtu 110",
# "duplex half",
# "no shutdown",
# "interface GigabitEthernet0/0/0/1",
# "description Configured and Merged by Ansible-Network",
# "mtu 2800",
# "speed 100",
# "duplex full",
# "shutdown"
# ]
# Using gathered
# Before state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config interface
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
# description Configured and Merged by Ansible-Network
# mtu 110
# ipv4 address 172.31.1.1 255.255.255.0
# duplex half
# !
# interface GigabitEthernet0/0/0/3
# shutdown
# !
# interface GigabitEthernet0/0/0/4
# shutdown
# !
- name: Gather IOSXR interfaces as in given arguments
cisco.iosxr.iosxr_interfaces:
config:
state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
# {
# "description": "test for ansible",
# "enabled": false,
# "name": "Loopback888"
# },
# {
# "description": "Configured and Merged by Ansible-Network",
# "duplex": "half",
# "enabled": true,
# "mtu": 110,
# "name": "GigabitEthernet0/0/0/0"
# },
# {
# "enabled": false,
# "name": "GigabitEthernet0/0/0/3"
# },
# {
# "enabled": false,
# "name": "GigabitEthernet0/0/0/4"
# }
# ]
# After state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config interface
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
# description Configured and Merged by Ansible-Network
# mtu 110
# ipv4 address 172.31.1.1 255.255.255.0
# duplex half
# !
# interface GigabitEthernet0/0/0/3
# shutdown
# !
# interface GigabitEthernet0/0/0/4
# shutdown
# !
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
after list / elements=string |
when changed |
The configuration as structured data after module completion.
Sample: The configuration returned will always be in the same format of the parameters above. |
before list / elements=string |
always |
The configuration as structured data prior to module invocation.
Sample: The configuration returned will always be in the same format of the parameters above. |
commands list / elements=string |
always |
The set of commands pushed to the remote device
Sample: ['interface GigabitEthernet0/0/0/2', 'description: Configured by Ansible', 'shutdown'] |
Authors
- Sumit Jaiswal (@justjais)
- Rohit Thakur (@rohitthakur2590)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/iosxr/iosxr_interfaces_module.html