community.network.ce_static_route_bfd – Manages static route configuration on HUAWEI CloudEngine switches.

Note

This plugin is part of the community.network collection (version 1.3.0).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_static_route_bfd.

New in version 0.2.0: of community.network

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

Manages the static routes on HUAWEI CloudEngine switches.

Parameters

Parameter	Choices/Defaults	Comments
aftype string / required	v4 v6	Destination ip address family type of static route.
bfd_session_name string		bfd name (range 1-15).
commands list / elements=string		Incoming command line is used to send sys,undo ip route-static default-bfd,commit.
description string		Name of the route. Used with the name parameter on the CLI.
destvrf string		VPN instance of next hop ip address.
detect_multiplier integer		Configure the BFD multiplier (range 3-50).
function_flag string / required	globalBFD singleBFD dynamicBFD staticBFD	Used to distinguish between command line functions.
mask string		Destination ip mask of static route.
min_rx_interval integer		Set the minimum BFD receive interval (range 50-1000).
min_tx_interval integer		Set the minimum BFD session sending interval (range 50-1000).
next_hop string		Next hop address of static route.
nhp_interface string		Next hop interface full name of static route.
pref integer		Preference or administrative difference of route (range 1-255).
prefix string / required		Destination ip address of static route.
state string	present ← absent	Specify desired state of the resource.
tag integer		Route tag value (numeric).
vrf string		VPN instance of destination ip address.

Notes

Note

This module requires the netconf system service be enabled on the remote device being managed.
Recommended connection is netconf.
This module also works with local connections for legacy playbooks.
If no vrf is supplied, vrf is set to default.
If state=absent, the route configuration will be removed, regardless of the non-required parameters.

Examples

#ip route-static bfd interface-type interface-number nexthop-address [ local-address address ]
#[ min-rx-interval min-rx-interval | min-tx-interval min-tx-interval | detect-multiplier multiplier ]
- name: Config an ip route-static bfd 10GE1/0/1 3.3.3.3 min-rx-interval 50 min-tx-interval 50 detect-multiplier 5
  community.network.ce_static_route_bfd:
    function_flag: 'singleBFD'
    nhp_interface: 10GE1/0/1
    next_hop: 3.3.3.3
    min_tx_interval: 50
    min_rx_interval: 50
    detect_multiplier: 5
    aftype: v4
    state: present

#undo ip route-static bfd [ interface-type interface-number | vpn-instance vpn-instance-name ] nexthop-address
- name: Undo ip route-static bfd 10GE1/0/1 3.3.3.4
  community.network.ce_static_route_bfd:
    function_flag: 'singleBFD'
    nhp_interface: 10GE1/0/1
    next_hop: 3.3.3.4
    aftype: v4
    state: absent

#ip route-static default-bfd { min-rx-interval {min-rx-interval} | min-tx-interval {min-tx-interval} | detect-multiplier {multiplier}}
- name: Config an ip route-static default-bfd min-rx-interval 50 min-tx-interval 50 detect-multiplier 6
  community.network.ce_static_route_bfd:
    function_flag: 'globalBFD'
    min_tx_interval: 50
    min_rx_interval: 50
    detect_multiplier: 6
    aftype: v4
    state: present

- name: Undo ip route-static default-bfd
  community.network.ce_static_route_bfd:
    function_flag: 'globalBFD'
    aftype: v4
    state: absent
    commands: 'sys,undo ip route-static default-bfd,commit'

- name: Config an ipv4 static route 2.2.2.0/24 2.2.2.1 preference 1 tag 2 description test for staticBFD
  community.network.ce_static_route_bfd:
    function_flag: 'staticBFD'
    prefix: 2.2.2.2
    mask: 24
    next_hop: 2.2.2.1
    tag: 2
    description: test
    pref: 1
    aftype: v4
    bfd_session_name: btoa
    state: present

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device Sample: True
end_state dictionary	always	k/v pairs of switchport after module execution Sample: {'bfd_session_name': 'btoa', 'description': 'testing', 'function_flag': 'staticBFD', 'mask': '24', 'next_hop': '3.3.3.3', 'pref': '100', 'prefix': '192.168.20.0', 'tag': 'null'}
existing dictionary	always	k/v pairs of existing switchport Sample: {'bfd_session_name': 'btoa', 'description': 'testing', 'function_flag': , 'mask': '24', 'next_hop': , 'pref': '101', 'prefix': '192.168.20.0', 'tag': 'null'}
proposed dictionary	always	k/v pairs of parameters passed into module Sample: {'bfd_session_name': 'btoa', 'description': 'testing', 'function_flag': 'staticBFD', 'mask': '24', 'next_hop': '3.3.3.3', 'pref': '100', 'prefix': '192.168.20.642', 'vrf': '_public_'}
updates list / elements=string	always	command list sent to the device Sample: ['ip route-static 192.168.20.0 255.255.255.0 3.3.3.3 preference 100 description testing']

Authors

xuxiaowei0512 (@CloudEngine-Ansible)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/ce_static_route_bfd_module.html