community.network.pn_vrouter_packet_relay – CLI command to add/remove vrouter-packet-relay
community.network.pn_vrouter_packet_relay – CLI command to add/remove vrouter-packet-relay
Note
This plugin is part of the community.network collection (version 1.3.0).
To install it use: ansible-galaxy collection install community.network
.
To use it in a playbook, specify: community.network.pn_vrouter_packet_relay
.
Synopsis
- This module can be used to add packet relay configuration for DHCP on vrouter and remove packet relay configuration for DHCP on vrouter.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
pn_cliswitch string |
Target switch to run the CLI on. | |
pn_forward_ip string / required |
forwarding IP address. | |
pn_forward_proto string |
|
protocol type to forward packets. |
pn_nic string / required |
NIC. | |
pn_vrouter_name string / required |
name of service config. | |
state string |
|
vrouter-packet-relay configuration command. |
Examples
- name: VRouter packet relay add
community.network.pn_vrouter_packet_relay:
pn_cliswitch: "sw01"
pn_forward_ip: "192.168.10.1"
pn_nic: "eth0.4092"
pn_vrouter_name: "sw01-vrouter"
- name: VRouter packet relay remove
community.network.pn_vrouter_packet_relay:
pn_cliswitch: "sw01"
state: "absent"
pn_forward_ip: "192.168.10.1"
pn_nic: "eth0.4092"
pn_vrouter_name: "sw01-vrouter"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
changed boolean |
always |
indicates whether the CLI caused changes on the target.
|
command string |
always |
the CLI command run on the target node.
|
stderr list / elements=string |
on error |
set of error responses from the vrouter-packet-relay command.
|
stdout list / elements=string |
always |
set of responses from the vrouter-packet-relay command.
|
Authors
- Pluribus Networks (@rajaspachipulusu17)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/pn_vrouter_packet_relay_module.html