mellanox.onyx.onyx_mlag_ipl – Manage IPL (inter-peer link) on Mellanox ONYX network devices
mellanox.onyx.onyx_mlag_ipl – Manage IPL (inter-peer link) on Mellanox ONYX network devices
Note
This plugin is part of the mellanox.onyx collection (version 1.0.0).
To install it use: ansible-galaxy collection install mellanox.onyx
.
To use it in a playbook, specify: mellanox.onyx.onyx_mlag_ipl
.
Synopsis
- This module provides declarative management of IPL (inter-peer link) management on Mellanox ONYX network devices.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
name string / required |
Name of the interface (port-channel) IPL should be configured on. | |
peer_address string |
IPL peer IP address. | |
state string |
|
IPL state. |
vlan_interface string |
Name of the IPL vlan interface. |
Notes
Note
- Tested on ONYX 3.6.4000
Examples
- name: Run configure ipl
onyx_mlag_ipl:
name: Po1
vlan_interface: Vlan 322
state: present
peer_address: 192.168.7.1
- name: Run remove ipl
onyx_mlag_ipl:
name: Po1
state: absent
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
commands list / elements=string |
always |
The list of configuration mode commands to send to the device.
Sample: ['interface port-channel 1 ipl 1', 'interface vlan 1024 ipl 1 peer-address 10.10.10.10'] |
Authors
- Samer Deeb (@samerd)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/mellanox/onyx/onyx_mlag_ipl_module.html