cisco.nxos.nxos_acl – (deprecated, removed after 2022-06-01) Manages access list entries for ACLs.

Note

This plugin is part of the cisco.nxos collection (version 1.3.1).

To install it use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_acl.

New in version 1.0.0: of cisco.nxos

DEPRECATED
Synopsis
Parameters
Notes
Examples
Return Values
Status

DEPRECATED

Removed in: major release after 2022-06-01
Why: Updated modules released with more functionality
Alternative: nxos_acls

Synopsis

Manages access list entries for ACLs.

Note

This module has a corresponding action plugin.

Parameters

Parameter		Choices/Defaults	Comments
ack string		enable	Match on the ACK bit.
action string		permit deny remark	Action of the ACE.
dest string			Destination ip and mask using IP/MASK notation and supports the keyword 'any'.
dest_port1 string			Port/protocol and also first (lower) port when using range operand.
dest_port2 string			Second (end) port when using range operand.
dest_port_op string		any eq gt lt neq range	Destination port operands such as eq, neq, gt, lt, range.
dscp string		af11 af12 af13 af21 af22 af23 af31 af32 af33 af41 af42 af43 cs1 cs2 cs3 cs4 cs5 cs6 cs7 default ef	Match packets with given dscp value.
established string		enable	Match established connections.
fin string		enable	Match on the FIN bit.
fragments string		enable	Check non-initial fragments.
log string		enable	Log matches against this entry.
name string / required			Case sensitive name of the access list (ACL).
precedence string		critical flash flash-override immediate internet network priority routine	Match packets with given precedence.
proto string			Port number or protocol (as supported by the switch).
provider dictionary			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. Starting with Ansible 2.6 we recommend using `connection: httpapi` for NX-API. This option will be removed in a release after 2022-06-01. For more information please see the NXOS Platform Options guide. A dict object containing connection details.
	auth_pass string		Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
	authorize boolean	no ← yes	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead.
	host string		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	port integer		Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
	ssh_keyfile string		Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
	transport string	cli ← nxapi	Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
	use_proxy boolean	no yes ←	If `no`, the environment variables `http_proxy` and `https_proxy` will be ignored.
	use_ssl boolean	no ← yes	Configures the transport to use SSL if set to `yes` only when the `transport=nxapi`, otherwise this value is ignored.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
	validate_certs boolean	no ← yes	If `no`, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
psh string		enable	Match on the PSH bit.
remark string			If action is set to remark, this is the description.
rst string		enable	Match on the RST bit.
seq string			Sequence number of the entry (ACE).
src string			Source ip and mask using IP/MASK notation and supports keyword 'any'.
src_port1 string			Port/protocol and also first (lower) port when using range operand.
src_port2 string			Second (end) port when using range operand.
src_port_op string		any eq gt lt neq range	Source port operands such as eq, neq, gt, lt, range.
state string		present ← absent delete_acl	Specify desired state of the resource.
syn string		enable	Match on the SYN bit.
time_range string			Name of time-range to apply.
urg string		enable	Match on the URG bit.

Notes

Note

Tested against NXOSv 7.3.(0)D1(1) on VIRL
state=absent removes the ACE if it exists.
state=delete_acl deletes the ACL if it exists.
For idempotency, use port numbers for the src/dest port params like src_port1 and names for the well defined protocols for the proto param.
Although this module is idempotent in that if the ace as presented in the task is identical to the one on the switch, no changes will be made. If there is any difference, what is in Ansible will be pushed (configured options will be overridden). This is to improve security, but at the same time remember an ACE is removed, then re-added, so if there is a change, the new ACE will be exactly what parameters you are sending to the module.
For information on using CLI and NX-API see the NXOS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples

# configure ACL ANSIBLE
- cisco.nxos.nxos_acl:
    name: ANSIBLE
    seq: 10
    action: permit
    proto: tcp
    src: 192.0.2.1/24
    dest: any
    state: present

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list / elements=string	always	commands sent to the device Sample: ['ip access-list ANSIBLE', '10 permit tcp 192.0.2.1/24 any']

Status

This module will be removed in a major release after 2022-06-01. [deprecated]
For more information see DEPRECATED.

Authors

Jason Edelman (@jedelman8)
Gabriele Gerbino (@GGabriele)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/nxos/nxos_acl_module.html