community.network.cnos_l2_interface – Manage Layer-2 interface on Lenovo CNOS devices.

Note

This plugin is part of the community.network collection (version 1.3.0).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.cnos_l2_interface.

Synopsis
Parameters
Examples
Return Values

Synopsis

This module provides declarative management of Layer-2 interfaces on Lenovo CNOS devices.

Parameters

Parameter		Choices/Defaults	Comments
access_vlan string			Configure given VLAN in access port. If `mode=access`, used as the access VLAN ID.
aggregate string			List of Layer-2 interface definitions.
mode string		access ← trunk	Mode in which interface needs to be configured.
name string / required			Full name of the interface excluding any logical unit number, i.e. Ethernet1/3. aliases: interface
native_vlan string			Native VLAN to be configured in trunk port. If `mode=trunk`, used as the trunk native VLAN ID.
provider string			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. For more information please see the CNOS Platform Options guide. A dict object containing connection details.
	auth_pass string		Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
	authorize boolean	no ← yes	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead.
	host string / required		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	port string	Default: 22	Specifies the port to use when building the connection to the remote device.
	ssh_keyfile string		Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE`will be used instead.
	timeout string	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
state string		present ← absent unconfigured	Manage the state of the Layer-2 Interface configuration.
trunk_allowed_vlans string			List of allowed VLANs in a given trunk port. If `mode=trunk`, these are the only VLANs that will be configured on the trunk, i.e. "2-10,15".
trunk_vlans string			List of VLANs to be configured in trunk port. If `mode=trunk`, used as the VLAN range to ADD or REMOVE from the trunk.

Examples

- name: Ensure Ethernet1/5 is in its default l2 interface state
  community.network.cnos_l2_interface:
    name: Ethernet1/5
    state: unconfigured

- name: Ensure Ethernet1/5 is configured for access vlan 20
  community.network.cnos_l2_interface:
    name: Ethernet1/5
    mode: access
    access_vlan: 20

- name: Ensure Ethernet1/5 only has vlans 5-10 as trunk vlans
  community.network.cnos_l2_interface:
    name: Ethernet1/5
    mode: trunk
    native_vlan: 10
    trunk_vlans: 5-10

- name: Ensure Ethernet1/5 is a trunk port and ensure 2-50 are being tagged
        (doesn't mean others aren't also being tagged)
  community.network.cnos_l2_interface:
    name: Ethernet1/5
    mode: trunk
    native_vlan: 10
    trunk_vlans: 2-50

- name: Ensure these VLANs are not being tagged on the trunk
  community.network.cnos_l2_interface:
    name: Ethernet1/5
    mode: trunk
    trunk_vlans: 51-4094
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list / elements=string	always, except for the platforms that use Netconf transport to manage the device.	The list of configuration mode commands to send to the device Sample: ['interface Ethernet1/5', 'switchport access vlan 20']

Authors

Anil Kumar Muraleedharan (@amuraleedhar)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/cnos_l2_interface_module.html