vyos.vyos.vyos_linkagg – (deprecated, removed after 2022-06-01) Manage link aggregation groups on VyOS network devices

Note

This plugin is part of the vyos.vyos collection (version 1.1.0).

To install it use: ansible-galaxy collection install vyos.vyos.

To use it in a playbook, specify: vyos.vyos.vyos_linkagg.

New in version 1.0.0: of vyos.vyos

DEPRECATED
Synopsis
Parameters
Notes
Examples
Return Values
Status

DEPRECATED

Removed in: major release after 2022-06-01
Why: Updated modules released with more functionality.
Alternative: vyos_lag_interfaces

Synopsis

This module provides declarative management of link aggregation groups on VyOS network devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter		Choices/Defaults	Comments
aggregate list / elements=dictionary			List of link aggregation definitions.
	members list / elements=string		List of members of the link aggregation group.
	mode string	802.3ad active-backup broadcast round-robin transmit-load-balance adaptive-load-balance xor-hash on	Mode of the link aggregation group.
	name string / required		Name of the link aggregation group.
	state string	present absent up down	State of the link aggregation group.
members list / elements=string			List of members of the link aggregation group.
mode string		802.3ad ← active-backup broadcast round-robin transmit-load-balance adaptive-load-balance xor-hash on	Mode of the link aggregation group.
name string			Name of the link aggregation group.
provider dictionary			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. For more information please see the Network Guide. A dict object containing connection details.
	host string		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	port integer		Specifies the port to use when building the connection to the remote device.
	ssh_keyfile path		Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
state string		present ← absent up down	State of the link aggregation group.

Notes

Note

Tested against VYOS 1.1.7
For more information on using Ansible to manage network devices see the Ansible Network Guide

Examples

- name: configure link aggregation group
  vyos.vyos.vyos_linkagg:
    name: bond0
    members:
    - eth0
    - eth1

- name: remove configuration
  vyos.vyos.vyos_linkagg:
    name: bond0
    state: absent

- name: Create aggregate of linkagg definitions
  vyos.vyos.vyos_linkagg:
    aggregate:
    - {name: bond0, members: [eth1]}
    - {name: bond1, members: [eth2]}

- name: Remove aggregate of linkagg definitions
  vyos.vyos.vyos_linkagg:
    aggregate:
    - name: bond0
    - name: bond1
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list / elements=string	always, except for the platforms that use Netconf transport to manage the device.	The list of configuration mode commands to send to the device Sample: ['set interfaces bonding bond0', "set interfaces ethernet eth0 bond-group 'bond0'", "set interfaces ethernet eth1 bond-group 'bond0'"]

Status

This module will be removed in a major release after 2022-06-01. [deprecated]
For more information see DEPRECATED.

Authors

Ricardo Carrillo Cruz (@rcarrillocruz)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/vyos/vyos/vyos_linkagg_module.html