vyos.vyos.vyos_lldp_interfaces – LLDP interfaces resource module
vyos.vyos.vyos_lldp_interfaces – LLDP interfaces resource module
Note
This plugin is part of the vyos.vyos collection (version 1.1.1).
To install it use: ansible-galaxy collection install vyos.vyos
.
To use it in a playbook, specify: vyos.vyos.vyos_lldp_interfaces
.
New in version 1.0.0: of vyos.vyos
Synopsis
- This module manages attributes of lldp interfaces on VyOS network devices.
Parameters
Parameter | Choices/Defaults | Comments | ||||
---|---|---|---|---|---|---|
config list / elements=dictionary |
A list of lldp interfaces configurations. | |||||
enable boolean |
|
to disable lldp on the interface. | ||||
location dictionary |
LLDP-MED location data. | |||||
civic_based dictionary |
Civic-based location data. | |||||
ca_info list / elements=dictionary |
LLDP-MED address info | |||||
ca_type integer |
LLDP-MED Civic Address type. | |||||
ca_value string |
LLDP-MED Civic Address value. | |||||
country_code string / required |
Country Code | |||||
coordinate_based dictionary |
Coordinate-based location. | |||||
altitude integer |
Altitude in meters. | |||||
datum string |
|
Coordinate datum type. | ||||
latitude string / required |
Latitude. | |||||
longitude string / required |
Longitude. | |||||
elin string |
Emergency Call Service ELIN number (between 10-25 numbers). | |||||
name string / required |
Name of the lldp interface. | |||||
running_config string |
This option is used only with state parsed. The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep lldp. The state parsed reads the configuration from | |||||
state string |
|
The state of the configuration after module completion. |
Notes
Note
- Tested against VyOS 1.1.8 (helium).
- This module works with connection
network_cli
. See the VyOS OS Platform Options.
Examples
# Using merged
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
#
- name: Merge provided configuration with device configuration
vyos.vyos.vyos_lldp_interfaces:
config:
- name: eth1
location:
civic_based:
country_code: US
ca_info:
- ca_type: 0
ca_value: ENGLISH
- name: eth2
location:
coordinate_based:
altitude: 2200
datum: WGS84
longitude: 222.267255W
latitude: 33.524449N
state: merged
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# before": []
#
# "commands": [
# "set service lldp interface eth1 location civic-based country-code 'US'",
# "set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'",
# "set service lldp interface eth1",
# "set service lldp interface eth2 location coordinate-based latitude '33.524449N'",
# "set service lldp interface eth2 location coordinate-based altitude '2200'",
# "set service lldp interface eth2 location coordinate-based datum 'WGS84'",
# "set service lldp interface eth2 location coordinate-based longitude '222.267255W'",
# "set service lldp interface eth2 location coordinate-based latitude '33.524449N'",
# "set service lldp interface eth2 location coordinate-based altitude '2200'",
# "set service lldp interface eth2 location coordinate-based datum 'WGS84'",
# "set service lldp interface eth2 location coordinate-based longitude '222.267255W'",
# "set service lldp interface eth2"
#
# "after": [
# {
# "location": {
# "coordinate_based": {
# "altitude": 2200,
# "datum": "WGS84",
# "latitude": "33.524449N",
# "longitude": "222.267255W"
# }
# },
# "name": "eth2"
# },
# {
# "location": {
# "civic_based": {
# "ca_info": [
# {
# "ca_type": 0,
# "ca_value": "ENGLISH"
# }
# ],
# "country_code": "US"
# }
# },
# "name": "eth1"
# }
# ],
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'
# Using replaced
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'
#
- name: Replace device configurations of listed LLDP interfaces with provided configurations
vyos.vyos.vyos_lldp_interfaces:
config:
- name: eth2
location:
civic_based:
country_code: US
ca_info:
- ca_type: 0
ca_value: ENGLISH
- name: eth1
location:
coordinate_based:
altitude: 2200
datum: WGS84
longitude: 222.267255W
latitude: 33.524449N
state: replaced
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "before": [
# {
# "location": {
# "coordinate_based": {
# "altitude": 2200,
# "datum": "WGS84",
# "latitude": "33.524449N",
# "longitude": "222.267255W"
# }
# },
# "name": "eth2"
# },
# {
# "location": {
# "civic_based": {
# "ca_info": [
# {
# "ca_type": 0,
# "ca_value": "ENGLISH"
# }
# ],
# "country_code": "US"
# }
# },
# "name": "eth1"
# }
# ]
#
# "commands": [
# "delete service lldp interface eth2 location",
# "set service lldp interface eth2 'disable'",
# "set service lldp interface eth2 location civic-based country-code 'US'",
# "set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'",
# "delete service lldp interface eth1 location",
# "set service lldp interface eth1 'disable'",
# "set service lldp interface eth1 location coordinate-based latitude '33.524449N'",
# "set service lldp interface eth1 location coordinate-based altitude '2200'",
# "set service lldp interface eth1 location coordinate-based datum 'WGS84'",
# "set service lldp interface eth1 location coordinate-based longitude '222.267255W'"
# ]
#
# "after": [
# {
# "location": {
# "civic_based": {
# "ca_info": [
# {
# "ca_type": 0,
# "ca_value": "ENGLISH"
# }
# ],
# "country_code": "US"
# }
# },
# "name": "eth2"
# },
# {
# "location": {
# "coordinate_based": {
# "altitude": 2200,
# "datum": "WGS84",
# "latitude": "33.524449N",
# "longitude": "222.267255W"
# }
# },
# "name": "eth1"
# }
# ]
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 'disable'
# set service lldp interface eth1 location coordinate-based altitude '2200'
# set service lldp interface eth1 location coordinate-based datum 'WGS84'
# set service lldp interface eth1 location coordinate-based latitude '33.524449N'
# set service lldp interface eth1 location coordinate-based longitude '222.267255W'
# set service lldp interface eth2 'disable'
# set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth2 location civic-based country-code 'US'
# Using overridden
#
# Before state
# --------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 'disable'
# set service lldp interface eth1 location coordinate-based altitude '2200'
# set service lldp interface eth1 location coordinate-based datum 'WGS84'
# set service lldp interface eth1 location coordinate-based latitude '33.524449N'
# set service lldp interface eth1 location coordinate-based longitude '222.267255W'
# set service lldp interface eth2 'disable'
# set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth2 location civic-based country-code 'US'
#
- name: Overrides all device configuration with provided configuration
vyos.vyos.vyos_lldp_interfaces:
config:
- name: eth2
location:
elin: 0000000911
state: overridden
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "before": [
# {
# "enable": false,
# "location": {
# "civic_based": {
# "ca_info": [
# {
# "ca_type": 0,
# "ca_value": "ENGLISH"
# }
# ],
# "country_code": "US"
# }
# },
# "name": "eth2"
# },
# {
# "enable": false,
# "location": {
# "coordinate_based": {
# "altitude": 2200,
# "datum": "WGS84",
# "latitude": "33.524449N",
# "longitude": "222.267255W"
# }
# },
# "name": "eth1"
# }
# ]
#
# "commands": [
# "delete service lldp interface eth2 location",
# "delete service lldp interface eth2 disable",
# "set service lldp interface eth2 location elin 0000000911"
#
#
# "after": [
# {
# "location": {
# "elin": 0000000911
# },
# "name": "eth2"
# }
# ]
#
#
# After state
# ------------
#
# vyos@vyos# run show configuration commands | grep lldp
# set service lldp interface eth2 location elin '0000000911'
# Using deleted
#
# Before state
# -------------
#
# vyos@vyos# run show configuration commands | grep lldp
# set service lldp interface eth2 location elin '0000000911'
#
- name: Delete lldp interface attributes of given interfaces.
vyos.vyos.vyos_lldp_interfaces:
config:
- name: eth2
state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
before: [{location: {elin: 0000000911}, name: eth2}]
# "commands": [
# "commands": [
# "delete service lldp interface eth2"
# ]
#
# "after": []
# After state
# ------------
# vyos@vyos# run show configuration commands | grep lldp
# set service 'lldp'
# Using gathered
#
# Before state:
# -------------
#
# vyos@192# run show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'
#
- name: Gather listed lldp interfaces from running configuration
vyos.vyos.vyos_lldp_interfaces:
config:
state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "gathered": [
# {
# "location": {
# "coordinate_based": {
# "altitude": 2200,
# "datum": "WGS84",
# "latitude": "33.524449N",
# "longitude": "222.267255W"
# }
# },
# "name": "eth2"
# },
# {
# "location": {
# "civic_based": {
# "ca_info": [
# {
# "ca_type": 0,
# "ca_value": "ENGLISH"
# }
# ],
# "country_code": "US"
# }
# },
# "name": "eth1"
# }
# ]
#
#
# After state:
# -------------
#
# vyos@192# run show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'
# Using rendered
#
#
- name: Render the commands for provided configuration
vyos.vyos.vyos_lldp_interfaces:
config:
- name: eth1
location:
civic_based:
country_code: US
ca_info:
- ca_type: 0
ca_value: ENGLISH
- name: eth2
location:
coordinate_based:
altitude: 2200
datum: WGS84
longitude: 222.267255W
latitude: 33.524449N
state: rendered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
# "set service lldp interface eth1 location civic-based country-code 'US'",
# "set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'",
# "set service lldp interface eth1",
# "set service lldp interface eth2 location coordinate-based latitude '33.524449N'",
# "set service lldp interface eth2 location coordinate-based altitude '2200'",
# "set service lldp interface eth2 location coordinate-based datum 'WGS84'",
# "set service lldp interface eth2 location coordinate-based longitude '222.267255W'",
# "set service lldp interface eth2"
# ]
# Using parsed
#
#
- name: Parsed the commands to provide structured configuration.
vyos.vyos.vyos_lldp_interfaces:
running_config:
"set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
set service lldp interface eth1 location civic-based country-code 'US'
set service lldp interface eth2 location coordinate-based altitude '2200'
set service lldp interface eth2 location coordinate-based datum 'WGS84'
set service lldp interface eth2 location coordinate-based latitude '33.524449N'
set service lldp interface eth2 location coordinate-based longitude '222.267255W'"
state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": [
# {
# "location": {
# "coordinate_based": {
# "altitude": 2200,
# "datum": "WGS84",
# "latitude": "33.524449N",
# "longitude": "222.267255W"
# }
# },
# "name": "eth2"
# },
# {
# "location": {
# "civic_based": {
# "ca_info": [
# {
# "ca_type": 0,
# "ca_value": "ENGLISH"
# }
# ],
# "country_code": "US"
# }
# },
# "name": "eth1"
# }
# ]
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
after list / elements=string |
when changed |
The configuration as structured data after module completion.
Sample: The configuration returned will always be in the same format of the parameters above. |
before list / elements=string |
always |
The configuration as structured data prior to module invocation.
Sample: The configuration returned will always be in the same format of the parameters above. |
commands list / elements=string |
always |
The set of commands pushed to the remote device.
Sample: ["set service lldp interface eth2 'disable'", 'delete service lldp interface eth1 location'] |
Authors
- Rohit Thakur (@rohitthakur2590)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/vyos/vyos/vyos_lldp_interfaces_module.html