community.network.cnos_linkagg – Manage link aggregation groups on Lenovo CNOS devices

Note

This plugin is part of the community.network collection (version 2.0.1).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.cnos_linkagg.

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

This module provides declarative management of link aggregation groups on Lenovo CNOS network devices.

Parameters

Parameter		Choices/Defaults	Comments
aggregate string			List of link aggregation definitions.
group string			Channel-group number for the port-channel Link aggregation group. Range 1-255.
members string			List of members of the link aggregation group.
mode string		active on passive	Mode of the link aggregation group.
provider string			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. For more information please see the CNOS Platform Options guide. A dict object containing connection details.
	auth_pass string		Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
	authorize boolean	no ← yes	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead.
	host string / required		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	port string	Default: 22	Specifies the port to use when building the connection to the remote device.
	ssh_keyfile string		Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
	timeout string	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
purge boolean		no ← yes	Purge links not defined in the aggregate parameter.
state string		present ← absent	State of the link aggregation group.

Notes

Note

Tested against CNOS 10.8.1

Examples

- name: Create link aggregation group
  community.network.cnos_linkagg:
    group: 10
    state: present

- name: Delete link aggregation group
  community.network.cnos_linkagg:
    group: 10
    state: absent

- name: Set link aggregation group to members
  community.network.cnos_linkagg:
    group: 200
    mode: active
    members:
      - Ethernet1/33
      - Ethernet1/44

- name: Remove link aggregation group from GigabitEthernet0/0
  community.network.cnos_linkagg:
    group: 200
    mode: active
    members:
      - Ethernet1/33

- name: Create aggregate of linkagg definitions
  community.network.cnos_linkagg:
    aggregate:
      - { group: 3, mode: on, members: [Ethernet1/33] }
      - { group: 100, mode: passive, members: [Ethernet1/44] }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list / elements=string	always, except for the platforms that use Netconf transport to manage the device.	The list of configuration mode commands to send to the device Sample: ['interface port-channel 30', 'interface Ethernet1/33', 'channel-group 30 mode on', 'no interface port-channel 30']

Authors

Anil Kumar Muraleedharan (@auraleedhar)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/community/network/cnos_linkagg_module.html