fortinet.fortios.fortios_system_modem – Configure MODEM in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 1.1.8).

To install it use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_system_modem.

New in version 2.10: of fortinet.fortios

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis

This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and modem category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

ansible>=2.9.0

Parameters

Parameter		Choices/Defaults	Comments
access_token string			Token-based authentication. Generated from GUI of Fortigate.
system_modem dictionary			Configure MODEM.
	action string	dial stop none	Dial up/stop MODEM.
	altmode string	enable disable	Enable/disable altmode for installations using PPP in China.
	authtype1 string	pap chap mschap mschapv2	Allowed authentication types for ISP 1.
	authtype2 string	pap chap mschap mschapv2	Allowed authentication types for ISP 2.
	authtype3 string	pap chap mschap mschapv2	Allowed authentication types for ISP 3.
	auto_dial string	enable disable	Enable/disable auto-dial after a reboot or disconnection.
	connect_timeout integer		Connection completion timeout (30 - 255 sec).
	dial_cmd1 string		Dial command (this is often an ATD or ATDT command).
	dial_cmd2 string		Dial command (this is often an ATD or ATDT command).
	dial_cmd3 string		Dial command (this is often an ATD or ATDT command).
	dial_on_demand string	enable disable	Enable/disable to dial the modem when packets are routed to the modem interface.
	distance integer		Distance of learned routes (1 - 255).
	dont_send_CR1 string	enable disable	Do not send CR when connected (ISP1).
	dont_send_CR2 string	enable disable	Do not send CR when connected (ISP2).
	dont_send_CR3 string	enable disable	Do not send CR when connected (ISP3).
	extra_init1 string		Extra initialization string to ISP 1.
	extra_init2 string		Extra initialization string to ISP 2.
	extra_init3 string		Extra initialization string to ISP 3.
	holddown_timer integer		Hold down timer in seconds (1 - 60 sec).
	idle_timer integer		MODEM connection idle time (1 - 9999 min).
	interface string		Name of redundant interface. Source system.interface.name.
	lockdown_lac string		Allow connection only to the specified Location Area Code (LAC).
	mode string	standalone redundant	Set MODEM operation mode to redundant or standalone.
	network_init string		AT command to set the Network name/type (AT+COPS=,[,[,]]).
	passwd1 string		Password to access the specified dialup account.
	passwd2 string		Password to access the specified dialup account.
	passwd3 string		Password to access the specified dialup account.
	peer_modem1 string	generic actiontec ascend_TNT	Specify peer MODEM type for phone1.
	peer_modem2 string	generic actiontec ascend_TNT	Specify peer MODEM type for phone2.
	peer_modem3 string	generic actiontec ascend_TNT	Specify peer MODEM type for phone3.
	phone1 string		Phone number to connect to the dialup account (must not contain spaces, and should include standard special characters).
	phone2 string		Phone number to connect to the dialup account (must not contain spaces, and should include standard special characters).
	phone3 string		Phone number to connect to the dialup account (must not contain spaces, and should include standard special characters).
	pin_init string		AT command to set the PIN (AT+PIN=).
	ppp_echo_request1 string	enable disable	Enable/disable PPP echo-request to ISP 1.
	ppp_echo_request2 string	enable disable	Enable/disable PPP echo-request to ISP 2.
	ppp_echo_request3 string	enable disable	Enable/disable PPP echo-request to ISP 3.
	priority integer		Priority of learned routes (0 - 4294967295).
	redial string	none 1 2 3 4 5 6 7 8 9 10	Redial limit (1 - 10 attempts, none = redial forever).
	reset integer		Number of dial attempts before resetting modem (0 = never reset).
	status string	enable disable	Enable/disable Modem support (equivalent to bringing an interface up or down).
	traffic_check string	enable disable	Enable/disable traffic-check.
	username1 string		User name to access the specified dialup account.
	username2 string		User name to access the specified dialup account.
	username3 string		User name to access the specified dialup account.
	wireless_port integer		Enter wireless port number, 0 for default, 1 for first port, ... (0 - 4294967295)
vdom string		Default: "root"	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure MODEM.
    fortios_system_modem:
      vdom:  "{{ vdom }}"
      system_modem:
        action: "dial"
        altmode: "enable"
        authtype1: "pap"
        authtype2: "pap"
        authtype3: "pap"
        auto_dial: "enable"
        connect_timeout: "9"
        dial_cmd1: "<your_own_value>"
        dial_cmd2: "<your_own_value>"
        dial_cmd3: "<your_own_value>"
        dial_on_demand: "enable"
        distance: "14"
        dont_send_CR1: "enable"
        dont_send_CR2: "enable"
        dont_send_CR3: "enable"
        extra_init1: "<your_own_value>"
        extra_init2: "<your_own_value>"
        extra_init3: "<your_own_value>"
        holddown_timer: "21"
        idle_timer: "22"
        interface: "<your_own_value> (source system.interface.name)"
        lockdown_lac: "<your_own_value>"
        mode: "standalone"
        network_init: "<your_own_value>"
        passwd1: "<your_own_value>"
        passwd2: "<your_own_value>"
        passwd3: "<your_own_value>"
        peer_modem1: "generic"
        peer_modem2: "generic"
        peer_modem3: "generic"
        phone1: "<your_own_value>"
        phone2: "<your_own_value>"
        phone3: "<your_own_value>"
        pin_init: "<your_own_value>"
        ppp_echo_request1: "enable"
        ppp_echo_request2: "enable"
        ppp_echo_request3: "enable"
        priority: "40"
        redial: "none"
        reset: "42"
        status: "enable"
        traffic_check: "enable"
        username1: "<your_own_value>"
        username2: "<your_own_value>"
        username3: "<your_own_value>"
        wireless_port: "48"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
build string	always	Build number of the fortigate image Sample: 1547
http_method string	always	Last method used to provision the content into FortiGate Sample: PUT
http_status string	always	Last result given by FortiGate on last operation applied Sample: 200
mkey string	success	Master key (id) used in the last call to FortiGate Sample: id
name string	always	Name of the table used to fulfill the request Sample: urlfilter
path string	always	Path of the table used to fulfill the request Sample: webfilter
revision string	always	Internal revision number Sample: 17.0.2.10658
serial string	always	Serial number of the unit Sample: FGVMEVYYQT3AB5352
status string	always	Indication of the operation's result Sample: success
vdom string	always	Virtual domain used Sample: root
version string	always	Version of the FortiGate Sample: v5.6.3

Authors

Link Zheng (@chillancezen)
Jie Xue (@JieX19)
Hongbin Lu (@fgtdev-hblu)
Frank Shen (@frankshen01)
Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/fortinet/fortios/fortios_system_modem_module.html