f5networks.f5_modules.bigip_device_sshd – Manage the SSHD settings of a BIG-IP

Note

This plugin is part of the f5networks.f5_modules collection (version 1.7.1).

To install it use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_device_sshd.

New in version 1.0.0: of f5networks.f5_modules

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

Manage the SSHD (secure shell daemon) settings of a BIG-IP.

Parameters

Parameter		Choices/Defaults	Comments
allow list / elements=string			If you have enabled SSH access, specifies the IP address or address range for other systems that can use SSH to communicate with this system. To specify all addresses, use the value `all`. An IP address can be specified, such as 172.27.1.10. IP ranges can be specified, such as 172.27.. or 172.27.0.0/255.255.0.0. To remove SSH access, specify an empty list or an empty string.
banner string		enabled disabled	Whether to enable the banner or not.
banner_text string			Specifies the text to include on the pre-login banner, which displays when a user attempts to login to the system using SSH.
inactivity_timeout integer			Specifies the number of seconds before inactivity causes an SSH session to log out.
log_level string		debug debug1 debug2 debug3 error fatal info quiet verbose	Specifies the minimum SSHD message level to include in the system log.
login string		enabled disabled	When checked `enabled`, specifies the system accepts SSH communication.
port integer			Port on which you want the SSH daemon to run.
provider dictionary added in 1.0.0 of f5networks.f5_modules			A dict object containing connection details.
	auth_provider string		Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
	no_f5_teem boolean	no yes	If `yes`, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable `F5_TEEM`.
	password string / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server string / required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port integer	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	rest ←	Configures the transport connection to use when connecting to the remote device.
	user string / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.

Notes

Note

Requires BIG-IP version 12.0.0 or greater
For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Set the banner for the SSHD service from a string
  bigip_device_sshd:
    banner: enabled
    banner_text: banner text goes here
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set the banner for the SSHD service from a file
  bigip_device_sshd:
    banner: enabled
    banner_text: "{{ lookup('file', '/path/to/file') }}"
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set the SSHD service to run on port 2222
  bigip_device_sshd:
    port: 2222
    provider:
      user: admin
      password: secret
      server: lb.mydomain.com
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
allow list / elements=string	changed	If you have enabled SSH access, specifies the IP address or address range for other systems that can use SSH to communicate with this system. Sample: 192.0.2.*
banner string	changed	Whether the banner is enabled or not. Sample: True
banner_text string	changed and success	Specifies the text included on the pre-login banner which displays when a user attempts to login to the system using SSH. Sample: This is a corporate device. Connecting to it without...
inactivity_timeout integer	changed	The number of seconds before inactivity causes an SSH session to log out. Sample: 10
log_level string	changed	The minimum SSHD message level to include in the system log. Sample: debug
login boolean	changed	Specifies whether the system accepts SSH communications or not. Sample: True
port integer	changed	Port on which you want the SSH daemon to run. Sample: 22

Authors

Tim Rupp (@caphrim007)
Wojciech Wypior (@wojtek0806)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/f5networks/f5_modules/bigip_device_sshd_module.html