inspur.sm.add_ldisk – Create logical disk.
inspur.sm.add_ldisk – Create logical disk.
Note
This plugin is part of the inspur.sm collection (version 1.1.2).
To install it use: ansible-galaxy collection install inspur.sm
.
To use it in a playbook, specify: inspur.sm.add_ldisk
.
New in version 0.1.0: of inspur.sm
Synopsis
- Create logical disk on Inspur server.
Parameters
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
access integer |
|
Access Policy, 1 - Read Write, 2 - Read Only, 3 - Blocked. Required when Info=None. | |
cache integer |
|
Drive Cache, 1 - Unchanged, 2 - Enabled,3 - Disabled. Required when Info=None. | |
ctrl_id integer |
Raid controller ID. Required when Info=None. | ||
host string |
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. | ||
info string |
|
Show controller and physical drive info. | |
init integer |
|
Init State, 1 - No Init, 2 - Quick Init, 3 - Full Init. Required when Info=None. | |
io integer |
|
IO Policy, 1 - Direct IO, 2 - Cached IO. Required when Info=None. | |
level integer |
|
RAID Level, 0 - RAID0, 1 - RAID1, 5 - RAID5, 6 - RAID6, 10 - RAID10. Required when Info=None. | |
password string |
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable | ||
provider dictionary |
A dict object containing connection details. | ||
host string |
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. | ||
password string |
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable | ||
username string |
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable | ||
r integer |
|
Read Policy, 1 - Read Ahead, 2 - No Read Ahead. Required when Info=None. | |
select integer |
Select Size, from 1 to 100. Required when Info=None. | ||
size integer |
|
Strip Size, 1 - 64k, 2 - 128k, 3 - 256k, 4 - 512k, 5 - 1024k. Required when Info=None. | |
slot list / elements=integer |
Slot Num,input multiple slotNumber like 0,1,2.... Required when Info=None. | ||
username string |
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable | ||
w integer |
|
Write Policy, 1 - Write Throgh, 2 - Write Back, 3 - Write caching ok if bad BBU. Required when Info=None. |
Examples
- name: Add ldisk test
hosts: ism
connection: local
gather_facts: no
vars:
ism:
host: "{{ ansible_ssh_host }}"
username: "{{ username }}"
password: "{{ password }}"
tasks:
- name: "Show pdisk information"
inspur.sm.add_ldisk:
info: "show"
provider: "{{ ism }}"
- name: "Add ldisk"
inspur.sm.add_ldisk:
ctrl_id: 0
level: 1
size: 1
access: 1
r: 1
w: 1
io: 1
cache: 1
init: 2
select: 10
slot: 0,1
provider: "{{ ism }}"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
changed boolean |
always |
Check to see if a change was made on the device.
|
message string |
always |
Messages returned after module execution.
|
state string |
always |
Status after module execution.
|
Authors
- WangBaoshan (@ISIB-group)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/inspur/sm/add_ldisk_module.html