inspur.sm.edit_dns – Set dns information.

inspur.sm.edit_dns – Set dns information.

Note

This plugin is part of the inspur.sm collection (version 1.1.2).

To install it use: ansible-galaxy collection install inspur.sm.

To use it in a playbook, specify: inspur.sm.edit_dns.

New in version 0.1.0: of inspur.sm

• Synopsis
• Parameters
• Examples
• Return Values

Synopsis

• Set dns information on Inspur server.

Parameters

Parameter		Choices/Defaults	Comments
dns_iface string			DNS Interface,input like 'eth0', 'eth1', 'bond0'. Required when dns_manual=auto.
dns_manual string		manual auto	DNS Settings.
dns_priority string		4 6	IP Priority. Required when dns_manual=auto.
dns_server1 string			DNS Server1 IPv4 or IPv6 address. Required when dns_manual=manual.
dns_server2 string			DNS Server2 IPv4 or IPv6 address. Required when dns_manual=manual.
dns_server3 string			DNS Server3 IPv4 or IPv6 address. Required when dns_manual=manual.
dns_status string		enable disable	DNS status.
domain_iface string			Network Interface,input like 'eth0_v4', 'eth0_v6', 'eth1_v4', 'eth1_v6', 'bond0_v4', 'bond0_v6'. Required when domain_manual=auto.
domain_manual string		manual auto	Domain Settings.
domain_name string			Domain Name. Required when domain_manual=manual.
host string			Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
host_cfg string		manual auto	Host Settings.
host_name string			Host Name. Required when host_cfg=manual.
password string			Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
provider dictionary			A dict object containing connection details.
	host string		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
	username string		Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
username string			Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

Examples

- name: DNS test
  hosts: ism
  connection: local
  gather_facts: no
  vars:
    ism:
      host: "{{ ansible_ssh_host }}"
      username: "{{ username }}"
      password: "{{ password }}"

  tasks:

  - name: "Set dns information"
    inspur.sm.edit_dns:
      dns_status: "disable"
      provider: "{{ ism }}"

  - name: "Set dns information"
    inspur.sm.edit_dns:
      dns_status: "enable"
      host_cfg: "manual"
      host_name: "123456789"
      domain_manual: "auto"
      domain_iface: "eth0_v4"
      dns_manual: "manual"
      dns_server1: "100.2.2.2"
      dns_server2: "100.2.2.3"
      dns_server3: "100.2.2.4"
      provider: "{{ ism }}"

  - name: "Set dns information"
    inspur.sm.edit_dns:
      dns_status: "enable"
      host_cfg: "manual"
      host_name: "123456789"
      domain_manual: "manual"
      domain_name: "inspur.com"
      dns_manual: "auto"
      dns_iface: "eth0"
      dns_priority: "4"
      provider: "{{ ism }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	Check to see if a change was made on the device.
message string	always	Messages returned after module execution.
state string	always	Status after module execution.

Authors

• WangBaoshan (@ISIB-group)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/inspur/sm/edit_dns_module.html