arista.eos.eos_bgp_address_family – Manages BGP address family resource module
arista.eos.eos_bgp_address_family – Manages BGP address family resource module
Note
This plugin is part of the arista.eos collection (version 1.3.0).
To install it use: ansible-galaxy collection install arista.eos
.
To use it in a playbook, specify: arista.eos.eos_bgp_address_family
.
New in version 1.4.0: of arista.eos
Synopsis
- This module configures and manages the attributes of BGP AF on Arista EOS platforms.
Parameters
Parameter | Choices/Defaults | Comments | ||||
---|---|---|---|---|---|---|
config dictionary |
Configurations for BGP address family. | |||||
address_family list / elements=dictionary |
Enable address family and enter its config mode | |||||
afi string |
|
address family. | ||||
bgp_params dictionary |
BGP parameters. | |||||
additional_paths string |
|
BGP additional-paths commands | ||||
next_hop_address_family string |
|
Next-hop address-family configuration | ||||
next_hop_unchanged boolean |
|
Preserve original nexthop while advertising routes to eBGP peers. | ||||
redistribute_internal boolean |
|
Redistribute internal BGP routes. | ||||
route string |
Configure route-map for route installation. | |||||
graceful_restart boolean |
|
Enable graceful restart mode. | ||||
neighbor list / elements=dictionary |
Configure routing for a network. | |||||
activate boolean |
|
Activate neighbor in the address family. | ||||
additional_paths string |
|
BGP additional-paths commands. | ||||
default_originate dictionary |
Originate default route to this neighbor. | |||||
always boolean |
|
Always originate default route to this neighbor. | ||||
route_map string |
Route map reference. | |||||
encapsulation dictionary |
Default transport encapsulation for neighbor. Applicable for evpn address-family. | |||||
source_interface string |
Source interface to update BGP next hop address. Applicable for mpls transport. | |||||
transport string |
|
MPLS/VXLAN transport. | ||||
graceful_restart boolean |
|
Enable graceful restart mode. | ||||
next_hop_address_family string |
|
Next-hop address-family configuration | ||||
next_hop_unchanged boolean |
|
Preserve original nexthop while advertising routes to eBGP peers. | ||||
peer string |
Neighbor address/ peer-group name. | |||||
prefix_list dictionary |
Prefix list reference. | |||||
direction string |
|
Configure an inbound/outbound prefix-list. | ||||
name string |
prefix list name. | |||||
route_map dictionary |
Route map reference. | |||||
direction string |
|
Configure an inbound/outbound route-map. | ||||
name string |
Route map name. | |||||
weight integer |
Weight to assign. | |||||
network list / elements=dictionary |
configure routing for network. | |||||
address string |
network address. | |||||
route_map string |
Route map reference. | |||||
redistribute list / elements=dictionary |
Redistribute routes in to BGP. | |||||
isis_level string |
|
Applicable for isis routes. Specify isis route level. | ||||
ospf_route string |
|
ospf route options. | ||||
protocol string |
|
Routes to be redistributed. | ||||
route_map string |
Route map reference. | |||||
route_target dictionary |
Route target | |||||
mode string |
|
route import or route export. | ||||
target string |
route target | |||||
safi string |
|
Address family type for ipv4. | ||||
vrf string |
name of the VRF in which BGP will be configured. | |||||
as_number string |
Autonomous system number. | |||||
running_config string |
This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config | section bgp. The state parsed reads the configuration from | |||||
state string |
|
The state the configuration should be left in. |
Notes
Note
- Tested against Arista EOS 4.23.0F
- This module works with connection
network_cli
. See the EOS Platform Options.
Examples
# Using merged
# Before state
# veos(config)#show running-config | section bgp
# veos(config)#
- name: Merge provided configuration with device configuration
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
redistribute:
- protocol: "ospf3"
ospf_route: "external"
network:
- address: "1.1.1.0/24"
- address: "1.5.1.0/24"
route_map: "MAP01"
- afi: "ipv6"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
- afi: "ipv6"
redistribute:
- protocol: "isis"
isis_level: "level-2"
route_target:
mode: "export"
target: "33:11"
vrf: "vrft"
state: merged
# After state:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 activate
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# route-target export 33:11
# redistribute isis level-2
# veos(config-router-bgp)#
# Module Execution:
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ],
# "route_target": {
# "mode": "export",
# "target": "33:11"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {},
# "changed": true,
# "commands": [
# "router bgp 10",
# "address-family ipv4",
# "redistribute ospf3 match external",
# "network 1.1.1.0/24",
# "network 1.5.1.0/24 route-map MAP01",
# "exit",
# "address-family ipv6",
# "neighbor peer2 default-originate always",
# "bgp additional-paths receive",
# "exit",
# "vrf vrft",
# "address-family ipv6",
# "redistribute isis level-2",
# "route-target export 33:11",
# "exit",
# "exit"
# ],
# Using replaced:
# Before State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 activate
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# route-target export 33:11
# redistribute isis level-2
# veos(config-router-bgp)#
#
- name: Replace
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv6"
vrf: "vrft"
redistribute:
- protocol: "ospf3"
ospf_route: "external"
- afi: "ipv6"
redistribute:
- protocol: "isis"
isis_level: "level-2"
state: replaced
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# neighbor peer2 default-originate always
# redistribute isis level-2
# !
# vrf vrft
# address-family ipv6
# redistribute ospf3 match external
# veos(config-router-bgp)#
#
#
# # Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "neighbor": [
# {
# "activate": true,
# "peer": "1.1.1.1"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "neighbor": [
# {
# "activate": true,
# "peer": "1.1.1.1"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "activate": true,
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ],
# "route_target": {
# "mode": "export",
# "target": "33:11"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "changed": true,
# "commands": [
# "router bgp 10",
# "vrf vrft",
# "address-family ipv6",
# "redistribute ospf3 match external",
# "no redistribute isis level-2",
# "no route-target export 33:11",
# "exit",
# "exit",
# "address-family ipv6",
# "redistribute isis level-2",
# "no neighbor peer2 activate",
# "no bgp additional-paths receive",
# "exit"
# ],
# Using overridden (overriding af at global context):
# Before state:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# neighbor peer2 default-originate always
# redistribute isis level-2
# !
# vrf vrft
# address-family ipv6
# redistribute ospf3 match external
# veos(config-router-bgp)#
- name: Overridden
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
state: overridden
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# redistribute ospf3 match external
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "neighbor": [
# {
# "activate": true,
# "peer": "1.1.1.1"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "changed": true,
# "commands": [
# "router bgp 10",
# "address-family ipv4",
# "no redistribute ospf3 match external",
# "no network 1.1.1.0/24",
# "no network 1.5.1.0/24 route-map MAP01",
# "neighbor peer2 default-originate always",
# "no neighbor 1.1.1.1 activate",
# "bgp additional-paths receive",
# "exit",
# "no address-family ipv6"
# ],
# using Overridden (overridding af in vrf context):
# Before State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# route-target export 33:11
# redistribute isis level-2
# redistribute ospf3 match external
# veos(config-router-bgp)#
- name: Overridden
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
vrf: vrft
state: overridden
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# },
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "route_target": {
# "mode": "export",
# "target": "33:11"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "changed": true,
# "commands": [
# "router bgp 10",
# "vrf vrft",
# "address-family ipv4",
# "neighbor peer2 default-originate always",
# "bgp additional-paths receive",
# "exit",
# "exit",
# " vrf vrft",
# "no address-family ipv6"
# ],
# Using Deleted:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
- name: Delete
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv6"
vrf: "vrft"
- afi: "ipv6"
state: deleted
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# Using parsed:
# parsed_bgp_address_family.cfg :
# router bgp 10
# neighbor n2 peer-group
# neighbor n2 next-hop-unchanged
# neighbor n2 maximum-routes 12000
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# redistribute ospf3 match external
# !
# address-family ipv6
# no bgp additional-paths receive
# neighbor n2 next-hop-unchanged
# redistribute isis level-2
# !
# vrf bgp_10
# ip access-group acl01
# ucmp fec threshold trigger 33 clear 22 warning-only
# !
# address-family ipv4
# route-target import 20:11
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# !
# address-family ipv6
# redistribute ospf3 match external
- name: parse configs
arista.eos.eos_bgp_address_family:
running_config: "{{ lookup('file', './parsed_bgp_address_family.cfg') }}"
state: parsed
# Module Execution:
# "parsed": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "neighbor": [
# {
# "next_hop_unchanged": true,
# "peer": "n2"
# }
# ],
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ]
# },
# {
# "afi": "ipv4",
# "route_target": {
# "mode": "import",
# "target": "20:11"
# },
# "vrf": "bgp_10"
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# }
# }
# Using gathered:
# Device config:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
- name: gather configs
arista.eos.eos_bgp_address_family:
state: gathered
# Module Execution:
# "gathered": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# using rendered:
- name: Render
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
redistribute:
- protocol: "ospf3"
ospf_route: "external"
network:
- address: "1.1.1.0/24"
- address: "1.5.1.0/24"
route_map: "MAP01"
- afi: "ipv6"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
- afi: "ipv6"
redistribute:
- protocol: "isis"
isis_level: "level-2"
route_target:
mode: "export"
target: "33:11"
vrf: "vrft"
state: rendered
# Module Execution:
# "rendered": [
# "router bgp 10",
# "address-family ipv4",
# "redistribute ospf3 match external",
# "network 1.1.1.0/24",
# "network 1.5.1.0/24 route-map MAP01",
# "exit",
# "address-family ipv6",
# "neighbor peer2 default-originate always",
# "bgp additional-paths receive",
# "exit",
# "vrf vrft",
# "address-family ipv6",
# "redistribute isis level-2",
# "route-target export 33:11",
# "exit",
# "exit"
# ]
#
Authors
- Gomathi Selvi Srinivasan (@GomathiselviS)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/arista/eos/eos_bgp_address_family_module.html