mellanox.onyx.onyx_ntp_servers_peers – Configures NTP peers and servers parameters

Note

This plugin is part of the mellanox.onyx collection (version 1.0.0).

To install it use: ansible-galaxy collection install mellanox.onyx.

To use it in a playbook, specify: mellanox.onyx.onyx_ntp_servers_peers.

New in version 0.2.0: of mellanox.onyx

Synopsis
Parameters
Examples
Return Values

Synopsis

This module provides declarative management of NTP peers and servers configuration on Mellanox ONYX network devices.

Parameters

Parameter		Choices/Defaults	Comments
ntpdate string			Sets system clock once from a remote server using NTP.
peer list / elements=string			List of ntp peers.
	enabled boolean	no yes	Disables/Enables ntp peer state
	ip_or_name string / required		Configures ntp peer name or ip.
	key_id integer		Used to configure the key-id for the ntp peer
	state string	present absent	Indicates if the ntp peer exists or should be deleted
	version integer	3 4	version number for the ntp peer
server list / elements=string			List of ntp servers.
	enabled boolean	no yes	Disables/Enables ntp server
	ip_or_name string / required		Configures ntp server name or ip.
	key_id integer		Used to configure the key-id for the ntp server
	state string	present absent	Indicates if the ntp peer exists or should be deleted.
	trusted_enable boolean	no yes	Disables/Enables the trusted state for the ntp server.
	version integer	3 4	version number for the ntp server

Examples

- name: Configure NTP peers and servers
  onyx_ntp_peers_servers:
    peer:
       - ip_or_name: 1.1.1.1
         enabled: yes
         version: 4
         key_id: 6
         state: present
    server:
       - ip_or_name: 2.2.2.2
         enabled: true
         version: 3
         key_id: 8
         trusted_enable: no
         state: present
    ntpdate: 192.168.10.10

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list / elements=string	always.	The list of configuration mode commands to send to the device Sample: ['ntp peer 1.1.1.1 disable no ntp peer 1.1.1.1 disable ntp peer 1.1.1.1 keyId 6 ntp peer 1.1.1.1 version 4 no ntp peer 1.1.1.1 ntp server 2.2.2.2 disable no ntp server 2.2.2.2 disable ntp server 2.2.2.2 keyID 8 ntp server 2.2.2.2 version 3 ntp server 2.2.2.2 trusted-enable no ntp server 2.2.2.2 ntp server 192.168.10.10 ntpdate 192.168.10.10']

Authors

Sara-Touqan (@sarato)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/mellanox/onyx/onyx_ntp_servers_peers_module.html