community.network.ce_ospf_vrf – Manages configuration of an OSPF VPN instance on HUAWEI CloudEngine switches.

Note

This plugin is part of the community.network collection (version 2.0.1).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_ospf_vrf.

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

Manages configuration of an OSPF VPN instance on HUAWEI CloudEngine switches.

Parameters

Parameter	Choices/Defaults	Comments
bandwidth string		Specifies the reference bandwidth used to assign ospf cost. Valid values are an integer, in Mbps, 1 - 2147483648, the default value is 100.
description string		Specifies the description information of ospf process.
lsaaholdinterval string		Specifies the hold interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 500.
lsaainterval string		Specifies the interval of arrive LSA when use the general timer. Valid value is an integer, in millisecond, from 0 to 10000.
lsaalflag boolean	no ← yes	Specifies the mode of timer to calculate interval of arrive LSA. If set the parameter but not specifies value, the default will be used. If true use general timer. If false use intelligent timer.
lsaamaxinterval string		Specifies the max interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 1000.
lsaastartinterval string		Specifies the start interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 500.
lsaoholdinterval string		Specifies the hold interval of originate LSA . Valid value is an integer, in millisecond, from 0 to 5000, the default value is 1000.
lsaointerval string		Specifies the interval of originate LSA . Valid value is an integer, in second, from 0 to 10, the default value is 5.
lsaointervalflag boolean	no ← yes	Specifies whether cancel the interval of LSA originate or not. If set the parameter but noe specifies value, the default will be used. true:cancel the interval of LSA originate, the interval is 0. false:do not cancel the interval of LSA originate.
lsaomaxinterval string		Specifies the max interval of originate LSA . Valid value is an integer, in millisecond, from 1 to 10000, the default value is 5000.
lsaostartinterval string		Specifies the start interval of originate LSA . Valid value is an integer, in millisecond, from 0 to 1000, the default value is 500.
ospf string / required		The ID of the ospf process. Valid values are an integer, 1 - 4294967295, the default value is 1.
route_id string		Specifies the ospf private route id,. Valid values are a string, formatted as an IP address (i.e. "10.1.1.1") the length is 0 - 20.
spfholdinterval string		Specifies the hold interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 5000, the default value is 200.
spfinterval string		Specifies the interval to calculate SPF when use second level timer. Valid value is an integer, in second, from 1 to 10.
spfintervalmi string		Specifies the interval to calculate SPF when use millisecond level timer. Valid value is an integer, in millisecond, from 1 to 10000.
spfintervaltype string	intelligent-timer ← timer millisecond	Specifies the mode of timer which used to calculate SPF. If set the parameter but noe specifies value, the default will be used. If is intelligent-timer, then use intelligent timer. If is timer, then use second level timer. If is millisecond, then use millisecond level timer.
spfmaxinterval string		Specifies the max interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 20000, the default value is 5000.
spfstartinterval string		Specifies the start interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 1000, the default value is 50.
state string	present ← absent	Specify desired state of the resource.
vrf string	Default: "_public_"	Specifies the vpn instance which use ospf,length is 1 - 31. Valid values are a string.

Notes

Note

This module requires the netconf system service be enabled on the remote device being managed.
Recommended connection is netconf.
This module also works with local connections for legacy playbooks.

Examples

- name: Ospf vrf module test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: Configure ospf route id
    community.network.ce_ospf_vrf:
      ospf: 2
      route_id: 2.2.2.2
      lsaointervalflag: False
      lsaointerval: 2
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device
end_state dictionary	verbose mode	k/v pairs of configuration after module execution Sample: {'bandwidthReference': '100', 'description': None, 'lsaArrivalFlag': 'false', 'lsaArrivalHoldInterval': '500', 'lsaArrivalInterval': None, 'lsaArrivalMaxInterval': '1000', 'lsaArrivalStartInterval': '500', 'lsaOriginateHoldInterval': '1000', 'lsaOriginateInterval': '2', 'lsaOriginateIntervalFlag': 'false', 'lsaOriginateMaxInterval': '5000', 'lsaOriginateStartInterval': '500', 'processId': '2', 'routerId': '2.2.2.2', 'spfScheduleHoldInterval': '1000', 'spfScheduleInterval': None, 'spfScheduleIntervalMillisecond': None, 'spfScheduleIntervalType': 'intelligent-timer', 'spfScheduleMaxInterval': '10000', 'spfScheduleStartInterval': '500', 'vrfName': '_public_'}
existing dictionary	verbose mode	k/v pairs of existing configuration Sample: {'bandwidthReference': '100', 'description': None, 'lsaArrivalFlag': 'false', 'lsaArrivalHoldInterval': '500', 'lsaArrivalInterval': None, 'lsaArrivalMaxInterval': '1000', 'lsaArrivalStartInterval': '500', 'lsaOriginateHoldInterval': '1000', 'lsaOriginateInterval': '2', 'lsaOriginateIntervalFlag': 'false', 'lsaOriginateMaxInterval': '5000', 'lsaOriginateStartInterval': '500', 'processId': '2', 'routerId': '2.2.2.2', 'spfScheduleHoldInterval': '1000', 'spfScheduleInterval': None, 'spfScheduleIntervalMillisecond': None, 'spfScheduleIntervalType': 'intelligent-timer', 'spfScheduleMaxInterval': '10000', 'spfScheduleStartInterval': '500', 'vrfName': '_public_'}
proposed dictionary	verbose mode	k/v pairs of parameters passed into module Sample: {'bandwidth': '100', 'description': None, 'lsaaholdinterval': '500', 'lsaainterval': None, 'lsaalflag': 'False', 'lsaamaxinterval': '1000', 'lsaastartinterval': '500', 'lsaoholdinterval': '1000', 'lsaointerval': '2', 'lsaointervalflag': 'False', 'lsaomaxinterval': '5000', 'lsaostartinterval': '500', 'process_id': '2', 'route_id': '2.2.2.2', 'spfholdinterval': '1000', 'spfinterval': None, 'spfintervalmi': None, 'spfintervaltype': 'intelligent-timer', 'spfmaxinterval': '10000', 'spfstartinterval': '500', 'vrf': '_public_'}
updates list / elements=string	always	commands sent to the device Sample: ['ospf 2']

Authors

Yang yang (@QijunPan)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/community/network/ce_ospf_vrf_module.html