fortinet.fortios.fortios_wireless_controller_wtp_profile – Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms in Fortinet’s FortiOS and FortiGate.
fortinet.fortios.fortios_wireless_controller_wtp_profile – Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms in Fortinet’s FortiOS and FortiGate.
Note
This plugin is part of the fortinet.fortios collection (version 1.1.8).
To install it use: ansible-galaxy collection install fortinet.fortios.
To use it in a playbook, specify: fortinet.fortios.fortios_wireless_controller_wtp_profile.
New in version 2.8: of fortinet.fortios
Synopsis
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify wireless_controller feature and wtp_profile category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
- ansible>=2.9.0
Parameters
| Parameter | Choices/Defaults | Comments | |||
|---|---|---|---|---|---|
|
access_token string |
Token-based authentication. Generated from GUI of Fortigate. | ||||
|
state string added in 2.9 of fortinet.fortios |
|
Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level. | |||
|
vdom string |
Default: "root" |
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. | |||
|
wireless_controller_wtp_profile dictionary |
Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms. | ||||
|
allowaccess string |
|
Control management access to the managed WTP, FortiAP, or AP. Separate entries with a space. | |||
|
ap_country string |
|
Country in which this WTP, FortiAP or AP will operate . | |||
|
ble_profile string |
Bluetooth Low Energy profile name. Source wireless-controller.ble-profile.name. | ||||
|
comment string |
Comment. | ||||
|
control_message_offload string |
|
Enable/disable CAPWAP control message data channel offload. | |||
|
deny_mac_list list / elements=string |
List of MAC addresses that are denied access to this WTP, FortiAP, or AP. | ||||
|
id integer / required |
ID. | ||||
|
mac string |
A WiFi device with this MAC address is denied access to this WTP, FortiAP or AP. | ||||
|
dtls_in_kernel string |
|
Enable/disable data channel DTLS in kernel. | |||
|
dtls_policy string |
|
WTP data channel DTLS policy . | |||
|
energy_efficient_ethernet string |
|
Enable/disable use of energy efficient Ethernet on WTP. | |||
|
ext_info_enable string |
|
Enable/disable station/VAP/radio extension information. | |||
|
handoff_roaming string |
|
Enable/disable client load balancing during roaming to avoid roaming delay . | |||
|
handoff_rssi integer |
Minimum received signal strength indicator (RSSI) value for handoff (20 - 30). | ||||
|
handoff_sta_thresh integer |
Threshold value for AP handoff (5 - 35). | ||||
|
ip_fragment_preventing string |
|
Select how to prevent IP fragmentation for CAPWAP tunneled control and data packets . | |||
|
lan dictionary |
WTP LAN port mapping. | ||||
|
port1_mode string |
|
LAN port 1 mode. | |||
|
port1_ssid string |
Bridge LAN port 1 to SSID. Source wireless-controller.vap.name. | ||||
|
port2_mode string |
|
LAN port 2 mode. | |||
|
port2_ssid string |
Bridge LAN port 2 to SSID. Source wireless-controller.vap.name. | ||||
|
port3_mode string |
|
LAN port 3 mode. | |||
|
port3_ssid string |
Bridge LAN port 3 to SSID. Source wireless-controller.vap.name. | ||||
|
port4_mode string |
|
LAN port 4 mode. | |||
|
port4_ssid string |
Bridge LAN port 4 to SSID. Source wireless-controller.vap.name. | ||||
|
port5_mode string |
|
LAN port 5 mode. | |||
|
port5_ssid string |
Bridge LAN port 5 to SSID. Source wireless-controller.vap.name. | ||||
|
port6_mode string |
|
LAN port 6 mode. | |||
|
port6_ssid string |
Bridge LAN port 6 to SSID. Source wireless-controller.vap.name. | ||||
|
port7_mode string |
|
LAN port 7 mode. | |||
|
port7_ssid string |
Bridge LAN port 7 to SSID. Source wireless-controller.vap.name. | ||||
|
port8_mode string |
|
LAN port 8 mode. | |||
|
port8_ssid string |
Bridge LAN port 8 to SSID. Source wireless-controller.vap.name. | ||||
|
port_mode string |
|
LAN port mode. | |||
|
port_ssid string |
Bridge LAN port to SSID. Source wireless-controller.vap.name. | ||||
|
lbs dictionary |
Set various location based service (LBS) options. | ||||
|
aeroscout string |
|
Enable/disable AeroScout Real Time Location Service (RTLS) support. | |||
|
aeroscout_ap_mac string |
|
Use BSSID or board MAC address as AP MAC address in the Aeroscout AP message. | |||
|
aeroscout_mmu_report string |
|
Enable/disable MU compounded report. | |||
|
aeroscout_mu string |
|
Enable/disable AeroScout support. | |||
|
aeroscout_mu_factor integer |
AeroScout Mobile Unit (MU) mode dilution factor . | ||||
|
aeroscout_mu_timeout integer |
AeroScout MU mode timeout (0 - 65535 sec). | ||||
|
aeroscout_server_ip string |
IP address of AeroScout server. | ||||
|
aeroscout_server_port integer |
AeroScout server UDP listening port. | ||||
|
ekahau_blink_mode string |
|
Enable/disable Ekahua blink mode (also called AiRISTA Flow Blink Mode) to find the location of devices connected to a wireless LAN . | |||
|
ekahau_tag string |
WiFi frame MAC address or WiFi Tag. | ||||
|
erc_server_ip string |
IP address of Ekahua RTLS Controller (ERC). | ||||
|
erc_server_port integer |
Ekahua RTLS Controller (ERC) UDP listening port. | ||||
|
fortipresence string |
|
Enable/disable FortiPresence to monitor the location and activity of WiFi clients even if they don"t connect to this WiFi network . | |||
|
fortipresence_frequency integer |
FortiPresence report transmit frequency (5 - 65535 sec). | ||||
|
fortipresence_port integer |
FortiPresence server UDP listening port . | ||||
|
fortipresence_project string |
FortiPresence project name (max. 16 characters). | ||||
|
fortipresence_rogue string |
|
Enable/disable FortiPresence finding and reporting rogue APs. | |||
|
fortipresence_secret string |
FortiPresence secret password (max. 16 characters). | ||||
|
fortipresence_server string |
FortiPresence server IP address. | ||||
|
fortipresence_unassoc string |
|
Enable/disable FortiPresence finding and reporting unassociated stations. | |||
|
station_locate string |
|
Enable/disable client station locating services for all clients, whether associated or not . | |||
|
led_schedules list / elements=string |
Recurring firewall schedules for illuminating LEDs on the FortiAP. If led-state is enabled, LEDs will be visible when at least one of the schedules is valid. Separate multiple schedule names with a space. | ||||
|
name string / required |
LED schedule name. Source firewall.schedule.group.name firewall.schedule.recurring.name. | ||||
|
led_state string |
|
Enable/disable use of LEDs on WTP . | |||
|
lldp string |
|
Enable/disable Link Layer Discovery Protocol (LLDP) for the WTP, FortiAP, or AP . | |||
|
login_passwd string |
Set the managed WTP, FortiAP, or AP"s administrator password. | ||||
|
login_passwd_change string |
|
Change or reset the administrator password of a managed WTP, FortiAP or AP (yes, default, or no). | |||
|
max_clients integer |
Maximum number of stations (STAs) supported by the WTP . | ||||
|
name string / required |
WTP (or FortiAP or AP) profile name. | ||||
|
platform dictionary |
WTP, FortiAP, or AP platform. | ||||
|
type string |
|
WTP, FortiAP or AP platform type. There are built-in WTP profiles for all supported FortiAP models. You can select a built-in profile and customize it or create a new profile. | |||
|
poe_mode string |
|
Set the WTP, FortiAP, or AP"s PoE mode. | |||
|
radio_1 dictionary |
Configuration options for radio 1. | ||||
|
amsdu string |
|
Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients . | |||
|
ap_handoff string |
|
Enable/disable AP handoff of clients to other APs . | |||
|
ap_sniffer_addr string |
MAC address to monitor. | ||||
|
ap_sniffer_bufsize integer |
Sniffer buffer size (1 - 32 MB). | ||||
|
ap_sniffer_chan integer |
Channel on which to operate the sniffer . | ||||
|
ap_sniffer_ctl string |
|
Enable/disable sniffer on WiFi control frame . | |||
|
ap_sniffer_data string |
|
Enable/disable sniffer on WiFi data frame . | |||
|
ap_sniffer_mgmt_beacon string |
|
Enable/disable sniffer on WiFi management Beacon frames . | |||
|
ap_sniffer_mgmt_other string |
|
Enable/disable sniffer on WiFi management other frames . | |||
|
ap_sniffer_mgmt_probe string |
|
Enable/disable sniffer on WiFi management probe frames . | |||
|
auto_power_high integer |
Automatic transmit power high limit in dBm (the actual range of transmit power depends on the AP platform type). | ||||
|
auto_power_level string |
|
Enable/disable automatic power-level adjustment to prevent co-channel interference . | |||
|
auto_power_low integer |
Automatic transmission power low limit in dBm (the actual range of transmit power depends on the AP platform type). | ||||
|
band string |
|
WiFi band that Radio 1 operates on. | |||
|
bandwidth_admission_control string |
|
Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it. | |||
|
bandwidth_capacity integer |
Maximum bandwidth capacity allowed (1 - 600000 Kbps). | ||||
|
beacon_interval integer |
Beacon interval. The time between beacon frames in msec (the actual range of beacon interval depends on the AP platform type). | ||||
|
call_admission_control string |
|
Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them. | |||
|
call_capacity integer |
Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60). | ||||
|
channel list / elements=string |
Selected list of wireless radio channels. | ||||
|
chan string / required |
Channel number. | ||||
|
channel_bonding string |
|
Channel bandwidth: 80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence. | |||
|
channel_utilization string |
|
Enable/disable measuring channel utilization. | |||
|
coexistence string |
|
Enable/disable allowing both HT20 and HT40 on the same radio . | |||
|
darrp string |
|
Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel . | |||
|
dtim integer |
DTIM interval. The frequency to transmit Delivery Traffic Indication Message (or Map) (DTIM) messages (1 - 255). Set higher to save client battery life. | ||||
|
frag_threshold integer |
Maximum packet size that can be sent without fragmentation (800 - 2346 bytes). | ||||
|
frequency_handoff string |
|
Enable/disable frequency handoff of clients to other channels . | |||
|
max_clients integer |
Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware. | ||||
|
max_distance integer |
Maximum expected distance between the AP and clients (0 - 54000 m). | ||||
|
mode string |
|
Mode of radio 1. Radio 1 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer. | |||
|
power_level integer |
Radio power level as a percentage of the maximum transmit power (0 - 100). | ||||
|
powersave_optimize string |
|
Enable client power-saving features such as TIM, AC VO, and OBSS etc. | |||
|
protection_mode string |
|
Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable). | |||
|
radio_id integer |
radio-id | ||||
|
rts_threshold integer |
Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes). | ||||
|
short_guard_interval string |
|
Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns. | |||
|
spectrum_analysis string |
|
Enable/disable spectrum analysis to find interference that would negatively impact wireless performance. | |||
|
transmit_optimize string |
|
Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default. | |||
|
vap_all string |
|
Enable/disable the automatic inheritance of all Virtual Access Points (VAPs) . | |||
|
vaps list / elements=string |
Manually selected list of Virtual Access Points (VAPs). | ||||
|
name string / required |
Virtual Access Point (VAP) name. Source wireless-controller.vap-group.name wireless-controller.vap.name. | ||||
|
wids_profile string |
Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. Source wireless-controller.wids-profile.name. | ||||
|
radio_2 dictionary |
Configuration options for radio 2. | ||||
|
amsdu string |
|
Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients . | |||
|
ap_handoff string |
|
Enable/disable AP handoff of clients to other APs . | |||
|
ap_sniffer_addr string |
MAC address to monitor. | ||||
|
ap_sniffer_bufsize integer |
Sniffer buffer size (1 - 32 MB). | ||||
|
ap_sniffer_chan integer |
Channel on which to operate the sniffer . | ||||
|
ap_sniffer_ctl string |
|
Enable/disable sniffer on WiFi control frame . | |||
|
ap_sniffer_data string |
|
Enable/disable sniffer on WiFi data frame . | |||
|
ap_sniffer_mgmt_beacon string |
|
Enable/disable sniffer on WiFi management Beacon frames . | |||
|
ap_sniffer_mgmt_other string |
|
Enable/disable sniffer on WiFi management other frames . | |||
|
ap_sniffer_mgmt_probe string |
|
Enable/disable sniffer on WiFi management probe frames . | |||
|
auto_power_high integer |
Automatic transmit power high limit in dBm (the actual range of transmit power depends on the AP platform type). | ||||
|
auto_power_level string |
|
Enable/disable automatic power-level adjustment to prevent co-channel interference . | |||
|
auto_power_low integer |
Automatic transmission power low limit in dBm (the actual range of transmit power depends on the AP platform type). | ||||
|
band string |
|
WiFi band that Radio 2 operates on. | |||
|
bandwidth_admission_control string |
|
Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it. | |||
|
bandwidth_capacity integer |
Maximum bandwidth capacity allowed (1 - 600000 Kbps). | ||||
|
beacon_interval integer |
Beacon interval. The time between beacon frames in msec (the actual range of beacon interval depends on the AP platform type). | ||||
|
call_admission_control string |
|
Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them. | |||
|
call_capacity integer |
Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60). | ||||
|
channel list / elements=string |
Selected list of wireless radio channels. | ||||
|
chan string / required |
Channel number. | ||||
|
channel_bonding string |
|
Channel bandwidth: 80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence. | |||
|
channel_utilization string |
|
Enable/disable measuring channel utilization. | |||
|
coexistence string |
|
Enable/disable allowing both HT20 and HT40 on the same radio . | |||
|
darrp string |
|
Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel . | |||
|
dtim integer |
DTIM interval. The frequency to transmit Delivery Traffic Indication Message (or Map) (DTIM) messages (1 - 255). Set higher to save client battery life. | ||||
|
frag_threshold integer |
Maximum packet size that can be sent without fragmentation (800 - 2346 bytes). | ||||
|
frequency_handoff string |
|
Enable/disable frequency handoff of clients to other channels . | |||
|
max_clients integer |
Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware. | ||||
|
max_distance integer |
Maximum expected distance between the AP and clients (0 - 54000 m). | ||||
|
mode string |
|
Mode of radio 2. Radio 2 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer. | |||
|
power_level integer |
Radio power level as a percentage of the maximum transmit power (0 - 100). | ||||
|
powersave_optimize string |
|
Enable client power-saving features such as TIM, AC VO, and OBSS etc. | |||
|
protection_mode string |
|
Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable). | |||
|
radio_id integer |
radio-id | ||||
|
rts_threshold integer |
Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes). | ||||
|
short_guard_interval string |
|
Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns. | |||
|
spectrum_analysis string |
|
Enable/disable spectrum analysis to find interference that would negatively impact wireless performance. | |||
|
transmit_optimize string |
|
Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default. | |||
|
vap_all string |
|
Enable/disable the automatic inheritance of all Virtual Access Points (VAPs) . | |||
|
vaps list / elements=string |
Manually selected list of Virtual Access Points (VAPs). | ||||
|
name string / required |
Virtual Access Point (VAP) name. Source wireless-controller.vap-group.name wireless-controller.vap.name. | ||||
|
wids_profile string |
Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. Source wireless-controller.wids-profile.name. | ||||
|
split_tunneling_acl list / elements=string |
Split tunneling ACL filter list. | ||||
|
dest_ip string |
Destination IP and mask for the split-tunneling subnet. | ||||
|
id integer / required |
ID. | ||||
|
split_tunneling_acl_local_ap_subnet string |
|
Enable/disable automatically adding local subnetwork of FortiAP to split-tunneling ACL . | |||
|
split_tunneling_acl_path string |
|
Split tunneling ACL path is local/tunnel. | |||
|
state string |
|
Deprecated Starting with Ansible 2.9 we recommend using the top-level 'state' parameter. Indicates whether to create or remove the object. | |||
|
tun_mtu_downlink integer |
Downlink CAPWAP tunnel MTU (0, 576, or 1500 bytes). | ||||
|
tun_mtu_uplink integer |
Uplink CAPWAP tunnel MTU (0, 576, or 1500 bytes). | ||||
|
wan_port_mode string |
|
Enable/disable using a WAN port as a LAN port. |
Notes
Note
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
Examples
- hosts: fortigates
collections:
- fortinet.fortios
connection: httpapi
vars:
vdom: "root"
ansible_httpapi_use_ssl: yes
ansible_httpapi_validate_certs: no
ansible_httpapi_port: 443
tasks:
- name: Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.
fortios_wireless_controller_wtp_profile:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
wireless_controller_wtp_profile:
allowaccess: "telnet"
ap_country: "NA"
ble_profile: "<your_own_value> (source wireless-controller.ble-profile.name)"
comment: "Comment."
control_message_offload: "ebp-frame"
deny_mac_list:
-
id: "9"
mac: "<your_own_value>"
dtls_in_kernel: "enable"
dtls_policy: "clear-text"
energy_efficient_ethernet: "enable"
ext_info_enable: "enable"
handoff_roaming: "enable"
handoff_rssi: "16"
handoff_sta_thresh: "17"
ip_fragment_preventing: "tcp-mss-adjust"
lan:
port_mode: "offline"
port_ssid: "<your_own_value> (source wireless-controller.vap.name)"
port1_mode: "offline"
port1_ssid: "<your_own_value> (source wireless-controller.vap.name)"
port2_mode: "offline"
port2_ssid: "<your_own_value> (source wireless-controller.vap.name)"
port3_mode: "offline"
port3_ssid: "<your_own_value> (source wireless-controller.vap.name)"
port4_mode: "offline"
port4_ssid: "<your_own_value> (source wireless-controller.vap.name)"
port5_mode: "offline"
port5_ssid: "<your_own_value> (source wireless-controller.vap.name)"
port6_mode: "offline"
port6_ssid: "<your_own_value> (source wireless-controller.vap.name)"
port7_mode: "offline"
port7_ssid: "<your_own_value> (source wireless-controller.vap.name)"
port8_mode: "offline"
port8_ssid: "<your_own_value> (source wireless-controller.vap.name)"
lbs:
aeroscout: "enable"
aeroscout_ap_mac: "bssid"
aeroscout_mmu_report: "enable"
aeroscout_mu: "enable"
aeroscout_mu_factor: "43"
aeroscout_mu_timeout: "44"
aeroscout_server_ip: "<your_own_value>"
aeroscout_server_port: "46"
ekahau_blink_mode: "enable"
ekahau_tag: "<your_own_value>"
erc_server_ip: "<your_own_value>"
erc_server_port: "50"
fortipresence: "foreign"
fortipresence_frequency: "52"
fortipresence_port: "53"
fortipresence_project: "<your_own_value>"
fortipresence_rogue: "enable"
fortipresence_secret: "<your_own_value>"
fortipresence_server: "<your_own_value>"
fortipresence_unassoc: "enable"
station_locate: "enable"
led_schedules:
-
name: "default_name_61 (source firewall.schedule.group.name firewall.schedule.recurring.name)"
led_state: "enable"
lldp: "enable"
login_passwd: "<your_own_value>"
login_passwd_change: "yes"
max_clients: "66"
name: "default_name_67"
platform:
type: "AP-11N"
poe_mode: "auto"
radio_1:
amsdu: "enable"
ap_handoff: "enable"
ap_sniffer_addr: "<your_own_value>"
ap_sniffer_bufsize: "75"
ap_sniffer_chan: "76"
ap_sniffer_ctl: "enable"
ap_sniffer_data: "enable"
ap_sniffer_mgmt_beacon: "enable"
ap_sniffer_mgmt_other: "enable"
ap_sniffer_mgmt_probe: "enable"
auto_power_high: "82"
auto_power_level: "enable"
auto_power_low: "84"
band: "802.11a"
bandwidth_admission_control: "enable"
bandwidth_capacity: "87"
beacon_interval: "88"
call_admission_control: "enable"
call_capacity: "90"
channel:
-
chan: "<your_own_value>"
channel_bonding: "80MHz"
channel_utilization: "enable"
coexistence: "enable"
darrp: "enable"
dtim: "97"
frag_threshold: "98"
frequency_handoff: "enable"
max_clients: "100"
max_distance: "101"
mode: "disabled"
power_level: "103"
powersave_optimize: "tim"
protection_mode: "rtscts"
radio_id: "106"
rts_threshold: "107"
short_guard_interval: "enable"
spectrum_analysis: "enable"
transmit_optimize: "disable"
vap_all: "enable"
vaps:
-
name: "default_name_113 (source wireless-controller.vap-group.name wireless-controller.vap.name)"
wids_profile: "<your_own_value> (source wireless-controller.wids-profile.name)"
radio_2:
amsdu: "enable"
ap_handoff: "enable"
ap_sniffer_addr: "<your_own_value>"
ap_sniffer_bufsize: "119"
ap_sniffer_chan: "120"
ap_sniffer_ctl: "enable"
ap_sniffer_data: "enable"
ap_sniffer_mgmt_beacon: "enable"
ap_sniffer_mgmt_other: "enable"
ap_sniffer_mgmt_probe: "enable"
auto_power_high: "126"
auto_power_level: "enable"
auto_power_low: "128"
band: "802.11a"
bandwidth_admission_control: "enable"
bandwidth_capacity: "131"
beacon_interval: "132"
call_admission_control: "enable"
call_capacity: "134"
channel:
-
chan: "<your_own_value>"
channel_bonding: "80MHz"
channel_utilization: "enable"
coexistence: "enable"
darrp: "enable"
dtim: "141"
frag_threshold: "142"
frequency_handoff: "enable"
max_clients: "144"
max_distance: "145"
mode: "disabled"
power_level: "147"
powersave_optimize: "tim"
protection_mode: "rtscts"
radio_id: "150"
rts_threshold: "151"
short_guard_interval: "enable"
spectrum_analysis: "enable"
transmit_optimize: "disable"
vap_all: "enable"
vaps:
-
name: "default_name_157 (source wireless-controller.vap-group.name wireless-controller.vap.name)"
wids_profile: "<your_own_value> (source wireless-controller.wids-profile.name)"
split_tunneling_acl:
-
dest_ip: "<your_own_value>"
id: "161"
split_tunneling_acl_local_ap_subnet: "enable"
split_tunneling_acl_path: "tunnel"
tun_mtu_downlink: "164"
tun_mtu_uplink: "165"
wan_port_mode: "wan-lan"Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
|
build string |
always |
Build number of the fortigate image
Sample: 1547 |
|
http_method string |
always |
Last method used to provision the content into FortiGate
Sample: PUT |
|
http_status string |
always |
Last result given by FortiGate on last operation applied
Sample: 200 |
|
mkey string |
success |
Master key (id) used in the last call to FortiGate
Sample: id |
|
name string |
always |
Name of the table used to fulfill the request
Sample: urlfilter |
|
path string |
always |
Path of the table used to fulfill the request
Sample: webfilter |
|
revision string |
always |
Internal revision number
Sample: 17.0.2.10658 |
|
serial string |
always |
Serial number of the unit
Sample: FGVMEVYYQT3AB5352 |
|
status string |
always |
Indication of the operation's result
Sample: success |
|
vdom string |
always |
Virtual domain used
Sample: root |
|
version string |
always |
Version of the FortiGate
Sample: v5.6.3 |
Authors
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/fortinet/fortios/fortios_wireless_controller_wtp_profile_module.html
