fortinet.fortimanager.fmgr_wanprof_system_virtualwanlink – Configure redundant internet connections using SD-WAN (formerly virtual WAN link).
fortinet.fortimanager.fmgr_wanprof_system_virtualwanlink – Configure redundant internet connections using SD-WAN (formerly virtual WAN link).
Note
This plugin is part of the fortinet.fortimanager collection (version 2.0.1).
To install it use: ansible-galaxy collection install fortinet.fortimanager
.
To use it in a playbook, specify: fortinet.fortimanager.fmgr_wanprof_system_virtualwanlink
.
New in version 2.10: of fortinet.fortimanager
Synopsis
- This module is able to configure a FortiManager device.
- Examples include all parameters and values which need to be adjusted to data sources before usage.
Parameters
Parameter | Choices/Defaults | Comments | |||
---|---|---|---|---|---|
adom string / required |
the parameter (adom) in requested url | ||||
bypass_validation boolean |
|
only set to True when module schema diffs with FortiManager API structure, module continues to execute without validating parameters | |||
rc_failed list / elements=string |
the rc codes list with which the conditions to fail will be overriden | ||||
rc_succeeded list / elements=string |
the rc codes list with which the conditions to succeed will be overriden | ||||
state string / required |
|
the directive to create, update or delete an object | |||
wanprof string / required |
the parameter (wanprof) in requested url | ||||
wanprof_system_virtualwanlink dictionary |
the top level parameters set | ||||
fail-detect string |
|
Enable/disable SD-WAN Internet connection status checking (failure detection). | |||
health-check list / elements=string |
no description | ||||
_dynamic-server string |
no description | ||||
addr-mode string |
|
Address mode (IPv4 or IPv6). | |||
failtime integer |
Number of failures before server is considered lost (1 - 3600, default = 5). | ||||
http-agent string |
String in the http-agent field in the HTTP header. | ||||
http-get string |
URL used to communicate with the server if the protocol if the protocol is HTTP. | ||||
http-match string |
Response string expected from the server if the protocol is HTTP. | ||||
interval integer |
Status check interval, or the time between attempting to connect to the server (1 - 3600 sec, default = 5). | ||||
members string |
Member sequence number list. | ||||
name string |
Status check or health check name. | ||||
packet-size integer |
Packet size of a twamp test session, | ||||
password string |
no description | ||||
port integer |
Port number used to communicate with the server over the selected protocol. | ||||
protocol string |
|
Protocol used to determine if the FortiGate can communicate with the server. | |||
recoverytime integer |
Number of successful responses received before server is considered recovered (1 - 3600, default = 5). | ||||
security-mode string |
|
Twamp controller security mode. | |||
server string |
no description | ||||
sla list / elements=string |
no description | ||||
id integer |
SLA ID. | ||||
jitter-threshold integer |
Jitter for SLA to make decision in milliseconds. (0 - 10000000, default = 5). | ||||
latency-threshold integer |
Latency for SLA to make decision in milliseconds. (0 - 10000000, default = 5). | ||||
link-cost-factor list / elements=string |
|
no description | |||
packetloss-threshold integer |
Packet loss for SLA to make decision in percentage. (0 - 100, default = 0). | ||||
threshold-alert-jitter integer |
Alert threshold for jitter (ms, default = 0). | ||||
threshold-alert-latency integer |
Alert threshold for latency (ms, default = 0). | ||||
threshold-alert-packetloss integer |
Alert threshold for packet loss (percentage, default = 0). | ||||
threshold-warning-jitter integer |
Warning threshold for jitter (ms, default = 0). | ||||
threshold-warning-latency integer |
Warning threshold for latency (ms, default = 0). | ||||
threshold-warning-packetloss integer |
Warning threshold for packet loss (percentage, default = 0). | ||||
update-cascade-interface string |
|
Enable/disable update cascade interface. | |||
update-static-route string |
|
Enable/disable updating the static route. | |||
load-balance-mode string |
|
Algorithm or mode to use for load balancing Internet traffic to SD-WAN members. | |||
members list / elements=string |
no description | ||||
_dynamic-member string |
no description | ||||
comment string |
Comments. | ||||
gateway string |
The default gateway for this interface. Usually the default gateway of the Internet service provider that this interfa... | ||||
gateway6 string |
IPv6 gateway. | ||||
ingress-spillover-threshold integer |
Ingress spillover threshold for this interface (0 - 16776000 kbit/s). When this traffic volume threshold is reached, n... | ||||
interface string |
Interface name. | ||||
priority integer |
Priority of the interface (0 - 4294967295). Used for SD-WAN rules or priority rules. | ||||
seq-num integer |
Sequence number(1-255). | ||||
source string |
Source IP address used in the health-check packet to the server. | ||||
source6 string |
Source IPv6 address used in the health-check packet to the server. | ||||
spillover-threshold integer |
Egress spillover threshold for this interface (0 - 16776000 kbit/s). When this traffic volume threshold is reached, ne... | ||||
status string |
|
Enable/disable this interface in the SD-WAN. | |||
volume-ratio integer |
Measured volume ratio (this value / sum of all values = percentage of link volume, 0 - 255). | ||||
weight integer |
Weight of this interface for weighted load balancing. (0 - 255) More traffic is directed to interfaces with higher wei... | ||||
service list / elements=string |
no description | ||||
addr-mode string |
|
Address mode (IPv4 or IPv6). | |||
bandwidth-weight integer |
Coefficient of reciprocal of available bidirectional bandwidth in the formula of custom-profile-1. | ||||
default string |
|
Enable/disable use of SD-WAN as default service. | |||
dscp-forward string |
|
Enable/disable forward traffic DSCP tag. | |||
dscp-forward-tag string |
Forward traffic DSCP tag. | ||||
dscp-reverse string |
|
Enable/disable reverse traffic DSCP tag. | |||
dscp-reverse-tag string |
Reverse traffic DSCP tag. | ||||
dst string |
Destination address name. | ||||
dst-negate string |
|
Enable/disable negation of destination address match. | |||
dst6 string |
Destination address6 name. | ||||
end-port integer |
End destination port number. | ||||
gateway string |
|
Enable/disable SD-WAN service gateway. | |||
groups string |
User groups. | ||||
health-check string |
Health check. | ||||
hold-down-time integer |
Waiting period in seconds when switching from the back-up member to the primary member (0 - 10000000, default = 0). | ||||
id integer |
Priority rule ID (1 - 4000). | ||||
internet-service string |
|
Enable/disable use of Internet service for application-based load balancing. | |||
internet-service-ctrl integer |
no description | ||||
internet-service-ctrl-group string |
Control-based Internet Service group list. | ||||
internet-service-custom string |
Custom Internet service name list. | ||||
internet-service-custom-group string |
Custom Internet Service group list. | ||||
internet-service-group string |
Internet Service group list. | ||||
internet-service-id string |
Internet service ID list. | ||||
jitter-weight integer |
Coefficient of jitter in the formula of custom-profile-1. | ||||
latency-weight integer |
Coefficient of latency in the formula of custom-profile-1. | ||||
link-cost-factor string |
|
Link cost factor. | |||
link-cost-threshold integer |
Percentage threshold change of link cost values that will result in policy route regeneration (0 - 10000000, default =... | ||||
member string |
Member sequence number. | ||||
mode string |
|
Control how the priority rule sets the priority of interfaces in the SD-WAN. | |||
name string |
Priority rule name. | ||||
packet-loss-weight integer |
Coefficient of packet-loss in the formula of custom-profile-1. | ||||
priority-members string |
Member sequence number list. | ||||
protocol integer |
Protocol number. | ||||
quality-link integer |
Quality grade. | ||||
route-tag integer |
IPv4 route map route-tag. | ||||
sla list / elements=string |
no description | ||||
health-check string |
Virtual WAN Link health-check. | ||||
id integer |
SLA ID. | ||||
src string |
Source address name. | ||||
src-negate string |
|
Enable/disable negation of source address match. | |||
src6 string |
Source address6 name. | ||||
start-port integer |
Start destination port number. | ||||
status string |
|
Enable/disable SD-WAN service. | |||
tos string |
Type of service bit pattern. | ||||
tos-mask string |
Type of service evaluated bits. | ||||
users string |
User name. | ||||
status string |
|
Enable/disable SD-WAN. | |||
workspace_locking_adom string |
the adom to lock for FortiManager running in workspace mode, the value can be global and others including root | ||||
workspace_locking_timeout integer |
Default: 300 |
the maximum time in seconds to wait for other user to release the workspace lock |
Notes
Note
- Running in workspace locking mode is supported in this FortiManager module, the top level parameters workspace_locking_adom and workspace_locking_timeout help do the work.
- To create or update an object, use state present directive.
- To delete an object, use state absent directive.
- Normally, running one module can fail when a non-zero rc is returned. you can also override the conditions to fail or succeed with parameters rc_failed and rc_succeeded
Examples
- hosts: fortimanager-inventory
collections:
- fortinet.fortimanager
connection: httpapi
vars:
ansible_httpapi_use_ssl: True
ansible_httpapi_validate_certs: False
ansible_httpapi_port: 443
tasks:
- name: Configure redundant internet connections using SD-WAN (formerly virtual WAN link).
fmgr_wanprof_system_virtualwanlink:
bypass_validation: False
workspace_locking_adom: <value in [global, custom adom including root]>
workspace_locking_timeout: 300
rc_succeeded: [0, -2, -3, ...]
rc_failed: [-2, -3, ...]
adom: <your own value>
wanprof: <your own value>
wanprof_system_virtualwanlink:
fail-detect: <value in [disable, enable]>
health-check:
-
_dynamic-server: <value of string>
addr-mode: <value in [ipv4, ipv6]>
failtime: <value of integer>
http-agent: <value of string>
http-get: <value of string>
http-match: <value of string>
interval: <value of integer>
members: <value of string>
name: <value of string>
packet-size: <value of integer>
password: <value of string>
port: <value of integer>
protocol: <value in [ping, tcp-echo, udp-echo, ...]>
recoverytime: <value of integer>
security-mode: <value in [none, authentication]>
server: <value of string>
sla:
-
id: <value of integer>
jitter-threshold: <value of integer>
latency-threshold: <value of integer>
link-cost-factor:
- latency
- jitter
- packet-loss
packetloss-threshold: <value of integer>
threshold-alert-jitter: <value of integer>
threshold-alert-latency: <value of integer>
threshold-alert-packetloss: <value of integer>
threshold-warning-jitter: <value of integer>
threshold-warning-latency: <value of integer>
threshold-warning-packetloss: <value of integer>
update-cascade-interface: <value in [disable, enable]>
update-static-route: <value in [disable, enable]>
load-balance-mode: <value in [source-ip-based, weight-based, usage-based, ...]>
members:
-
_dynamic-member: <value of string>
comment: <value of string>
gateway: <value of string>
gateway6: <value of string>
ingress-spillover-threshold: <value of integer>
interface: <value of string>
priority: <value of integer>
seq-num: <value of integer>
source: <value of string>
source6: <value of string>
spillover-threshold: <value of integer>
status: <value in [disable, enable]>
volume-ratio: <value of integer>
weight: <value of integer>
service:
-
addr-mode: <value in [ipv4, ipv6]>
bandwidth-weight: <value of integer>
default: <value in [disable, enable]>
dscp-forward: <value in [disable, enable]>
dscp-forward-tag: <value of string>
dscp-reverse: <value in [disable, enable]>
dscp-reverse-tag: <value of string>
dst: <value of string>
dst-negate: <value in [disable, enable]>
dst6: <value of string>
end-port: <value of integer>
gateway: <value in [disable, enable]>
groups: <value of string>
health-check: <value of string>
hold-down-time: <value of integer>
id: <value of integer>
internet-service: <value in [disable, enable]>
internet-service-ctrl: <value of integer>
internet-service-ctrl-group: <value of string>
internet-service-custom: <value of string>
internet-service-custom-group: <value of string>
internet-service-group: <value of string>
internet-service-id: <value of string>
jitter-weight: <value of integer>
latency-weight: <value of integer>
link-cost-factor: <value in [latency, jitter, packet-loss, ...]>
link-cost-threshold: <value of integer>
member: <value of string>
mode: <value in [auto, manual, priority, ...]>
name: <value of string>
packet-loss-weight: <value of integer>
priority-members: <value of string>
protocol: <value of integer>
quality-link: <value of integer>
route-tag: <value of integer>
sla:
-
health-check: <value of string>
id: <value of integer>
src: <value of string>
src-negate: <value in [disable, enable]>
src6: <value of string>
start-port: <value of integer>
status: <value in [disable, enable]>
tos: <value of string>
tos-mask: <value of string>
users: <value of string>
status: <value in [disable, enable]>
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
request_url string |
always |
The full url requested
Sample: /sys/login/user |
response_code integer |
always |
The status of api request
|
response_message string |
always |
The descriptive message of the api response
Sample: OK. |
Authors
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Frank Shen (@fshen01)
- Hongbin Lu (@fgtdev-hblu)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/fortinet/fortimanager/fmgr_wanprof_system_virtualwanlink_module.html