dellemc.openmanage.idrac_network – Configures the iDRAC network attributes
dellemc.openmanage.idrac_network – Configures the iDRAC network attributes
Note
This plugin is part of the dellemc.openmanage collection (version 3.0.0).
To install it use: ansible-galaxy collection install dellemc.openmanage
.
To use it in a playbook, specify: dellemc.openmanage.idrac_network
.
New in version 2.1.0: of dellemc.openmanage
Synopsis
- This module allows to configure iDRAC network settings.
Requirements
The below requirements are needed on the host that executes this module.
- omsdk
- python >= 2.7.5
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
auto_config string |
|
Allows to enable or disable auto-provisioning to automatically acquire domain name from DHCP. |
auto_detect string |
|
Allows to auto detect the available NIC types used by iDRAC. |
auto_negotiation string |
|
Allows iDRAC to automatically set the duplex mode and network speed. |
dns_from_dhcp string |
|
Allows to enable DHCP to obtain DNS server address. |
dns_idrac_name string |
Name of the DNS to register iDRAC. | |
duplex_mode string |
|
Select the type of data transmission for the NIC. |
enable_dhcp string |
|
Allows to enable or disable Dynamic Host Configuration Protocol (DHCP) in iDRAC. |
enable_ipv4 string |
|
Allows to enable or disable IPv4 configuration. |
enable_nic string |
|
Allows to enable or disable the Network Interface Controller (NIC) used by iDRAC. |
failover_network string |
|
Select one of the remaining LOMs. If a network fails, the traffic is routed through the failover network. |
idrac_ip string / required |
iDRAC IP Address. | |
idrac_password string / required |
iDRAC user password.
| |
idrac_port integer |
Default: 443 |
iDRAC port. |
idrac_user string / required |
iDRAC username. | |
ip_address string |
Enter a valid iDRAC static IPv4 address. | |
network_speed string |
|
Select the network speed for the selected NIC. |
nic_mtu integer |
Maximum Transmission Unit of the NIC. | |
nic_selection string |
|
Select one of the available NICs. |
register_idrac_on_dns string |
|
Registers iDRAC on a Domain Name System (DNS). |
setup_idrac_nic_vlan string |
|
Allows to configure VLAN on iDRAC. |
share_mnt string |
Local mount path of the network share with read-write permission for ansible user. This option is mandatory for network shares. | |
share_name string / required |
Network share or a local path. | |
share_password string |
Network share user password. This option is mandatory for CIFS share.
| |
share_user string |
Network share user name. Use the format 'user@domain' or 'domain\\user' if user is part of a domain. This option is mandatory for CIFS share. | |
static_dns string |
Enter the static DNS domain name. | |
static_dns_1 string |
Enter the preferred static DNS server IPv4 address. | |
static_dns_2 string |
Enter the preferred static DNS server IPv4 address. | |
static_gateway string |
Enter the static IPv4 gateway address to iDRAC. | |
static_net_mask string |
Enter the static IP subnet mask to iDRAC. | |
vlan_id integer |
Enter the VLAN ID. The VLAN ID must be a number from 1 through 4094. | |
vlan_priority integer |
Enter the priority for the VLAN ID. The priority value must be a number from 0 through 7. |
Notes
Note
- Run this module from a system that has direct access to DellEMC iDRAC.
- This module supports
check_mode
.
Examples
---
- name: Configure iDRAC network settings
dellemc.openmanage.idrac_network:
idrac_ip: "192.168.0.1"
idrac_user: "user_name"
idrac_password: "user_password"
share_name: "192.168.0.1:/share"
share_password: "share_pwd"
share_user: "share_user"
share_mnt: "/mnt/share"
register_idrac_on_dns: Enabled
dns_idrac_name: None
auto_config: None
static_dns: None
setup_idrac_nic_vlan: Enabled
vlan_id: 0
vlan_priority: 1
enable_nic: Enabled
nic_selection: Dedicated
failover_network: T_None
auto_detect: Disabled
auto_negotiation: Enabled
network_speed: T_1000
duplex_mode: Full
nic_mtu: 1500
ip_address: "192.168.0.1"
enable_dhcp: Enabled
enable_ipv4: Enabled
static_dns_1: "192.168.0.1"
static_dns_2: "192.168.0.1"
dns_from_dhcp: Enabled
static_gateway: None
static_net_mask: None
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
error_info dictionary |
on HTTP error |
Details of the HTTP Error.
Sample: {'error': {'@Message.ExtendedInfo': [{'Message': 'Unable to process the request because an error occurred.', 'MessageArgs': [], 'MessageId': 'GEN1234', 'RelatedProperties': [], 'Resolution': 'Retry the operation. If the issue persists, contact your system administrator.', 'Severity': 'Critical'}], 'code': 'Base.1.0.GeneralError', 'message': 'A general error has occurred. See ExtendedInfo for more information.'}} |
msg string |
always |
Successfully configured the idrac network settings.
Sample: Successfully configured the idrac network settings. |
network_status dictionary |
success |
Status of the Network settings operation job.
Sample: {'@odata.context': '/redfish/v1/$metadata#DellJob.DellJob', '@odata.id': '/redfish/v1/Managers/iDRAC.Embedded.1/Jobs/JID_856418531008', '@odata.type': '#DellJob.v1_0_2.DellJob', 'CompletionTime': '2020-03-31T03:04:15', 'Description': 'Job Instance', 'EndTime': None, 'Id': 'JID_856418531008', 'JobState': 'Completed', 'JobType': 'ImportConfiguration', 'Message': 'Successfully imported and applied Server Configuration Profile.', 'MessageArgs': [], '[email protected]': 0, 'MessageId': 'SYS053', 'Name': 'Import Configuration', 'PercentComplete': 100, 'StartTime': 'TIME_NOW', 'Status': 'Success', 'TargetSettingsURI': None, 'retval': True} |
Authors
- Felix Stephen (@felixs88)
- Anooja Vardhineni (@anooja-vardhineni)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/dellemc/openmanage/idrac_network_module.html