community.network.ce_vxlan_gateway – Manages gateway for the VXLAN network on HUAWEI CloudEngine devices.
community.network.ce_vxlan_gateway – Manages gateway for the VXLAN network on HUAWEI CloudEngine devices.
Note
This plugin is part of the community.network collection (version 2.0.1).
To install it use: ansible-galaxy collection install community.network
.
To use it in a playbook, specify: community.network.ce_vxlan_gateway
.
Synopsis
- Configuring Centralized All-Active Gateways or Distributed Gateway for the VXLAN Network on HUAWEI CloudEngine devices.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
arp_direct_route string |
|
Enable VLINK direct route on VBDIF interface. |
arp_distribute_gateway string |
|
Enable the distributed gateway function on VBDIF interface. |
dfs_all_active string |
|
Creates all-active gateways. |
dfs_id string |
Specifies the ID of a DFS group. The value must be 1. | |
dfs_peer_ip string |
Configure the IP address of an all-active gateway peer. The value is in dotted decimal notation. | |
dfs_peer_vpn string |
Specifies the name of the VPN instance that is associated with all-active gateway peer. The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. The value | |
dfs_source_ip string |
Specifies the IPv4 address bound to a DFS group. The value is in dotted decimal notation. | |
dfs_source_vpn string |
Specifies the name of a VPN instance bound to a DFS group. The value is a string of 1 to 31 case-sensitive characters without spaces. If the character string is quoted by double quotation marks, the character string can contain spaces. The value | |
dfs_udp_port string |
Specifies the UDP port number of the DFS group. The value is an integer that ranges from 1025 to 65535. | |
state string |
|
Determines whether the config should be present or not on the device. |
vbdif_bind_vpn string |
Specifies the name of the VPN instance that is associated with the interface. The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. The value | |
vbdif_mac string |
Specifies a MAC address for a VBDIF interface. The value is in the format of H-H-H. Each H is a 4-digit hexadecimal number, such as | |
vbdif_name string |
Full name of VBDIF interface, i.e. Vbdif100. | |
vpn_instance string |
Specifies the name of a VPN instance. The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. The value | |
vpn_vni string |
Specifies a VNI ID. Binds a VXLAN network identifier (VNI) to a virtual private network (VPN) instance. The value is an integer ranging from 1 to 16000000. |
Notes
Note
- Ensure All-Active Gateways or Distributed Gateway for the VXLAN Network can not configure at the same time.
- Recommended connection is
network_cli
. - This module also works with
local
connections for legacy playbooks.
Examples
- name: Vxlan gateway module test
hosts: ce128
connection: local
gather_facts: no
vars:
cli:
host: "{{ inventory_hostname }}"
port: "{{ ansible_ssh_port }}"
username: "{{ username }}"
password: "{{ password }}"
transport: cli
tasks:
- name: Configuring Centralized All-Active Gateways for the VXLAN Network
community.network.ce_vxlan_gateway:
dfs_id: 1
dfs_source_ip: 6.6.6.6
dfs_all_active: enable
dfs_peer_ip: 7.7.7.7
provider: "{{ cli }}"
- name: Bind the VPN instance to a Layer 3 gateway, enable distributed gateway, and configure host route advertisement.
community.network.ce_vxlan_gateway:
vbdif_name: Vbdif100
vbdif_bind_vpn: vpn1
arp_distribute_gateway: enable
arp_direct_route: enable
provider: "{{ cli }}"
- name: Assign a VNI to a VPN instance.
community.network.ce_vxlan_gateway:
vpn_instance: vpn1
vpn_vni: 100
provider: "{{ cli }}"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
changed boolean |
always |
check to see if a change was made on the device
Sample: True |
end_state dictionary |
verbose mode |
k/v pairs of configuration after module execution
Sample: {'dfs_all_active': 'enable', 'dfs_id': '1', 'evn_peers': [{'ip': '7.7.7.7', 'vpn': }], 'evn_source_ip': '6.6.6.6', 'evn_source_vpn': None} |
existing dictionary |
verbose mode |
k/v pairs of existing configuration
Sample: {'dfs_all_active': 'disable', 'dfs_id': '1', 'dfs_source_ip': None, 'evn_peer_ip': []} |
proposed dictionary |
verbose mode |
k/v pairs of parameters passed into module
Sample: {'dfs_all_active': 'enable', 'dfs_id': '1', 'dfs_peer_ip': '7.7.7.7', 'dfs_source_ip': '6.6.6.6'} |
updates list / elements=string |
always |
commands sent to the device
Sample: ['dfs-group 1', 'source ip 6.6.6.6', 'active-active-gateway', 'peer 7.7.7.7'] |
Authors
- QijunPan (@QijunPan)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/community/network/ce_vxlan_gateway_module.html