cisco.nxos.nxos_ospf_interfaces – OSPF Interfaces Resource Module.
cisco.nxos.nxos_ospf_interfaces – OSPF Interfaces Resource Module.
Note
This plugin is part of the cisco.nxos collection (version 1.4.0).
To install it use: ansible-galaxy collection install cisco.nxos
.
To use it in a playbook, specify: cisco.nxos.nxos_ospf_interfaces
.
New in version 1.3.0: of cisco.nxos
Synopsis
- This module manages OSPF(v2/v3) configuration of interfaces on devices running Cisco NX-OS.
Parameters
Parameter | Choices/Defaults | Comments | ||||
---|---|---|---|---|---|---|
config list / elements=dictionary |
A list of OSPF configuration for interfaces. | |||||
address_family list / elements=dictionary |
OSPF settings on the interfaces in address-family context. | |||||
afi string / required |
|
Address Family Identifier (AFI) for OSPF settings on the interfaces. | ||||
authentication dictionary |
Authentication settings on the interface. | |||||
enable boolean |
|
Enable/disable authentication on the interface. | ||||
key_chain string |
Authentication password key-chain. | |||||
message_digest boolean |
|
Use message-digest authentication. | ||||
null_auth boolean |
|
Use null(disable) authentication. | ||||
authentication_key dictionary |
Configure the authentication key for the interface. | |||||
encryption integer |
0 Specifies an UNENCRYPTED authentication key will follow. 3 Specifies an 3DES ENCRYPTED authentication key will follow. 7 Specifies a Cisco type 7 ENCRYPTED authentication key will follow. | |||||
key string / required |
Authentication key. Valid values are Cisco type 7 ENCRYPTED password, 3DES ENCRYPTED password and UNENCRYPTED (cleartext) password based on the value of encryption key. | |||||
cost integer |
Cost associated with interface. | |||||
dead_interval integer |
Dead interval value (in seconds). | |||||
hello_interval integer |
Hello interval value (in seconds). | |||||
instance integer |
Instance identifier. | |||||
message_digest_key dictionary |
Message digest authentication password (key) settings. | |||||
encryption integer |
0 Specifies an UNENCRYPTED ospf password (key) will follow. 3 Specifies an 3DES ENCRYPTED ospf password (key) will follow. 7 Specifies a Cisco type 7 ENCRYPTED the ospf password (key) will follow. | |||||
key string / required |
Authentication key. Valid values are Cisco type 7 ENCRYPTED password, 3DES ENCRYPTED password and UNENCRYPTED (cleartext) password based on the value of encryption key. | |||||
key_id integer / required |
Key ID. | |||||
mtu_ignore boolean |
|
Enable/disable OSPF MTU mismatch detection. | ||||
multi_areas list / elements=string |
Multi-Areas associated with interface (not tied to OSPF process). Valid values are Area Ids as an integer or IP address. | |||||
network string |
|
Network type. | ||||
passive_interface boolean |
|
Suppress routing updates on the interface. | ||||
priority integer |
Router priority. | |||||
processes list / elements=dictionary |
Interfaces configuration for an OSPF process. | |||||
area dictionary |
Area associated with interface. | |||||
area_id string / required |
Area ID as a decimal or IP address format. | |||||
secondaries boolean |
|
Do not include secondary IPv4/IPv6 addresses. | ||||
multi_areas list / elements=string |
Multi-Areas associated with interface. Valid values are Area Ids as an integer or IP address. | |||||
process_id string / required |
OSPF process tag. | |||||
retransmit_interval integer |
Packet retransmission interval. | |||||
shutdown boolean |
|
Shutdown OSPF on this interface. | ||||
transmit_delay integer |
Packet transmission delay. | |||||
name string / required |
Name/Identifier of the interface. | |||||
running_config string |
This option is used only with state parsed. The value of this option should be the output received from the NX-OS device by executing the command show running-config | section "^interface". The state parsed reads the configuration from | |||||
state string |
|
The state the configuration should be left in. |
Examples
# Using merged
# Before state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# interface Ethernet1/2
# no switchport
# interface Ethernet1/3
# no switchport
- name: Merge the provided configuration with the exisiting running configuration
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
address_family:
- afi: ipv4
processes:
- process_id: "100"
area:
area_id: 1.1.1.1
secondaries: False
multi_areas:
- 11.11.11.11
- afi: ipv6
processes:
- process_id: "200"
area:
area_id: 2.2.2.2
multi_areas:
- 21.0.0.0
- process_id: "300"
multi_areas:
- 50.50.50.50
multi_areas:
- 16.10.10.10
- name: Ethernet1/2
address_family:
- afi: ipv4
authentication:
enable: True
key_chain: test-1
message_digest_key:
key_id: 10
encryption: 3
key: abc01d272be25d29
cost: 100
- afi: ipv6
network: broadcast
shutdown: True
- name: Ethernet1/3
address_family:
- afi: ipv4
authentication_key:
encryption: 7
key: 12090404011C03162E
state: merged
# Task output
# -------------
# "before": [
# {
# "name": "Ethernet1/1"
# },
# {
# "name": "Ethernet1/2"
# },
# {
# "name": "Ethernet1/3"
# },
# ]
#
# "commands": [
# "interface Ethernet1/1",
# "ip router ospf multi-area 11.11.11.11",
# "ip router ospf 100 area 1.1.1.1 secondaries none",
# "ipv6 router ospfv3 multi-area 16.10.10.10",
# "ipv6 router ospfv3 200 area 2.2.2.2",
# "ipv6 router ospfv3 200 multi-area 21.0.0.0",
# "ipv6 router ospfv3 300 multi-area 50.50.50.50",
# "interface Ethernet1/2",
# "ip ospf authentication key-chain test-1",
# "ip ospf authentication",
# "ip ospf message-digest-key 10 md5 3 abc01d272be25d29",
# "ip ospf cost 100",
# "ospfv3 network broadcast",
# "ospfv3 shutdown",
# "interface Ethernet1/3",
# "ip ospf authentication-key 7 12090404011C03162E"
# ]
#
# "after": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.11"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# },
# {
# "afi": "ipv6",
# "multi_areas": [
# "16.10.10.10"
# ],
# "processes": [
# {
# "area": {
# "area_id": "2.2.2.2"
# },
# "multi_areas": [
# "21.0.0.0"
# ],
# "process_id": "200"
# },
# {
# "multi_areas": [
# "50.50.50.50"
# ],
# "process_id": "300"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
# After state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
# Using replaced
# Before state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
- name: Replace OSPF configurations of listed interfaces with provided configurations
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
address_family:
- afi: ipv4
processes:
- process_id: "100"
area:
area_id: 1.1.1.1
secondaries: False
multi_areas:
- 11.11.11.12
- name: Ethernet1/3
state: replaced
# Task output
# -------------
# "before": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.11"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# },
# {
# "afi": "ipv6",
# "multi_areas": [
# "16.10.10.10"
# ],
# "processes": [
# {
# "area": {
# "area_id": "2.2.2.2"
# },
# "multi_areas": [
# "21.0.0.0"
# ],
# "process_id": "200"
# },
# {
# "multi_areas": [
# "50.50.50.50"
# ],
# "process_id": "300"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
#
# "commands": [
# "interface Ethernet1/1",
# "ip router ospf multi-area 11.11.11.12",
# "no ip router ospf multi-area 11.11.11.11",
# "no ipv6 router ospfv3 multi-area 16.10.10.10",
# "no ipv6 router ospfv3 200 area 2.2.2.2",
# "no ipv6 router ospfv3 200 multi-area 21.0.0.0",
# "no ipv6 router ospfv3 300 multi-area 50.50.50.50",
# "interface Ethernet1/3",
# "no ip ospf authentication-key 7 12090404011C03162E"
# ]
#
# "after": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.12"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "name": "Ethernet1/3"
# },
#
# After state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.12
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# Using overridden
# Before state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
- name: Overridde all OSPF interfaces configuration with provided configuration
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
address_family:
- afi: ipv4
processes:
- process_id: "100"
area:
area_id: 1.1.1.1
secondaries: False
multi_areas:
- 11.11.11.12
state: overridden
# Task output
# -------------
# "before": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.11"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# },
# {
# "afi": "ipv6",
# "multi_areas": [
# "16.10.10.10"
# ],
# "processes": [
# {
# "area": {
# "area_id": "2.2.2.2"
# },
# "multi_areas": [
# "21.0.0.0"
# ],
# "process_id": "200"
# },
# {
# "multi_areas": [
# "50.50.50.50"
# ],
# "process_id": "300"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
#
# "commands": [
# "interface Ethernet1/2",
# "no ip ospf authentication key-chain test-1",
# "no ip ospf authentication",
# "no ip ospf message-digest-key 10 md5 3 abc01d272be25d29",
# "no ip ospf cost 100",
# "no ospfv3 network broadcast",
# "no ospfv3 shutdown",
# "interface Ethernet1/3",
# "no ip ospf authentication-key 7 12090404011C03162E",
# "interface Ethernet1/1",
# "ip router ospf multi-area 11.11.11.12",
# "no ip router ospf multi-area 11.11.11.11",
# "no ipv6 router ospfv3 multi-area 16.10.10.10",
# "no ipv6 router ospfv3 200 area 2.2.2.2",
# "no ipv6 router ospfv3 200 multi-area 21.0.0.0",
# "no ipv6 router ospfv3 300 multi-area 50.50.50.50"
# ]
#
# "after": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.12"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "name": "Ethernet1/2"
# },
# {
# "name": "Ethernet1/3"
# },
# ]
# After state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.12
# interface Ethernet1/2
# no switchport
# interface Ethernet1/3
# no switchport
# Using deleted to delete OSPF config of a single interface
# Before state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
- name: Delete OSPF config from a single interface
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
state: deleted
# Task output
# -------------
# "before": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.11"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# },
# {
# "afi": "ipv6",
# "multi_areas": [
# "16.10.10.10"
# ],
# "processes": [
# {
# "area": {
# "area_id": "2.2.2.2"
# },
# "multi_areas": [
# "21.0.0.0"
# ],
# "process_id": "200"
# },
# {
# "multi_areas": [
# "50.50.50.50"
# ],
# "process_id": "300"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
#
# "commands": [
# "interface Ethernet1/1",
# "no ip router ospf multi-area 11.11.11.11",
# "no ip router ospf 100 area 1.1.1.1 secondaries none",
# "no ipv6 router ospfv3 multi-area 16.10.10.10",
# "no ipv6 router ospfv3 200 area 2.2.2.2",
# "no ipv6 router ospfv3 200 multi-area 21.0.0.0",
# "no ipv6 router ospfv3 300 multi-area 50.50.50.50"
# ]
#
# "before": [
# {
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
# After state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
# Using deleted to delete OSPF config from all interfaces
# Before state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
- name: Delete OSPF config from all interfaces
cisco.nxos.nxos_ospf_interfaces:
state: deleted
# Task output
# -------------
# "before": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.11"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# },
# {
# "afi": "ipv6",
# "multi_areas": [
# "16.10.10.10"
# ],
# "processes": [
# {
# "area": {
# "area_id": "2.2.2.2"
# },
# "multi_areas": [
# "21.0.0.0"
# ],
# "process_id": "200"
# },
# {
# "multi_areas": [
# "50.50.50.50"
# ],
# "process_id": "300"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
#
# "commands": [
# "interface Ethernet1/1",
# "no ip router ospf multi-area 11.11.11.11",
# "no ip router ospf 100 area 1.1.1.1 secondaries none",
# "no ipv6 router ospfv3 multi-area 16.10.10.10",
# "no ipv6 router ospfv3 200 area 2.2.2.2",
# "no ipv6 router ospfv3 200 multi-area 21.0.0.0",
# "no ipv6 router ospfv3 300 multi-area 50.50.50.50",
# "interface Ethernet1/2",
# "no ip ospf authentication key-chain test-1",
# "no ip ospf authentication",
# "no ip ospf message-digest-key 10 md5 3 abc01d272be25d29",
# "no ip ospf cost 100",
# "no ospfv3 network broadcast",
# "no ospfv3 shutdown",
# "interface Ethernet1/3",
# "no ip ospf authentication-key 7 12090404011C03162E"
# ]
#
# "after": [
# {
# "name": "Ethernet1/1"
# },
# {
# "name": "Ethernet1/2"
# },
# {
# "name": "Ethernet1/3"
# },
# ]
# After state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# interface Ethernet1/2
# no switchport
# interface Ethernet1/3
# no switchport
# Using rendered
- name: Render platform specific configuration lines with state rendered (without connecting to the device)
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
address_family:
- afi: ipv4
processes:
- process_id: "100"
area:
area_id: 1.1.1.1
secondaries: False
multi_areas:
- 11.11.11.11
- afi: ipv6
processes:
- process_id: "200"
area:
area_id: 2.2.2.2
multi_areas:
- 21.0.0.0
- process_id: "300"
multi_areas:
- 50.50.50.50
multi_areas:
- 16.10.10.10
- name: Ethernet1/2
address_family:
- afi: ipv4
authentication:
enable: True
key_chain: test-1
message_digest_key:
key_id: 10
encryption: 3
key: abc01d272be25d29
cost: 100
- afi: ipv6
network: broadcast
shutdown: True
- name: Ethernet1/3
address_family:
- afi: ipv4
authentication_key:
encryption: 7
key: 12090404011C03162E
state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": [
# "interface Ethernet1/1",
# "ip router ospf multi-area 11.11.11.11",
# "ip router ospf 100 area 1.1.1.1 secondaries none",
# "ipv6 router ospfv3 multi-area 16.10.10.10",
# "ipv6 router ospfv3 200 area 2.2.2.2",
# "ipv6 router ospfv3 200 multi-area 21.0.0.0",
# "ipv6 router ospfv3 300 multi-area 50.50.50.50",
# "interface Ethernet1/2",
# "ip ospf authentication key-chain test-1",
# "ip ospf authentication",
# "ip ospf message-digest-key 10 md5 3 abc01d272be25d29",
# "ip ospf cost 100",
# "ospfv3 network broadcast",
# "ospfv3 shutdown",
# "interface Ethernet1/3",
# "ip ospf authentication-key 7 12090404011C03162E"
# ]
# Using parsed
# parsed.cfg
# ------------
# interface Ethernet1/1
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# ipv6 router ospfv3 multi-area 16.10.10.10
# interface Ethernet1/2
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# ip ospf authentication-key 7 12090404011C03162E
- name: arse externally provided OSPF interfaces config
cisco.nxos.nxos_ospf_interfaces:
running_config: "{{ lookup('file', 'ospf_interfaces.cfg') }}"
state: parsed
# Task output (redacted)
# -----------------------
# "parsed": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.11"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# },
# {
# "afi": "ipv6",
# "multi_areas": [
# "16.10.10.10"
# ],
# "processes": [
# {
# "area": {
# "area_id": "2.2.2.2"
# },
# "multi_areas": [
# "21.0.0.0"
# ],
# "process_id": "200"
# },
# {
# "multi_areas": [
# "50.50.50.50"
# ],
# "process_id": "300"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
# Using gathered
# On-box config
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.12
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# Task output (redacted)
# -----------------------
# "gathered": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.12"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "name": "Ethernet1/3"
# },
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
after list / elements=string |
when changed |
The resulting configuration model invocation.
Sample: The configuration returned will always be in the same format of the parameters above. |
before list / elements=string |
always |
The configuration prior to the model invocation.
Sample: The configuration returned will always be in the same format of the parameters above. |
commands list / elements=string |
always |
The set of commands pushed to the remote device.
Sample: ['interface Ethernet1/1', 'ip router ospf multi-area 11.11.11.11', 'ip router ospf 100 area 1.1.1.1 secondaries none', 'no ipv6 router ospfv3 multi-area 16.10.10.10', 'ipv6 router ospfv3 200 area 2.2.2.2', 'ipv6 router ospfv3 200 multi-area 21.0.0.0', 'ipv6 router ospfv3 300 multi-area 50.50.50.50', 'interface Ethernet1/2', 'no ip ospf authentication key-chain test-1', 'ip ospf authentication'] |
Authors
- Nilashish Chakraborty (@NilashishC)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/cisco/nxos/nxos_ospf_interfaces_module.html