cisco.nxos.nxos_hsrp_interfaces – HSRP interfaces resource module

Note

This plugin is part of the cisco.nxos collection (version 1.4.0).

To install it use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_hsrp_interfaces.

New in version 1.0.0: of cisco.nxos

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

Manages Hot Standby Router Protocol (HSRP) interface attributes.

Note

This module has a corresponding action plugin.

Parameters

Parameter		Choices/Defaults	Comments
config list / elements=dictionary			The provided configuration
	bfd string	enable disable	Enable/Disable HSRP Bidirectional Forwarding Detection (BFD) on the interface.
	name string		The name of the interface.
running_config string			This option is used only with state parsed. The value of this option should be the output received from the NX-OS device by executing the command show running-config \| section '^interface'. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string		merged ← replaced overridden deleted gathered rendered parsed	The state the configuration should be left in

Notes

Note

Tested against NX-OS 7.0(3)I5(1).
Feature bfd should be enabled for this module.

Examples

# Using deleted

- name: Configure hsrp attributes on interfaces
  cisco.nxos.nxos_hsrp_interfaces:
    config:
    - name: Ethernet1/1
    - name: Ethernet1/2
    operation: deleted


# Using merged

- name: Configure hsrp attributes on interfaces
  cisco.nxos.nxos_hsrp_interfaces:
    config:
    - name: Ethernet1/1
      bfd: enable
    - name: Ethernet1/2
      bfd: disable
    operation: merged


# Using overridden

- name: Configure hsrp attributes on interfaces
  cisco.nxos.nxos_hsrp_interfaces:
    config:
    - name: Ethernet1/1
      bfd: enable
    - name: Ethernet1/2
      bfd: disable
    operation: overridden


# Using replaced

- name: Configure hsrp attributes on interfaces
  cisco.nxos.nxos_hsrp_interfaces:
    config:
    - name: Ethernet1/1
      bfd: enable
    - name: Ethernet1/2
      bfd: disable
    operation: replaced

# Using rendered

- name: Use rendered state to convert task input to device specific commands
  cisco.nxos.nxos_hsrp_interfaces:
    config:
    - name: Ethernet1/800
      bfd: enable
    - name: Ethernet1/801
      bfd: enable
    state: rendered

# Task Output (redacted)
# -----------------------

# rendered:
#   - "interface Ethernet1/800"
#   - "hsrp bfd"
#   - "interface Ethernet1/801"
#   - "hsrp bfd"

# Using parsed

# parsed.cfg
# ------------
# interface Ethernet1/800
#   no switchport
#   hsrp bfd
# interface Ethernet1/801
#   no switchport
#   hsrp bfd

- name: Use parsed state to convert externally supplied config to structured format
  cisco.nxos.nxos_hsrp_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task output (redacted)
# -----------------------

# parsed:
#   - name: Ethernet1/800
#     bfd: enable
#   - name: Ethernet1/801
#     bfd: enable

# Using gathered

# Existing device config state
# -------------------------------

# interface Ethernet1/1
#   no switchport
#   hsrp bfd
# interface Ethernet1/2
#   no switchport
#   hsrp bfd
# interface Ethernet1/3
#   no switchport

- name: Gather hsrp_interfaces facts from the device using nxos_hsrp_interfaces
  cisco.nxos.nxos_hsrp_interfaces:
    state: gathered

# Task output (redacted)
# -----------------------

# gathered:
#   - name: Ethernet1/1
#     bfd: enable
#   - name: Ethernet1/2
#     bfd: enable

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list / elements=string	when changed	The resulting configuration model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
before list / elements=string	always	The configuration prior to the model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device. Sample: ['interface Ethernet1/1', 'hsrp bfd']

Authors

Chris Van Heuveln (@chrisvanheuveln)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/cisco/nxos/nxos_hsrp_interfaces_module.html